BuildTests/ModuleTest/makefile.avr8

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target architecture (see library "Board Types" documentation).
  67 ARCH = AVR8
  68
  69
  70 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  71 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  72 # "Board" inside the application directory.
  73 BOARD = NONE
  74
  75
  76 # Processor frequency.
  77 #     This will define a symbol, F_CPU, in all source code files equal to the
  78 #     processor frequency in Hz. You can then use this symbol in your source code to
  79 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  80 #     automatically to create a 32-bit value in your source code.
  81 #
  82 #     This will be an integer division of F_USB below, as it is sourced by
  83 #     F_USB after it has run through any CPU prescalers. Note that this value
  84 #     does not *change* the processor frequency - it should merely be updated to
  85 #     reflect the processor speed set externally so that the code can use accurate
  86 #     software delays.
  87 F_CPU = 16000000
  88
  89
  90 # Input clock frequency.
  91 #     This will define a symbol, F_USB, in all source code files equal to the
  92 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  93 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  94 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  95 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  96 #     at the end, this will be done automatically to create a 32-bit value in your
  97 #     source code.
  98 #
  99 #     If no clock division is performed on the input clock inside the AVR (via the
 100 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 101 F_USB = $(F_CPU)
 102
 103
 104 # Output format. (can be srec, ihex, binary)
 105 FORMAT = ihex
 106
 107
 108 # Target file name (without extension).
 109 TARGET = Test
 110
 111
 112 # Object files directory
 113 #     To put object files in current directory, use a dot (.), do NOT make
 114 #     this an empty or blank macro!
 115 OBJDIR = .
 116
 117
 118 # Path to the LUFA library
 119 LUFA_PATH = ../..
 120
 121
 122 # LUFA library compile-time options and predefined tokens
 123 LUFA_OPTS  =
 124
 125
 126 # Create the LUFA source path variables by including the LUFA root makefile
 127 include $(LUFA_PATH)/LUFA/makefile
 128
 129
 130 # List C source files here. (C dependencies are automatically generated.)
 131 SRC = Test_C.c                   \
 132       $(LUFA_SRC_USB)            \
 133       $(LUFA_SRC_USBCLASS)       \
 134       $(LUFA_SRC_SERIAL)         \
 135       $(LUFA_SRC_SCHEDULER)
 136
 137
 138
 139 # List C++ source files here. (C dependencies are automatically generated.)
 140 CPPSRC = Test_CPP.cpp
 141
 142
 143 # List Assembler source files here.
 144 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 145 #     will not be considered source files but generated files (assembler
 146 #     output from the compiler), and will be deleted upon "make clean"!
 147 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 148 #     it will preserve the spelling of the filenames, and gcc itself does
 149 #     care about how the name is spelled on its command-line.
 150 ASRC = Dummy.S
 151
 152
 153 # Optimization level, can be [0, 1, 2, 3, s].
 154 #     0 = turn off optimization. s = optimize for size.
 155 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 156 OPT = s
 157
 158
 159 # Debugging format.
 160 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 161 #     AVR Studio 4.10 requires dwarf-2.
 162 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 163 DEBUG = dwarf-2
 164
 165
 166 # List any extra directories to look for include files here.
 167 #     Each directory must be seperated by a space.
 168 #     Use forward slashes for directory separators.
 169 #     For a directory that has spaces, enclose it in quotes.
 170 EXTRAINCDIRS = $(LUFA_PATH)/
 171
 172
 173 # Compiler flag to set the C Standard level.
 174 #     c89   = "ANSI" C
 175 #     gnu89 = c89 plus GCC extensions
 176 #     c99   = ISO C99 standard (not yet fully implemented)
 177 #     gnu99 = c99 plus GCC extensions
 178 CSTANDARD = -std=c99
 179
 180
 181 # Place -D or -U options here for C sources
 182 CDEFS  = -DF_CPU=$(F_CPU)UL
 183 CDEFS += -DF_USB=$(F_USB)UL
 184 CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
 185 CDEFS += $(LUFA_OPTS)
 186
 187
 188 # Place -D or -U options here for ASM sources
 189 ADEFS  = -DF_CPU=$(F_CPU)
 190 ADEFS += -DF_USB=$(F_USB)UL
 191 ADEFS += -DBOARD=BOARD_$(BOARD)
 192 ADEFS += $(LUFA_OPTS)
 193
 194 # Place -D or -U options here for C++ sources
 195 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 196 CPPDEFS += -DF_USB=$(F_USB)UL
 197 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 198 CPPDEFS += $(LUFA_OPTS)
 199 #CPPDEFS += -D__STDC_LIMIT_MACROS
 200 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 201
 202
 203
 204 #---------------- Compiler Options C ----------------
 205 #  -g*:          generate debugging information
 206 #  -O*:          optimization level
 207 #  -f...:        tuning, see GCC manual and avr-libc documentation
 208 #  -Wall...:     warning level
 209 #  -Wa,...:      tell GCC to pass this to the assembler.
