Add missing clean_doxygen phony targets to the project makefiles.
[pub/USBasp.git] / Projects / XPLAINBridge / makefile
1 # Hey Emacs, this is a -*- makefile -*-
2 #----------------------------------------------------------------------------
3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
4 # >> Modified for use with the LUFA project. <<
5 #
6 # Released to the Public Domain
7 #
8 # Additional material for this makefile was written by:
9 # Peter Fleury
10 # Tim Henigan
11 # Colin O'Flynn
12 # Reiner Patommel
13 # Markus Pfaff
14 # Sander Pool
15 # Frederik Rouleau
16 # Carlos Lamas
17 # Dean Camera
18 # Opendous Inc.
19 # Denver Gingerich
20 #
21 #----------------------------------------------------------------------------
22 # On command line:
23 #
24 # make all = Make software.
25 #
26 # make clean = Clean out built project files.
27 #
28 # make coff = Convert ELF to AVR COFF.
29 #
30 # make extcoff = Convert ELF to AVR Extended COFF.
31 #
32 # make program = Download the hex file to the device, using avrdude.
33 # Please customize the avrdude settings below first!
34 #
35 # make dfu = Download the hex file to the device, using dfu-programmer (must
36 # have dfu-programmer installed).
37 #
38 # make flip = Download the hex file to the device, using Atmel FLIP (must
39 # have Atmel FLIP installed).
40 #
41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
42 # (must have dfu-programmer installed).
43 #
44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
45 # (must have Atmel FLIP installed).
46 #
47 # make doxygen = Generate DoxyGen documentation for the project (must have
48 # DoxyGen installed)
49 #
50 # make debug = Start either simulavr or avarice as specified for debugging,
51 # with avr-gdb or avr-insight as the front end for debugging.
52 #
53 # make filename.s = Just compile filename.c into the assembler code only.
54 #
55 # make filename.i = Create a preprocessed source file for use in submitting
56 # bug reports to the GCC project.
57 #
58 # To rebuild project do "make clean" then "make all".
59 #----------------------------------------------------------------------------
60
61
62 # MCU name
63 MCU = at90usb1287
64
65
66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
68 # "Board" inside the application directory.
69 BOARD = XPLAIN
70
71
72 # Processor frequency.
73 # This will define a symbol, F_CPU, in all source code files equal to the
74 # processor frequency in Hz. You can then use this symbol in your source code to
75 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
76 # automatically to create a 32-bit value in your source code.
77 #
78 # This will be an integer division of F_CLOCK below, as it is sourced by
79 # F_CLOCK after it has run through any CPU prescalers. Note that this value
80 # does not *change* the processor frequency - it should merely be updated to
81 # reflect the processor speed set externally so that the code can use accurate
82 # software delays.
83 F_CPU = 8000000
84
85
86 # Input clock frequency.
87 # This will define a symbol, F_CLOCK, in all source code files equal to the
88 # input clock frequency (before any prescaling is performed) in Hz. This value may
89 # differ from F_CPU if prescaling is used on the latter, and is required as the
90 # raw input clock is fed directly to the PLL sections of the AVR for high speed
91 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
92 # at the end, this will be done automatically to create a 32-bit value in your
93 # source code.
94 #
95 # If no clock division is performed on the input clock inside the AVR (via the
96 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
97 F_CLOCK = $(F_CPU)
98
99
100 # Output format. (can be srec, ihex, binary)
101 FORMAT = ihex
102
103
104 # Target file name (without extension).
105 TARGET = XPLAINBridge
106
107
108 # Object files directory
109 # To put object files in current directory, use a dot (.), do NOT make
110 # this an empty or blank macro!
111 OBJDIR = .
112
113
114 # Path to the LUFA library
115 LUFA_PATH = ../../
116
117 # Path to the LUFA AVRISP-MKII project
118 AVRISP_PATH = ../AVRISP-MKII/
119
120 # LUFA library compile-time options
121 LUFA_OPTS = -D USB_DEVICE_ONLY
122 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
123 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
124 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
125 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
126
127
128 # List C source files here. (C dependencies are automatically generated.)
