Projects/Incomplete/StandaloneProgrammer/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = StandaloneProgrammer
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../../../
 116
 117
 118 # LUFA library compile-time options
 119 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 120 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 121 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 122 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 123 LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
 124
 125
 126 # List C source files here. (C dependencies are automatically generated.)
 127 SRC = $(TARGET).c                                                 \
 128           Descriptors.c                                               \
 129           DiskHost.c                                                  \
 130           DiskDevice.c                                                \
 131           Lib/SCSI.c                                                  \
 132           Lib/DataflashManager.c                                      \
 133           Lib/ProgrammerConfig.c                                      \
 134           Lib/PetiteFATFs/diskio.c                                    \
 135           Lib/PetiteFATFs/pff.c                                       \
 136           $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 137           $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c         \
 138           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 139           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c             \
 140           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 141           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 142           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 143           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 144           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 145           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
 146           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 147           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MassStorage.c    \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/MassStorage.c      \
 151
 152
 153 # List C++ source files here. (C dependencies are automatically generated.)
 154 CPPSRC =
 155
 156
 157 # List Assembler source files here.
 158 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 159 #     will not be considered source files but generated files (assembler
 160 #     output from the compiler), and will be deleted upon "make clean"!
 161 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 162 #     it will preserve the spelling of the filenames, and gcc itself does
 163 #     care about how the name is spelled on its command-line.
 164 ASRC =
 165
 166
 167 # Optimization level, can be [0, 1, 2, 3, s].
 168 #     0 = turn off optimization. s = optimize for size.
 169 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 170 OPT = s
 171
 172
 173 # Debugging format.
 174 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 175 #     AVR Studio 4.10 requires dwarf-2.
 176 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 177 DEBUG = dwarf-2
 178
 179
 180 # List any extra directories to look for include files here.
 181 #     Each directory must be seperated by a space.
 182 #     Use forward slashes for directory separators.
 183 #     For a directory that has spaces, enclose it in quotes.
 184 EXTRAINCDIRS = $(LUFA_PATH)/
 185
 186
 187 # Compiler flag to set the C Standard level.
 188 #     c89   = "ANSI" C
 189 #     gnu89 = c89 plus GCC extensions
 190 #     c99   = ISO C99 standard (not yet fully implemented)
 191 #     gnu99 = c99 plus GCC extensions
 192 CSTANDARD = -std=gnu99
 193
 194
 195 # Place -D or -U options here for C sources
 196 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 197
 198
 199 # Place -D or -U options here for ASM sources
 200 ADEFS = -DF_CPU=$(F_CPU)
 201
 202
 203 # Place -D or -U options here for C++ sources
 204 CPPDEFS = -DF_CPU=$(F_CPU)UL
 205 #CPPDEFS += -D__STDC_LIMIT_MACROS
 206 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 207
 208
 209
 210 #---------------- Compiler Options C ----------------
 211 #  -g*:          generate debugging information
 212 #  -O*:          optimization level
 213 #  -f...:        tuning, see GCC manual and avr-libc documentation
 214 #  -Wall...:     warning level
 215 #  -Wa,...:      tell GCC to pass this to the assembler.
 216 #    -adhlns...: create assembler listing
 217 CFLAGS = -g$(DEBUG)
 218 CFLAGS += $(CDEFS)
 219 CFLAGS += -O$(OPT)
 220 CFLAGS += -funsigned-char
 221 CFLAGS += -funsigned-bitfields
 222 CFLAGS += -ffunction-sections
 223 CFLAGS += -fno-inline-small-functions
 224 CFLAGS += -fpack-struct
 225 CFLAGS += -fshort-enums
 226 CFLAGS += -fno-strict-aliasing
 227 CFLAGS += -Wall
 228 CFLAGS += -Wstrict-prototypes
 229 CFLAGS += -Wundef
 230 #CFLAGS += -fno-unit-at-a-time
 231 #CFLAGS += -Wunreachable-code
 232 #CFLAGS += -Wsign-compare
 233 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 234 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 235 CFLAGS += $(CSTANDARD)
 236
 237
 238 #---------------- Compiler Options C++ ----------------
 239 #  -g*:          generate debugging information
 240 #  -O*:          optimization level
 241 #  -f...:        tuning, see GCC manual and avr-libc documentation
 242 #  -Wall...:     warning level
 243 #  -Wa,...:      tell GCC to pass this to the assembler.
 244 #    -adhlns...: create assembler listing
 245 CPPFLAGS = -g$(DEBUG)
 246 CPPFLAGS += $(CPPDEFS)
 247 CPPFLAGS += -O$(OPT)
 248 CPPFLAGS += -funsigned-char
 249 CPPFLAGS += -funsigned-bitfields
 250 CPPFLAGS += -fpack-struct
 251 CPPFLAGS += -fshort-enums
 252 CPPFLAGS += -fno-exceptions
 253 CPPFLAGS += -Wall
 254 CFLAGS += -Wundef
 255 #CPPFLAGS += -mshort-calls
 256 #CPPFLAGS += -fno-unit-at-a-time
 257 #CPPFLAGS += -Wstrict-prototypes
 258 #CPPFLAGS += -Wunreachable-code
 259 #CPPFLAGS += -Wsign-compare
 260 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 261 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 262 #CPPFLAGS += $(CSTANDARD)
 263
 264
 265 #---------------- Assembler Options ----------------
 266 #  -Wa,...:   tell GCC to pass this to the assembler.