 210 #    -adhlns...: create assembler listing
 211 CFLAGS = -g$(DEBUG)
 212 CFLAGS += $(CDEFS)
 213 CFLAGS += -O$(OPT)
 214 CFLAGS += -funsigned-char
 215 CFLAGS += -funsigned-bitfields
 216 CFLAGS += -ffunction-sections
 217 CFLAGS += -fno-inline-small-functions
 218 CFLAGS += -fpack-struct
 219 CFLAGS += -fshort-enums
 220 CFLAGS += -fno-strict-aliasing
 221 CFLAGS += -fno-split-wide-types
 222 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 223 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 224 CFLAGS += $(CSTANDARD)
 225 CFLAGS += -Werror
 226 CFLAGS += -Wall
 227 CFLAGS += -Wextra
 228 CFLAGS += -Wstrict-prototypes
 229 CFLAGS += -Wformat=2
 230 CFLAGS += -Winit-self
 231 CFLAGS += -Wswitch-enum
 232 CFLAGS += -Wunused
 233 CFLAGS += -Wundef
 234 CFLAGS += -Wpointer-arith
 235 CFLAGS += -Wcast-align
 236 CFLAGS += -Wwrite-strings
 237 CFLAGS += -Wlogical-op
 238 CFLAGS += -Wmissing-parameter-type
 239 CFLAGS += -Wmissing-declarations
 240 CFLAGS += -Wmissing-field-initializers
 241 CFLAGS += -Wmissing-format-attribute
 242 CFLAGS += -Wredundant-decls
 243 CFLAGS += -Wnested-externs
 244 CFLAGS += -Woverlength-strings
 245 #CFLAGS += -Wswitch-default
 246 #CFLAGS += -Wc++-compat
 247 #CFLAGS += -Wcast-qual
 248 #CFLAGS += -Wconversion
 249 #CFLAGS += -Wjump-misses-init
 250 #CFLAGS += -pedantic
 251
 252
 253 #---------------- Compiler Options C++ ----------------
 254 #  -g*:          generate debugging information
 255 #  -O*:          optimization level
 256 #  -f...:        tuning, see GCC manual and avr-libc documentation
 257 #  -Wall...:     warning level
 258 #  -Wa,...:      tell GCC to pass this to the assembler.
 259 #    -adhlns...: create assembler listing
 260 CPPFLAGS = -g$(DEBUG)
 261 CPPFLAGS += $(CPPDEFS)
 262 CPPFLAGS += -O$(OPT)
 263 CPPFLAGS += -funsigned-char
 264 CPPFLAGS += -funsigned-bitfields
 265 CPPFLAGS += -fpack-struct
 266 CPPFLAGS += -fshort-enums
 267 CPPFLAGS += -fno-exceptions
 268 CPPFLAGS += -Wall
 269 CPPFLAGS += -Wundef
 270 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 271 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 272
 273
 274 #---------------- Assembler Options ----------------
 275 #  -Wa,...:   tell GCC to pass this to the assembler.
 276 #  -adhlns:   create listing
 277 #  -gstabs:   have the assembler create line number information; note that
 278 #             for use in COFF files, additional information about filenames
 279 #             and function names needs to be present in the assembler source
 280 #             files -- see avr-libc docs [FIXME: not yet described there]
 281 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 282 #       dump that will be displayed for a given single line of source input.
 283 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 284
 285
 286 #---------------- Library Options ----------------
 287 # Minimalistic printf version
 288 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 289
 290 # Floating point printf version (requires MATH_LIB = -lm below)
 291 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 292
 293 # If this is left blank, then it will use the Standard printf version.
 294 PRINTF_LIB =
 295 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 296 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 297
 298
 299 # Minimalistic scanf version
 300 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 301
 302 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 303 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 304
 305 # If this is left blank, then it will use the Standard scanf version.