129 SRC = $(TARGET).c \
130 AVRISPDescriptors.c \
131 USARTDescriptors.c \
132 Lib/SoftUART.c \
133 $(AVRISP_PATH)/Lib/V2Protocol.c \
134 $(AVRISP_PATH)/Lib/V2ProtocolParams.c \
135 $(AVRISP_PATH)/Lib/ISP/ISPProtocol.c \
136 $(AVRISP_PATH)/Lib/ISP/ISPTarget.c \
137 $(AVRISP_PATH)/Lib/XPROG/XPROGProtocol.c \
138 $(AVRISP_PATH)/Lib/XPROG/XPROGTarget.c \
139 $(AVRISP_PATH)/Lib/XPROG/XMEGANVM.c \
140 $(AVRISP_PATH)/Lib/XPROG/TINYNVM.c \
141 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
142 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c \
143 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
144 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
145 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
146 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
147 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
148 $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c \
149 $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
150 $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
151 $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
152 $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/CDC.c \
153 $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/CDC.c \
154
155
156 # List C++ source files here. (C dependencies are automatically generated.)
157 CPPSRC =
158
159
160 # List Assembler source files here.
161 # Make them always end in a capital .S. Files ending in a lowercase .s
162 # will not be considered source files but generated files (assembler
163 # output from the compiler), and will be deleted upon "make clean"!
164 # Even though the DOS/Win* filesystem matches both .s and .S the same,
165 # it will preserve the spelling of the filenames, and gcc itself does
166 # care about how the name is spelled on its command-line.
167 ASRC =
168
169
170 # Optimization level, can be [0, 1, 2, 3, s].
171 # 0 = turn off optimization. s = optimize for size.
172 # (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
173 OPT = s
174
175
176 # Debugging format.
177 # Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
178 # AVR Studio 4.10 requires dwarf-2.
179 # AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
180 DEBUG = dwarf-2
181
182
183 # List any extra directories to look for include files here.
184 # Each directory must be seperated by a space.
185 # Use forward slashes for directory separators.
186 # For a directory that has spaces, enclose it in quotes.
187 EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/
188
189
190 # Compiler flag to set the C Standard level.
191 # c89 = "ANSI" C
192 # gnu89 = c89 plus GCC extensions
193 # c99 = ISO C99 standard (not yet fully implemented)
194 # gnu99 = c99 plus GCC extensions
195 CSTANDARD = -std=gnu99
196
197
198 # Place -D or -U options here for C sources
199 CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
200 CDEFS += -DAUX_LINE_PORT=PORTB
201 CDEFS += -DAUX_LINE_PIN=PINB
202 CDEFS += -DAUX_LINE_DDR=DDRB
203 CDEFS += -DAUX_LINE_MASK="(1 << 4)"
204 CDEFS += -DVTARGET_ADC_CHANNEL=2
205 CDEFS += -DVTARGET_REF_VOLTS=3.3
206 CDEFS += -DVTARGET_SCALE_FACTOR=2
207 #CDEFS += -DLIBUSB_DRIVER_COMPAT
208
209
210 # Place -D or -U options here for ASM sources
211 ADEFS = -DF_CPU=$(F_CPU)
212
213
214 # Place -D or -U options here for C++ sources
215 CPPDEFS = -DF_CPU=$(F_CPU)UL
216 #CPPDEFS += -D__STDC_LIMIT_MACROS
217 #CPPDEFS += -D__STDC_CONSTANT_MACROS
218
219
220
221 #---------------- Compiler Options C ----------------
222 # -g*: generate debugging information
223 # -O*: optimization level
224 # -f...: tuning, see GCC manual and avr-libc documentation
225 # -Wall...: warning level
226 # -Wa,...: tell GCC to pass this to the assembler.
