Bootloaders/CDC/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make doxygen = Generate DoxyGen documentation for the project (must have
  36 #                DoxyGen installed)
  37 #
  38 # make debug = Start either simulavr or avarice as specified for debugging,
  39 #              with avr-gdb or avr-insight as the front end for debugging.
  40 #
  41 # make filename.s = Just compile filename.c into the assembler code only.
  42 #
  43 # make filename.i = Create a preprocessed source file for use in submitting
  44 #                   bug reports to the GCC project.
  45 #
  46 # To rebuild project do "make clean" then "make all".
  47 #----------------------------------------------------------------------------
  48
  49
  50 # MCU name
  51 MCU = at90usb1287
  52
  53
  54 # Target architecture (see library "Board Types" documentation).
  55 ARCH = AVR8
  56
  57
  58 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  59 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  60 # "Board" inside the application directory.
  61 BOARD = USBKEY
  62
  63
  64 # Processor frequency.
  65 #     This will define a symbol, F_CPU, in all source code files equal to the
  66 #     processor frequency in Hz. You can then use this symbol in your source code to
  67 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  68 #     automatically to create a 32-bit value in your source code.
  69 #
  70 #     This will be an integer division of F_USB below, as it is sourced by
  71 #     F_USB after it has run through any CPU prescalers. Note that this value
  72 #     does not *change* the processor frequency - it should merely be updated to
  73 #     reflect the processor speed set externally so that the code can use accurate
  74 #     software delays.
  75 F_CPU = 8000000
  76
  77
  78 # Input clock frequency.
  79 #     This will define a symbol, F_USB, in all source code files equal to the
  80 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  81 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  82 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  83 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  84 #     at the end, this will be done automatically to create a 32-bit value in your
  85 #     source code.
  86 #
  87 #     If no clock division is performed on the input clock inside the AVR (via the
  88 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  89 F_USB = $(F_CPU)
  90
  91
  92 # Starting byte address of the bootloader, as a byte address - computed via the formula
  93 #   BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
  94 #
  95 # Note that the bootloader size and start address given in AVRStudio is in words and not
  96 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
  97 FLASH_SIZE_KB        = 128
  98 BOOT_SECTION_SIZE_KB = 8
  99
 100
 101 # Formulas used to calculate the starting address of the Bootloader section, and the User Application
 102 # API jump table (for more information on the latter, see the bootloader documentation). These formulas
 103 # should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
 104 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
 105 BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 96)" | bc)
 106
 107
 108 # Output format. (can be srec, ihex, binary)
 109 FORMAT = ihex
 110
 111
 112 # Target file name (without extension).
 113 TARGET = BootloaderCDC
 114
 115
 116 # Object files directory
 117 #     To put object files in current directory, use a dot (.), do NOT make
 118 #     this an empty or blank macro!
 119 OBJDIR = .
 120
 121
 122 # Path to the LUFA library
 123 LUFA_PATH = ../..
 124
 125
 126 # LUFA library compile-time options and predefined tokens
 127 LUFA_OPTS  = -D USB_DEVICE_ONLY
 128 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 129 LUFA_OPTS += -D ORDERED_EP_CONFIG
 130 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 131 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 132 LUFA_OPTS += -D USE_RAM_DESCRIPTORS
 133 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 134 LUFA_OPTS += -D NO_INTERNAL_SERIAL
 135 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 136 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 137 LUFA_OPTS += -D NO_SOF_EVENTS
 138
 139 #LUFA_OPTS += -D NO_BLOCK_SUPPORT
 140 #LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT
 141 #LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT
 142 #LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT
 143
 144
 145 # Create the LUFA source path variables by including the LUFA root makefile
 146 include $(LUFA_PATH)/LUFA/makefile
 147
 148
 149 # List C source files here. (C dependencies are automatically generated.)
 150 SRC = $(TARGET).c                                                 \
 151           BootloaderAPI.c                                             \
 152           Descriptors.c                                               \
 153           $(LUFA_SRC_USB)                                             \
 154
 155
 156 # List C++ source files here. (C dependencies are automatically generated.)
 157 CPPSRC =
 158
 159
 160 # List Assembler source files here.
 161 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 162 #     will not be considered source files but generated files (assembler
 163 #     output from the compiler), and will be deleted upon "make clean"!
 164 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 165 #     it will preserve the spelling of the filenames, and gcc itself does
 166 #     care about how the name is spelled on its command-line.
 167 ASRC = BootloaderAPITable.S
 168
 169
 170 # Optimization level, can be [0, 1, 2, 3, s].