 306 SCANF_LIB =
 307 #SCANF_LIB = $(SCANF_LIB_MIN)
 308 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 309
 310
 311 MATH_LIB = -lm
 312
 313
 314 # List any extra directories to look for libraries here.
 315 #     Each directory must be seperated by a space.
 316 #     Use forward slashes for directory separators.
 317 #     For a directory that has spaces, enclose it in quotes.
 318 EXTRALIBDIRS =
 319
 320
 321
 322 #---------------- External Memory Options ----------------
 323
 324 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 325 # used for variables (.data/.bss) and heap (malloc()).
 326 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 327
 328 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 329 # only used for heap (malloc()).
 330 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 331
 332 EXTMEMOPTS =
 333
 334
 335
 336 #---------------- Linker Options ----------------
 337 #  -Wl,...:     tell GCC to pass this to linker.
 338 #    -Map:      create map file
 339 #    --cref:    add cross reference to  map file
 340 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 341 LDFLAGS += -Wl,--relax
 342 LDFLAGS += -Wl,--gc-sections
 343 LDFLAGS += $(EXTMEMOPTS)
 344 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 345 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 346 #LDFLAGS += -T linker_script.x
 347
 348
 349
 350 #---------------- Programming Options (avrdude) ----------------
 351
 352 # Programming hardware
 353 # Type: avrdude -c ?
 354 # to get a full listing.
 355 #
 356 AVRDUDE_PROGRAMMER = jtagmkII
 357
 358 # com1 = serial port. Use lpt1 to connect to parallel port.
 359 AVRDUDE_PORT = usb
 360
 361 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 362 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 363
 364
 365 # Uncomment the following if you want avrdude's erase cycle counter.
 366 # Note that this counter needs to be initialized first using -Yn,
 367 # see avrdude manual.
 368 #AVRDUDE_ERASE_COUNTER = -y
 369
 370 # Uncomment the following if you do /not/ wish a verification to be
 371 # performed after programming the device.
 372 #AVRDUDE_NO_VERIFY = -V
 373
 374 # Increase verbosity level.  Please use this when submitting bug
 375 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 376 # to submit bug reports.
 377 #AVRDUDE_VERBOSE = -v -v
 378
 379 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 380 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 381 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 382 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 383
 384
 385
 386 #---------------- Debugging Options ----------------
 387
 388 # For simulavr only - target MCU frequency.
 389 DEBUG_MFREQ = $(F_CPU)
 390
 391 # Set the DEBUG_UI to either gdb or insight.
 392 # DEBUG_UI = gdb
 393 DEBUG_UI = insight
 394
 395 # Set the debugging back-end to either avarice, simulavr.
 396 DEBUG_BACKEND = avarice
 397 #DEBUG_BACKEND = simulavr
 398
 399 # GDB Init Filename.
 400 GDBINIT_FILE = __avr_gdbinit
 401
 402 # When using avarice settings for the JTAG
 403 JTAG_DEV = /dev/com1
 404
 405 # Debugging port used to communicate between GDB / avarice / simulavr.
 406 DEBUG_PORT = 4242
 407
 408 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 409 #     just set to localhost unless doing some sort of crazy debugging when
 410 #     avarice is running on a different computer.
 411 DEBUG_HOST = localhost
 412
 413
 414
 415 #============================================================================
 416
 417
 418 # Define programs and commands.
 419 SHELL = sh
 420 CC = avr-gcc
 421 OBJCOPY = avr-objcopy
 422 OBJDUMP = avr-objdump
 423 SIZE = avr-size
 424 AR = avr-ar rcs
 425 NM = avr-nm
 426 AVRDUDE = avrdude
 427 REMOVE = rm -f
 428 REMOVEDIR = rm -rf
 429 COPY = cp
 430 WINSHELL = cmd
 431
 432
 433 # Define Messages
 434 # English
 435 MSG_ERRORS_NONE = Errors: none
 436 MSG_BEGIN = -------- begin --------
 437 MSG_END = --------  end  --------
 438 MSG_SIZE_BEFORE = Size before:
 439 MSG_SIZE_AFTER = Size after:
 440 MSG_COFF = Converting to AVR COFF:
 441 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 442 MSG_FLASH = Creating load file for Flash:
 443 MSG_EEPROM = Creating load file for EEPROM:
 444 MSG_EXTENDED_LISTING = Creating Extended Listing:
 445 MSG_SYMBOL_TABLE = Creating Symbol Table:
 446 MSG_LINKING = Linking:
 447 MSG_COMPILING = Compiling C:
 448 MSG_COMPILING_CPP = Compiling C++:
 449 MSG_ASSEMBLING = Assembling:
 450 MSG_CLEANING = Cleaning project:
 451 MSG_CREATING_LIBRARY = Creating library:
 452
 453
 454
 455
 456 # Define all object files.