227 # -adhlns...: create assembler listing
228 CFLAGS = -g$(DEBUG)
229 CFLAGS += $(CDEFS)
230 CFLAGS += -O$(OPT)
231 CFLAGS += -funsigned-char
232 CFLAGS += -funsigned-bitfields
233 CFLAGS += -ffunction-sections
234 CFLAGS += -fno-inline-small-functions
235 CFLAGS += -fpack-struct
236 CFLAGS += -fshort-enums
237 CFLAGS += -Wall
238 CFLAGS += -Wstrict-prototypes
239 CFLAGS += -Wundef
240 #CFLAGS += -fno-unit-at-a-time
241 #CFLAGS += -Wunreachable-code
242 #CFLAGS += -Wsign-compare
243 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
244 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
245 CFLAGS += $(CSTANDARD)
246
247
248 #---------------- Compiler Options C++ ----------------
249 # -g*: generate debugging information
250 # -O*: optimization level
251 # -f...: tuning, see GCC manual and avr-libc documentation
252 # -Wall...: warning level
253 # -Wa,...: tell GCC to pass this to the assembler.
254 # -adhlns...: create assembler listing
255 CPPFLAGS = -g$(DEBUG)
256 CPPFLAGS += $(CPPDEFS)
257 CPPFLAGS += -O$(OPT)
258 CPPFLAGS += -funsigned-char
259 CPPFLAGS += -funsigned-bitfields
260 CPPFLAGS += -fpack-struct
261 CPPFLAGS += -fshort-enums
262 CPPFLAGS += -fno-exceptions
263 CPPFLAGS += -Wall
264 CFLAGS += -Wundef
265 #CPPFLAGS += -mshort-calls
266 #CPPFLAGS += -fno-unit-at-a-time
267 #CPPFLAGS += -Wstrict-prototypes
268 #CPPFLAGS += -Wunreachable-code
269 #CPPFLAGS += -Wsign-compare
270 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
271 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
272 #CPPFLAGS += $(CSTANDARD)
273
274
275 #---------------- Assembler Options ----------------
276 # -Wa,...: tell GCC to pass this to the assembler.
277 # -adhlns: create listing
278 # -gstabs: have the assembler create line number information; note that
279 # for use in COFF files, additional information about filenames
280 # and function names needs to be present in the assembler source
281 # files -- see avr-libc docs [FIXME: not yet described there]
282 # -listing-cont-lines: Sets the maximum number of continuation lines of hex
283 # dump that will be displayed for a given single line of source input.
284 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
285
286
287 #---------------- Library Options ----------------
288 # Minimalistic printf version
289 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
290
291 # Floating point printf version (requires MATH_LIB = -lm below)
292 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
293
294 # If this is left blank, then it will use the Standard printf version.
295 PRINTF_LIB =
296 #PRINTF_LIB = $(PRINTF_LIB_MIN)
297 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
298
299
300 # Minimalistic scanf version
301 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
302
303 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
304 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
305
306 # If this is left blank, then it will use the Standard scanf version.
307 SCANF_LIB =
308 #SCANF_LIB = $(SCANF_LIB_MIN)
309 #SCANF_LIB = $(SCANF_LIB_FLOAT)
310
311
312 MATH_LIB = -lm
313
314
315 # List any extra directories to look for libraries here.
316 # Each directory must be seperated by a space.
317 # Use forward slashes for directory separators.
318 # For a directory that has spaces, enclose it in quotes.
319 EXTRALIBDIRS =
320
321
322
323 #---------------- External Memory Options ----------------
324
325 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
326 # used for variables (.data/.bss) and heap (malloc()).
327 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
328
329 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
330 # only used for heap (malloc()).
331 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
332
333 EXTMEMOPTS =
334
335
336
337 #---------------- Linker Options ----------------
338 # -Wl,...: tell GCC to pass this to linker.
339 # -Map: create map file
340 # --cref: add cross reference to map file
341 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
342 LDFLAGS += -Wl,--relax
343 LDFLAGS += -Wl,--gc-sections
344 LDFLAGS += $(EXTMEMOPTS)
345 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
346 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
347 #LDFLAGS += -T linker_script.x
348
349
350
351 #---------------- Programming Options (avrdude) ----------------
352
353 # Programming hardware: alf avr910 avrisp bascom bsd
354 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
355 #
356 # Type: avrdude -c ?