 171 #     0 = turn off optimization. s = optimize for size.
 172 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 173 OPT = s
 174
 175
 176 # Debugging format.
 177 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 178 #     AVR Studio 4.10 requires dwarf-2.
 179 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 180 DEBUG = dwarf-2
 181
 182
 183 # List any extra directories to look for include files here.
 184 #     Each directory must be seperated by a space.
 185 #     Use forward slashes for directory separators.
 186 #     For a directory that has spaces, enclose it in quotes.
 187 EXTRAINCDIRS = $(LUFA_PATH)/
 188
 189
 190 # Compiler flag to set the C Standard level.
 191 #     c89   = "ANSI" C
 192 #     gnu89 = c89 plus GCC extensions
 193 #     c99   = ISO C99 standard (not yet fully implemented)
 194 #     gnu99 = c99 plus GCC extensions
 195 CSTANDARD = -std=c99
 196
 197
 198 # Place -D or -U options here for C sources
 199 CDEFS  = -DF_CPU=$(F_CPU)UL
 200 CDEFS += -DF_USB=$(F_USB)UL
 201 CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
 202 CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 203 CDEFS += $(LUFA_OPTS)
 204
 205
 206 # Place -D or -U options here for ASM sources
 207 ADEFS  = -DF_CPU=$(F_CPU)
 208 ADEFS += -DF_USB=$(F_USB)UL
 209 ADEFS += -DBOARD=BOARD_$(BOARD)
 210 ADEFS += -DBOOT_START_ADDR=$(BOOT_START)
 211 ADEFS += $(LUFA_OPTS)
 212
 213
 214 # Place -D or -U options here for C++ sources
 215 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 216 CPPDEFS += -DF_USB=$(F_USB)UL
 217 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 218 CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 219 CPPDEFS += $(LUFA_OPTS)
 220 #CPPDEFS += -D__STDC_LIMIT_MACROS
 221 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 222
 223
 224
 225 #---------------- Compiler Options C ----------------
 226 #  -g*:          generate debugging information
 227 #  -O*:          optimization level
 228 #  -f...:        tuning, see GCC manual and avr-libc documentation
 229 #  -Wall...:     warning level
 230 #  -Wa,...:      tell GCC to pass this to the assembler.
 231 #    -adhlns...: create assembler listing
 232 CFLAGS = -g$(DEBUG)
 233 CFLAGS += $(CDEFS)
 234 CFLAGS += -O$(OPT)
 235 CFLAGS += -funsigned-char
 236 CFLAGS += -funsigned-bitfields
 237 CFLAGS += -ffunction-sections
 238 CFLAGS += -fno-inline-small-functions
 239 CFLAGS += -fpack-struct
 240 CFLAGS += -fshort-enums
 241 CFLAGS += -fno-strict-aliasing
 242 CFLAGS += -Wall
 243 CFLAGS += -Wstrict-prototypes
 244 #CFLAGS += -mshort-calls
 245 #CFLAGS += -fno-unit-at-a-time
 246 #CFLAGS += -Wundef
 247 #CFLAGS += -Wunreachable-code
 248 #CFLAGS += -Wsign-compare
 249 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 250 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 251 CFLAGS += $(CSTANDARD)
 252
 253
 254 #---------------- Compiler Options C++ ----------------
 255 #  -g*:          generate debugging information
 256 #  -O*:          optimization level
 257 #  -f...:        tuning, see GCC manual and avr-libc documentation
 258 #  -Wall...:     warning level
 259 #  -Wa,...:      tell GCC to pass this to the assembler.
 260 #    -adhlns...: create assembler listing
 261 CPPFLAGS = -g$(DEBUG)
 262 CPPFLAGS += $(CPPDEFS)
 263 CPPFLAGS += -O$(OPT)
 264 CPPFLAGS += -funsigned-char
 265 CPPFLAGS += -funsigned-bitfields
 266 CPPFLAGS += -fpack-struct
 267 CPPFLAGS += -fshort-enums
 268 CPPFLAGS += -fno-exceptions
 269 CPPFLAGS += -Wall
 270 CPPFLAGS += -Wundef
 271 #CPPFLAGS += -mshort-calls
 272 #CPPFLAGS += -fno-unit-at-a-time
 273 #CPPFLAGS += -Wstrict-prototypes
 274 #CPPFLAGS += -Wunreachable-code
 275 #CPPFLAGS += -Wsign-compare
 276 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 277 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 278 #CPPFLAGS += $(CSTANDARD)
 279
 280
 281 #---------------- Assembler Options ----------------
 282 #  -Wa,...:   tell GCC to pass this to the assembler.