 457 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 458
 459 # Define all listing files.
 460 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 461
 462
 463 # Compiler flags to generate dependency files.
 464 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 465
 466
 467 # Combine all necessary flags and optional flags.
 468 # Add target processor to flags.
 469 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 470 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 471 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 472
 473
 474
 475
 476
 477 # Default target.
 478 all: begin gccversion sizebefore build sizeafter end
 479
 480 # Change the build target to build a HEX file or a library.
 481 build: elf hex eep lss sym
 482 #build: lib
 483
 484
 485 elf: $(TARGET).elf
 486 hex: $(TARGET).hex
 487 eep: $(TARGET).eep
 488 lss: $(TARGET).lss
 489 sym: $(TARGET).sym
 490 LIBNAME=lib$(TARGET).a
 491 lib: $(LIBNAME)
 492
 493
 494
 495 # Eye candy.
 496 # AVR Studio 3.x does not check make's exit code but relies on
 497 # the following magic strings to be generated by the compile job.
 498 begin:
 499         @echo
 500         @echo $(MSG_BEGIN)
 501
 502 end:
 503         @echo $(MSG_END)
 504         @echo
 505
 506
 507 # Display size of file.
 508 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 509 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 510 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 511 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 512
 513
 514 sizebefore:
 515         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 516         2>/dev/null; echo; fi
 517
 518 sizeafter:
 519         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 520         2>/dev/null; echo; fi
 521
 522
 523
 524 # Display compiler version information.
 525 gccversion :
 526         @$(CC) --version
 527
 528
 529 # Program the device.
 530 program: $(TARGET).hex $(TARGET).eep
 531         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 532
 533 flip: $(TARGET).hex
 534         batchisp -hardware usb -device $(MCU) -operation erase f
 535         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 536         batchisp -hardware usb -device $(MCU) -operation start reset 0
 537
 538 dfu: $(TARGET).hex
 539         dfu-programmer $(MCU) erase
 540         dfu-programmer $(MCU) flash $(TARGET).hex
 541         dfu-programmer $(MCU) reset
 542
 543 flip-ee: $(TARGET).hex $(TARGET).eep
 544         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 545         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 546         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 547         batchisp -hardware usb -device $(MCU) -operation start reset 0
 548         $(REMOVE) $(TARGET)eep.hex
 549
 550 dfu-ee: $(TARGET).hex $(TARGET).eep
 551         dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 552         dfu-programmer $(MCU) reset
 553
 554
 555 # Generate avr-gdb config/init file which does the following:
 556 #     define the reset signal, load the target file, connect to target, and set
 557 #     a breakpoint at main().
 558 gdb-config:
 559         @$(REMOVE) $(GDBINIT_FILE)
 560         @echo define reset >> $(GDBINIT_FILE)
 561         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 562         @echo end >> $(GDBINIT_FILE)
 563         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 564         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 565 ifeq ($(DEBUG_BACKEND),simulavr)
 566         @echo load  >> $(GDBINIT_FILE)
 567 endif
 568         @echo break main >> $(GDBINIT_FILE)
 569
 570 debug: gdb-config $(TARGET).elf
 571 ifeq ($(DEBUG_BACKEND), avarice)
 572         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 573         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 574         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 575         @$(WINSHELL) /c pause
 576
 577 else
 578         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 579         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 580 endif
 581         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 582
 583
 584
 585
 586 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 587 COFFCONVERT = $(OBJCOPY) --debugging
 588 COFFCONVERT += --change-section-address .data-0x800000
 589 COFFCONVERT += --change-section-address .bss-0x800000
 590 COFFCONVERT += --change-section-address .noinit-0x800000
 591 COFFCONVERT += --change-section-address .eeprom-0x810000
 592
 593
 594
 595 coff: $(TARGET).elf
 596         @echo
 597         @echo $(MSG_COFF) $(TARGET).cof
 598         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 599
 600
 601 extcoff: $(TARGET).elf
 602         @echo
 603         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 604         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 605
 606
 607
 608 # Create final output files (.hex, .eep) from ELF output file.