357 # to get a full listing.
358 #
359 AVRDUDE_PROGRAMMER = jtagmkII
360
361 # com1 = serial port. Use lpt1 to connect to parallel port.
362 AVRDUDE_PORT = usb
363
364 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
365 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
366
367
368 # Uncomment the following if you want avrdude's erase cycle counter.
369 # Note that this counter needs to be initialized first using -Yn,
370 # see avrdude manual.
371 #AVRDUDE_ERASE_COUNTER = -y
372
373 # Uncomment the following if you do /not/ wish a verification to be
374 # performed after programming the device.
375 #AVRDUDE_NO_VERIFY = -V
376
377 # Increase verbosity level. Please use this when submitting bug
378 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
379 # to submit bug reports.
380 #AVRDUDE_VERBOSE = -v -v
381
382 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
383 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
384 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
385 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
386
387
388
389 #---------------- Debugging Options ----------------
390
391 # For simulavr only - target MCU frequency.
392 DEBUG_MFREQ = $(F_CPU)
393
394 # Set the DEBUG_UI to either gdb or insight.
395 # DEBUG_UI = gdb
396 DEBUG_UI = insight
397
398 # Set the debugging back-end to either avarice, simulavr.
399 DEBUG_BACKEND = avarice
400 #DEBUG_BACKEND = simulavr
401
402 # GDB Init Filename.
403 GDBINIT_FILE = __avr_gdbinit
404
405 # When using avarice settings for the JTAG
406 JTAG_DEV = /dev/com1
407
408 # Debugging port used to communicate between GDB / avarice / simulavr.
409 DEBUG_PORT = 4242
410
411 # Debugging host used to communicate between GDB / avarice / simulavr, normally
412 # just set to localhost unless doing some sort of crazy debugging when
413 # avarice is running on a different computer.
414 DEBUG_HOST = localhost
415
416
417
418 #============================================================================
419
420
421 # Define programs and commands.
422 SHELL = sh
423 CC = avr-gcc
424 OBJCOPY = avr-objcopy
425 OBJDUMP = avr-objdump
426 SIZE = avr-size
427 AR = avr-ar rcs
428 NM = avr-nm
429 AVRDUDE = avrdude
430 REMOVE = rm -f
431 REMOVEDIR = rm -rf
432 COPY = cp
433 WINSHELL = cmd
434
435 # Define Messages
436 # English
437 MSG_ERRORS_NONE = Errors: none
438 MSG_BEGIN = -------- begin --------
439 MSG_END = -------- end --------
440 MSG_SIZE_BEFORE = Size before:
441 MSG_SIZE_AFTER = Size after:
442 MSG_COFF = Converting to AVR COFF:
443 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
444 MSG_FLASH = Creating load file for Flash:
445 MSG_EEPROM = Creating load file for EEPROM:
446 MSG_EXTENDED_LISTING = Creating Extended Listing:
447 MSG_SYMBOL_TABLE = Creating Symbol Table:
448 MSG_LINKING = Linking:
449 MSG_COMPILING = Compiling C:
450 MSG_COMPILING_CPP = Compiling C++:
451 MSG_ASSEMBLING = Assembling:
452 MSG_CLEANING = Cleaning project:
453 MSG_CREATING_LIBRARY = Creating library:
454
455
456
457
458 # Define all object files.
459 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
460
461 # Define all listing files.
462 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
463
464
465 # Compiler flags to generate dependency files.
466 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
467
468
469 # Combine all necessary flags and optional flags.
470 # Add target processor to flags.
471 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
472 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
473 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
474
475
476
477
478
479 # Default target.
480 all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
481
482 # Change the build target to build a HEX file or a library.
483 build: elf hex eep lss sym
484 #build: lib
485
486
487 elf: $(TARGET).elf
488 hex: $(TARGET).hex
489 eep: $(TARGET).eep
490 lss: $(TARGET).lss
491 sym: $(TARGET).sym
492 LIBNAME=lib$(TARGET).a
493 lib: $(LIBNAME)
494
495
496
497 # Eye candy.