 283 #  -adhlns:   create listing
 284 #  -gstabs:   have the assembler create line number information; note that
 285 #             for use in COFF files, additional information about filenames
 286 #             and function names needs to be present in the assembler source
 287 #             files -- see avr-libc docs [FIXME: not yet described there]
 288 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 289 #       dump that will be displayed for a given single line of source input.
 290 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 291
 292
 293 #---------------- Library Options ----------------
 294 # Minimalistic printf version
 295 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 296
 297 # Floating point printf version (requires MATH_LIB = -lm below)
 298 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 299
 300 # If this is left blank, then it will use the Standard printf version.
 301 PRINTF_LIB =
 302 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 303 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 304
 305
 306 # Minimalistic scanf version
 307 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 308
 309 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 310 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 311
 312 # If this is left blank, then it will use the Standard scanf version.
 313 SCANF_LIB =
 314 #SCANF_LIB = $(SCANF_LIB_MIN)
 315 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 316
 317
 318 MATH_LIB = -lm
 319
 320
 321 # List any extra directories to look for libraries here.
 322 #     Each directory must be seperated by a space.
 323 #     Use forward slashes for directory separators.
 324 #     For a directory that has spaces, enclose it in quotes.
 325 EXTRALIBDIRS =
 326
 327
 328
 329 #---------------- External Memory Options ----------------
 330
 331 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 332 # used for variables (.data/.bss) and heap (malloc()).
 333 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 334
 335 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 336 # only used for heap (malloc()).
 337 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 338
 339 EXTMEMOPTS =
 340
 341
 342
 343 #---------------- Linker Options ----------------
 344 #  -Wl,...:     tell GCC to pass this to linker.
 345 #    -Map:      create map file
 346 #    --cref:    add cross reference to  map file
 347 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 348 LDFLAGS += -Wl,--section-start=.text=$(BOOT_START) -Wl,--section-start=.apitable=$(BOOT_API_TABLESTART) -Wl,--undefined=BootloaderAPI_JumpTable
 349 LDFLAGS += -Wl,--relax
 350 LDFLAGS += -Wl,--gc-sections
 351 LDFLAGS += $(EXTMEMOPTS)
 352 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 353 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 354 #LDFLAGS += -T linker_script.x
 355
 356
 357
 358 #---------------- Programming Options (avrdude) ----------------
 359
 360 # Programming hardware
 361 # Type: avrdude -c ?
 362 # to get a full listing.
 363 #
 364 AVRDUDE_PROGRAMMER = jtagmkII
 365
 366 # com1 = serial port. Use lpt1 to connect to parallel port.
 367 AVRDUDE_PORT = usb
 368
 369 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 370 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 371
 372
 373 # Uncomment the following if you want avrdude's erase cycle counter.
 374 # Note that this counter needs to be initialized first using -Yn,
 375 # see avrdude manual.
 376 #AVRDUDE_ERASE_COUNTER = -y
 377
 378 # Uncomment the following if you do /not/ wish a verification to be
 379 # performed after programming the device.
 380 #AVRDUDE_NO_VERIFY = -V
 381
 382 # Increase verbosity level.  Please use this when submitting bug
 383 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 384 # to submit bug reports.
 385 #AVRDUDE_VERBOSE = -v -v
 386
 387 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 388 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 389 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 390 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 391
 392
 393
 394 #---------------- Debugging Options ----------------
 395
 396 # For simulavr only - target MCU frequency.
 397 DEBUG_MFREQ = $(F_CPU)
 398
 399 # Set the DEBUG_UI to either gdb or insight.
 400 # DEBUG_UI = gdb
 401 DEBUG_UI = insight
 402
 403 # Set the debugging back-end to either avarice, simulavr.
 404 DEBUG_BACKEND = avarice
 405 #DEBUG_BACKEND = simulavr
 406
 407 # GDB Init Filename.
 408 GDBINIT_FILE = __avr_gdbinit
 409
 410 # When using avarice settings for the JTAG
 411 JTAG_DEV = /dev/com1
 412
 413 # Debugging port used to communicate between GDB / avarice / simulavr.
 414 DEBUG_PORT = 4242
 415
 416 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 417 #     just set to localhost unless doing some sort of crazy debugging when
 418 #     avarice is running on a different computer.