 609 %.hex: %.elf
 610         @echo
 611         @echo $(MSG_FLASH) $@
 612         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 613
 614 %.eep: %.elf
 615         @echo
 616         @echo $(MSG_EEPROM) $@
 617         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 618         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 619
 620 # Create extended listing file from ELF output file.
 621 %.lss: %.elf
 622         @echo
 623         @echo $(MSG_EXTENDED_LISTING) $@
 624         $(OBJDUMP) -h -S -z $< > $@
 625
 626 # Create a symbol table from ELF output file.
 627 %.sym: %.elf
 628         @echo
 629         @echo $(MSG_SYMBOL_TABLE) $@
 630         $(NM) -n $< > $@
 631
 632
 633
 634 # Create library from object files.
 635 .SECONDARY : $(TARGET).a
 636 .PRECIOUS : $(OBJ)
 637 %.a: $(OBJ)
 638         @echo
 639         @echo $(MSG_CREATING_LIBRARY) $@
 640         $(AR) $@ $(OBJ)
 641
 642
 643 # Link: create ELF output file from object files.
 644 .SECONDARY : $(TARGET).elf
 645 .PRECIOUS : $(OBJ)
 646 %.elf: $(OBJ)
 647         @echo
 648         @echo $(MSG_LINKING) $@
 649         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 650
 651
 652 # Compile: create object files from C source files.
 653 $(OBJDIR)/%.o : %.c
 654         @echo
 655         @echo $(MSG_COMPILING) $<
 656         $(CC) -c $(ALL_CFLAGS) $< -o $@
 657
 658
 659 # Compile: create object files from C++ source files.
 660 $(OBJDIR)/%.o : %.cpp
 661         @echo
 662         @echo $(MSG_COMPILING_CPP) $<
 663         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 664
 665
 666 # Compile: create assembler files from C source files.
 667 %.s : %.c
 668         $(CC) -S $(ALL_CFLAGS) $< -o $@
 669
 670
 671 # Compile: create assembler files from C++ source files.
 672 %.s : %.cpp
 673         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 674
 675
 676 # Assemble: create object files from assembler source files.
 677 $(OBJDIR)/%.o : %.S
 678         @echo
 679         @echo $(MSG_ASSEMBLING) $<
 680         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 681
 682
 683 # Create preprocessed source for use in sending a bug report.
 684 %.i : %.c
 685         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 686
 687
 688 # Target: clean project.
 689 clean: begin clean_list end
 690
 691 clean_list :
 692         @echo
 693         @echo $(MSG_CLEANING)
 694         $(REMOVE) $(TARGET).hex
 695         $(REMOVE) $(TARGET).eep
 696         $(REMOVE) $(TARGET).cof
 697         $(REMOVE) $(TARGET).elf
 698         $(REMOVE) $(TARGET).map
 699         $(REMOVE) $(TARGET).sym
 700         $(REMOVE) $(TARGET).lss
 701         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 702         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 703         $(REMOVE) $(SRC:.c=.s)
 704         $(REMOVE) $(SRC:.c=.d)
 705         $(REMOVE) $(SRC:.c=.i)
 706         $(REMOVEDIR) .dep
 707
 708 doxygen:
 709         @echo Generating Project Documentation \($(TARGET)\)...
 710         @doxygen Doxygen.conf
 711         @echo Documentation Generation Complete.
 712
 713 clean_doxygen:
 714         rm -rf Documentation
 715
 716 checksource:
 717         @for f in $(SRC) $(CPPSRC) $(ASRC); do \
 718                 if [ -f $$f ]; then \
 719                         echo "Found Source File: $$f" ; \
 720                 else \
 721                         echo "Source File Not Found: $$f" ; \
 722                 fi; done
 723
 724
 725 # Create object files directory
 726 $(shell mkdir $(OBJDIR) 2>/dev/null)
 727
 728
 729 # Include the dependency files.
 730 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 731
 732
 733 # Listing of phony targets.
 734 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 735 build elf hex eep lss sym coff extcoff doxygen clean          \
 736 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 737 debug gdb-config checksource