498 # AVR Studio 3.x does not check make's exit code but relies on
499 # the following magic strings to be generated by the compile job.
500 begin:
501 @echo
502 @echo $(MSG_BEGIN)
503
504 end:
505 @echo $(MSG_END)
506 @echo
507
508
509 # Display size of file.
510 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
511 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
512 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
513 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
514
515 sizebefore:
516 @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
517 2>/dev/null; echo; fi
518
519 sizeafter:
520 @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
521 2>/dev/null; echo; fi
522
523 $(LUFA_PATH)/LUFA/LUFA_Events.lst:
524 @$(MAKE) -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
525
526 checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
527 @echo
528 @echo Checking for invalid events...
529 @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
530 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
531 @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
532 @if test -s InvalidEvents.tmp; then exit 1; fi
533
534 showliboptions:
535 @echo
536 @echo ---- Compile Time Library Options ----
537 @for i in $(LUFA_OPTS:-D%=%); do \
538 echo $$i; \
539 done
540 @echo --------------------------------------
541
542 showtarget:
543 @echo
544 @echo --------- Target Information ---------
545 @echo AVR Model: $(MCU)
546 @echo Board: $(BOARD)
547 @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
548 @echo --------------------------------------
549
550
551 # Display compiler version information.
552 gccversion :
553 @$(CC) --version
554
555
556 # Program the device.
557 program: $(TARGET).hex $(TARGET).eep
558 $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
559
560 flip: $(TARGET).hex
561 batchisp -hardware usb -device $(MCU) -operation erase f
562 batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
563 batchisp -hardware usb -device $(MCU) -operation start reset 0
564
565 dfu: $(TARGET).hex
566 dfu-programmer $(MCU) erase
567 dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
568 dfu-programmer $(MCU) reset
569
570 flip-ee: $(TARGET).hex $(TARGET).eep
571 $(COPY) $(TARGET).eep $(TARGET)eep.hex
572 batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
573 batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
574 batchisp -hardware usb -device $(MCU) -operation start reset 0
575 $(REMOVE) $(TARGET)eep.hex
576
577 dfu-ee: $(TARGET).hex $(TARGET).eep
578 dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
579 dfu-programmer $(MCU) reset
580
581
582 # Generate avr-gdb config/init file which does the following:
583 # define the reset signal, load the target file, connect to target, and set
584 # a breakpoint at main().
585 gdb-config:
586 @$(REMOVE) $(GDBINIT_FILE)
587 @echo define reset >> $(GDBINIT_FILE)
588 @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
589 @echo end >> $(GDBINIT_FILE)
590 @echo file $(TARGET).elf >> $(GDBINIT_FILE)
591 @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
592 ifeq ($(DEBUG_BACKEND),simulavr)
593 @echo load >> $(GDBINIT_FILE)
594 endif
595 @echo break main >> $(GDBINIT_FILE)
596
597 debug: gdb-config $(TARGET).elf
598 ifeq ($(DEBUG_BACKEND), avarice)
599 @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
600 @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
601 $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
602 @$(WINSHELL) /c pause
603
604 else
605 @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
606 $(DEBUG_MFREQ) --port $(DEBUG_PORT)
607 endif
608 @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
609
610
611
612
613 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
614 COFFCONVERT = $(OBJCOPY) --debugging
615 COFFCONVERT += --change-section-address .data-0x800000
616 COFFCONVERT += --change-section-address .bss-0x800000
617 COFFCONVERT += --change-section-address .noinit-0x800000
618 COFFCONVERT += --change-section-address .eeprom-0x810000
619
620
621
622 coff: $(TARGET).elf
623 @echo
624 @echo $(MSG_COFF) $(TARGET).cof
625 $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
626
627
628 extcoff: $(TARGET).elf
629 @echo
630 @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
631 $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
632
633
634
635 # Create final output files (.hex, .eep) from ELF output file.