 419 DEBUG_HOST = localhost
 420
 421
 422
 423 #============================================================================
 424
 425
 426 # Define programs and commands.
 427 SHELL = sh
 428 CC = avr-gcc
 429 OBJCOPY = avr-objcopy
 430 OBJDUMP = avr-objdump
 431 SIZE = avr-size
 432 AR = avr-ar rcs
 433 NM = avr-nm
 434 AVRDUDE = avrdude
 435 REMOVE = rm -f
 436 REMOVEDIR = rm -rf
 437 COPY = cp
 438 WINSHELL = cmd
 439
 440
 441 # Define Messages
 442 # English
 443 MSG_ERRORS_NONE = Errors: none
 444 MSG_BEGIN = -------- begin --------
 445 MSG_END = --------  end  --------
 446 MSG_SIZE_BEFORE = Size before:
 447 MSG_SIZE_AFTER = Size after:
 448 MSG_COFF = Converting to AVR COFF:
 449 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 450 MSG_FLASH = Creating load file for Flash:
 451 MSG_EEPROM = Creating load file for EEPROM:
 452 MSG_EXTENDED_LISTING = Creating Extended Listing:
 453 MSG_SYMBOL_TABLE = Creating Symbol Table:
 454 MSG_LINKING = Linking:
 455 MSG_COMPILING = Compiling C:
 456 MSG_COMPILING_CPP = Compiling C++:
 457 MSG_ASSEMBLING = Assembling:
 458 MSG_CLEANING = Cleaning project:
 459 MSG_CREATING_LIBRARY = Creating library:
 460
 461
 462
 463
 464 # Define all object files.
 465 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 466
 467 # Define all listing files.
 468 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 469
 470
 471 # Compiler flags to generate dependency files.
 472 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 473
 474
 475 # Combine all necessary flags and optional flags.
 476 # Add target processor to flags.
 477 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 478 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 479 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 480
 481
 482
 483
 484
 485 # Default target.
 486 all: begin gccversion sizebefore build sizeafter end
 487
 488 # Change the build target to build a HEX file or a library.
 489 build: elf hex eep lss sym
 490 #build: lib
 491
 492
 493 elf: $(TARGET).elf
 494 hex: $(TARGET).hex
 495 eep: $(TARGET).eep
 496 lss: $(TARGET).lss
 497 sym: $(TARGET).sym
 498 LIBNAME=lib$(TARGET).a
 499 lib: $(LIBNAME)
 500
 501
 502
 503 # Eye candy.
 504 # AVR Studio 3.x does not check make's exit code but relies on
 505 # the following magic strings to be generated by the compile job.
 506 begin:
 507         @echo
 508         @echo $(MSG_BEGIN)
 509
 510 end:
 511         @echo $(MSG_END)
 512         @echo
 513
 514
 515 # Display size of file.
 516 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 517 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 518 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 519 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 520
 521
 522 sizebefore:
 523         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 524         2>/dev/null; echo; fi
 525
 526 sizeafter:
 527         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 528         2>/dev/null; echo; fi
 529
 530
 531
 532 # Display compiler version information.
 533 gccversion :
 534         @$(CC) --version
 535
 536
 537 # Program the device.
 538 program: $(TARGET).hex $(TARGET).eep
 539         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 540
 541
 542 # Generate avr-gdb config/init file which does the following:
 543 #     define the reset signal, load the target file, connect to target, and set
 544 #     a breakpoint at main().
 545 gdb-config:
 546         @$(REMOVE) $(GDBINIT_FILE)
 547         @echo define reset >> $(GDBINIT_FILE)
 548         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 549         @echo end >> $(GDBINIT_FILE)
 550         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 551         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 552 ifeq ($(DEBUG_BACKEND),simulavr)
 553         @echo load  >> $(GDBINIT_FILE)
 554 endif
 555         @echo break main >> $(GDBINIT_FILE)
 556
 557 debug: gdb-config $(TARGET).elf
 558 ifeq ($(DEBUG_BACKEND), avarice)
 559         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 560         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 561         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 562         @$(WINSHELL) /c pause
 563
 564 else
 565         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 566         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 567 endif
 568         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 569
 570
 571
 572
 573 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 574 COFFCONVERT = $(OBJCOPY) --debugging
 575 COFFCONVERT += --change-section-address .data-0x800000
 576 COFFCONVERT += --change-section-address .bss-0x800000
 577 COFFCONVERT += --change-section-address .noinit-0x800000
 578 COFFCONVERT += --change-section-address .eeprom-0x810000
 579
 580
 581
 582 coff: $(TARGET).elf
 583         @echo
 584         @echo $(MSG_COFF) $(TARGET).cof
 585         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 586
 587
 588 extcoff: $(TARGET).elf
 589         @echo
 590         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 591         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 592
 593
 594
 595 # Create final output files (.hex, .eep) from ELF output file.