636 %.hex: %.elf
637 @echo
638 @echo $(MSG_FLASH) $@
639 $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
640
641 %.eep: %.elf
642 @echo
643 @echo $(MSG_EEPROM) $@
644 -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
645 --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
646
647 # Create extended listing file from ELF output file.
648 %.lss: %.elf
649 @echo
650 @echo $(MSG_EXTENDED_LISTING) $@
651 $(OBJDUMP) -h -z -S $< > $@
652
653 # Create a symbol table from ELF output file.
654 %.sym: %.elf
655 @echo
656 @echo $(MSG_SYMBOL_TABLE) $@
657 $(NM) -n $< > $@
658
659
660
661 # Create library from object files.
662 .SECONDARY : $(TARGET).a
663 .PRECIOUS : $(OBJ)
664 %.a: $(OBJ)
665 @echo
666 @echo $(MSG_CREATING_LIBRARY) $@
667 $(AR) $@ $(OBJ)
668
669
670 # Link: create ELF output file from object files.
671 .SECONDARY : $(TARGET).elf
672 .PRECIOUS : $(OBJ)
673 %.elf: $(OBJ)
674 @echo
675 @echo $(MSG_LINKING) $@
676 $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
677
678
679 # Compile: create object files from C source files.
680 $(OBJDIR)/%.o : %.c
681 @echo
682 @echo $(MSG_COMPILING) $<
683 $(CC) -c $(ALL_CFLAGS) $< -o $@
684
685
686 # Compile: create object files from C++ source files.
687 $(OBJDIR)/%.o : %.cpp
688 @echo
689 @echo $(MSG_COMPILING_CPP) $<
690 $(CC) -c $(ALL_CPPFLAGS) $< -o $@
691
692
693 # Compile: create assembler files from C source files.
694 %.s : %.c
695 $(CC) -S $(ALL_CFLAGS) $< -o $@
696
697
698 # Compile: create assembler files from C++ source files.
699 %.s : %.cpp
700 $(CC) -S $(ALL_CPPFLAGS) $< -o $@
701
702
703 # Assemble: create object files from assembler source files.
704 $(OBJDIR)/%.o : %.S
705 @echo
706 @echo $(MSG_ASSEMBLING) $<
707 $(CC) -c $(ALL_ASFLAGS) $< -o $@
708
709
710 # Create preprocessed source for use in sending a bug report.
711 %.i : %.c
712 $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
713
714
715 # Target: clean project.
716 clean: begin clean_list clean_binary end
717
718 clean_binary:
719 $(REMOVE) $(TARGET).hex
720
721 clean_list:
722 @echo $(MSG_CLEANING)
723 $(REMOVE) $(TARGET).eep
724 $(REMOVE) $(TARGET)eep.hex
725 $(REMOVE) $(TARGET).cof
726 $(REMOVE) $(TARGET).elf
727 $(REMOVE) $(TARGET).map
728 $(REMOVE) $(TARGET).sym
729 $(REMOVE) $(TARGET).lss
730 $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
731 $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
732 $(REMOVE) $(SRC:.c=.s)
733 $(REMOVE) $(SRC:.c=.d)
734 $(REMOVE) $(SRC:.c=.i)
735 $(REMOVE) InvalidEvents.tmp
736 $(REMOVEDIR) .dep
737
738 doxygen:
739 @echo Generating Project Documentation...
740 @doxygen Doxygen.conf
741 @echo Documentation Generation Complete.
742
743 clean_doxygen:
744 rm -rf Documentation
745
746 # Create object files directory
747 $(shell mkdir $(OBJDIR) 2>/dev/null)
748
749
750 # Include the dependency files.
751 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
752
753
754 # Listing of phony targets.
755 .PHONY : all checkinvalidevents showliboptions \
756 showtarget begin finish end sizebefore sizeafter \
757 gccversion build elf hex eep lss sym coff extcoff \
758 program dfu flip flip-ee dfu-ee clean debug \
759 clean_list clean_binary clean_doxygen gdb-config \
760 doxygen