 596 %.hex: %.elf
 597         @echo
 598         @echo $(MSG_FLASH) $@
 599         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 600
 601 %.eep: %.elf
 602         @echo
 603         @echo $(MSG_EEPROM) $@
 604         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 605         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 606
 607 # Create extended listing file from ELF output file.
 608 %.lss: %.elf
 609         @echo
 610         @echo $(MSG_EXTENDED_LISTING) $@
 611         $(OBJDUMP) -h -S -z $< > $@
 612
 613 # Create a symbol table from ELF output file.
 614 %.sym: %.elf
 615         @echo
 616         @echo $(MSG_SYMBOL_TABLE) $@
 617         $(NM) -n $< > $@
 618
 619
 620
 621 # Create library from object files.
 622 .SECONDARY : $(TARGET).a
 623 .PRECIOUS : $(OBJ)
 624 %.a: $(OBJ)
 625         @echo
 626         @echo $(MSG_CREATING_LIBRARY) $@
 627         $(AR) $@ $(OBJ)
 628
 629
 630 # Link: create ELF output file from object files.
 631 .SECONDARY : $(TARGET).elf
 632 .PRECIOUS : $(OBJ)
 633 %.elf: $(OBJ)
 634         @echo
 635         @echo $(MSG_LINKING) $@
 636         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 637
 638
 639 # Compile: create object files from C source files.
 640 $(OBJDIR)/%.o : %.c
 641         @echo
 642         @echo $(MSG_COMPILING) $<
 643         $(CC) -c $(ALL_CFLAGS) $< -o $@
 644
 645
 646 # Compile: create object files from C++ source files.
 647 $(OBJDIR)/%.o : %.cpp
 648         @echo
 649         @echo $(MSG_COMPILING_CPP) $<
 650         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 651
 652
 653 # Compile: create assembler files from C source files.
 654 %.s : %.c
 655         $(CC) -S $(ALL_CFLAGS) $< -o $@
 656
 657
 658 # Compile: create assembler files from C++ source files.
 659 %.s : %.cpp
 660         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 661
 662
 663 # Assemble: create object files from assembler source files.
 664 $(OBJDIR)/%.o : %.S
 665         @echo
 666         @echo $(MSG_ASSEMBLING) $<
 667         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 668
 669
 670 # Create preprocessed source for use in sending a bug report.
 671 %.i : %.c
 672         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 673
 674
 675 # Target: clean project.
 676 clean: begin clean_list end
 677
 678 clean_list :
 679         @echo
 680         @echo $(MSG_CLEANING)
 681         $(REMOVE) $(TARGET).hex
 682         $(REMOVE) $(TARGET).eep
 683         $(REMOVE) $(TARGET).cof
 684         $(REMOVE) $(TARGET).elf
 685         $(REMOVE) $(TARGET).map
 686         $(REMOVE) $(TARGET).sym
 687         $(REMOVE) $(TARGET).lss
 688         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 689         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 690         $(REMOVE) $(SRC:.c=.s)
 691         $(REMOVE) $(SRC:.c=.d)
 692         $(REMOVE) $(SRC:.c=.i)
 693         $(REMOVEDIR) .dep
 694
 695 doxygen:
 696         @echo Generating Project Documentation \($(TARGET)\)...
 697         @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
 698           exit 1; \
 699         fi;
 700         @echo Documentation Generation Complete.
 701
 702 clean_doxygen:
 703         rm -rf Documentation
 704
 705 checksource:
 706         @for f in $(SRC) $(CPPSRC) $(ASRC); do \
 707                 if [ -f $$f ]; then \
 708                         echo "Found Source File: $$f" ; \
 709                 else \
 710                         echo "Source File Not Found: $$f" ; \
 711                 fi; done
 712
 713
 714 # Create object files directory
 715 $(shell mkdir $(OBJDIR) 2>/dev/null)
 716
 717
 718 # Include the dependency files.
 719 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 720
 721
 722 # Listing of phony targets.
 723 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 724 build elf hex eep lss sym coff extcoff doxygen clean          \
 725 clean_list clean_doxygen program debug gdb-config checksource
 726