 267 #  -adhlns:   create listing
 268 #  -gstabs:   have the assembler create line number information; note that
 269 #             for use in COFF files, additional information about filenames
 270 #             and function names needs to be present in the assembler source
 271 #             files -- see avr-libc docs [FIXME: not yet described there]
 272 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 273 #       dump that will be displayed for a given single line of source input.
 274 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 275
 276
 277 #---------------- Library Options ----------------
 278 # Minimalistic printf version
 279 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 280
 281 # Floating point printf version (requires MATH_LIB = -lm below)
 282 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 283
 284 # If this is left blank, then it will use the Standard printf version.
 285 PRINTF_LIB =
 286 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 287 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 288
 289
 290 # Minimalistic scanf version
 291 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 292
 293 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 294 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 295
 296 # If this is left blank, then it will use the Standard scanf version.
 297 SCANF_LIB =
 298 #SCANF_LIB = $(SCANF_LIB_MIN)
 299 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 300
 301
 302 MATH_LIB = -lm
 303
 304
 305 # List any extra directories to look for libraries here.
 306 #     Each directory must be seperated by a space.
 307 #     Use forward slashes for directory separators.
 308 #     For a directory that has spaces, enclose it in quotes.
 309 EXTRALIBDIRS =
 310
 311
 312
 313 #---------------- External Memory Options ----------------
 314
 315 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 316 # used for variables (.data/.bss) and heap (malloc()).
 317 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 318
 319 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 320 # only used for heap (malloc()).
 321 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 322
 323 EXTMEMOPTS =
 324
 325
 326
 327 #---------------- Linker Options ----------------
 328 #  -Wl,...:     tell GCC to pass this to linker.
 329 #    -Map:      create map file
 330 #    --cref:    add cross reference to  map file
 331 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 332 LDFLAGS += -Wl,--relax
 333 LDFLAGS += -Wl,--gc-sections
 334 LDFLAGS += $(EXTMEMOPTS)
 335 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 336 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 337 #LDFLAGS += -T linker_script.x
 338
 339
 340
 341 #---------------- Programming Options (avrdude) ----------------
 342
 343 # Programming hardware: alf avr910 avrisp bascom bsd
 344 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 345 #
 346 # Type: avrdude -c ?
 347 # to get a full listing.
 348 #
 349 AVRDUDE_PROGRAMMER = jtagmkII
 350
 351 # com1 = serial port. Use lpt1 to connect to parallel port.
 352 AVRDUDE_PORT = usb
 353
 354 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 355 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 356
 357
 358 # Uncomment the following if you want avrdude's erase cycle counter.
 359 # Note that this counter needs to be initialized first using -Yn,
 360 # see avrdude manual.
 361 #AVRDUDE_ERASE_COUNTER = -y
 362
 363 # Uncomment the following if you do /not/ wish a verification to be
 364 # performed after programming the device.
 365 #AVRDUDE_NO_VERIFY = -V
 366
 367 # Increase verbosity level.  Please use this when submitting bug
 368 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 369 # to submit bug reports.
 370 #AVRDUDE_VERBOSE = -v -v
 371
 372 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 373 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 374 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 375 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 376
 377
 378
 379 #---------------- Debugging Options ----------------
 380
 381 # For simulavr only - target MCU frequency.
 382 DEBUG_MFREQ = $(F_CPU)
 383
 384 # Set the DEBUG_UI to either gdb or insight.
 385 # DEBUG_UI = gdb
 386 DEBUG_UI = insight
 387
 388 # Set the debugging back-end to either avarice, simulavr.
 389 DEBUG_BACKEND = avarice
 390 #DEBUG_BACKEND = simulavr
 391
 392 # GDB Init Filename.
 393 GDBINIT_FILE = __avr_gdbinit
 394
 395 # When using avarice settings for the JTAG
 396 JTAG_DEV = /dev/com1
 397
 398 # Debugging port used to communicate between GDB / avarice / simulavr.
 399 DEBUG_PORT = 4242
 400
 401 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 402 #     just set to localhost unless doing some sort of crazy debugging when
 403 #     avarice is running on a different computer.
 404 DEBUG_HOST = localhost
 405
 406
 407
 408 #============================================================================
 409
 410
 411 # Define programs and commands.
 412 SHELL = sh
 413 CC = avr-gcc
 414 OBJCOPY = avr-objcopy
 415 OBJDUMP = avr-objdump
 416 SIZE = avr-size
 417 AR = avr-ar rcs
 418 NM = avr-nm
 419 AVRDUDE = avrdude
 420 REMOVE = rm -f
 421 REMOVEDIR = rm -rf
 422 COPY = cp
 423 WINSHELL = cmd
 424
 425 # Define Messages
 426 # English
 427 MSG_ERRORS_NONE = Errors: none
 428 MSG_BEGIN = -------- begin --------
 429 MSG_END = --------  end  --------
 430 MSG_SIZE_BEFORE = Size before:
 431 MSG_SIZE_AFTER = Size after:
 432 MSG_COFF = Converting to AVR COFF:
 433 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 434 MSG_FLASH = Creating load file for Flash:
 435 MSG_EEPROM = Creating load file for EEPROM:
 436 MSG_EXTENDED_LISTING = Creating Extended Listing:
 437 MSG_SYMBOL_TABLE = Creating Symbol Table:
 438 MSG_LINKING = Linking:
 439 MSG_COMPILING = Compiling C:
 440 MSG_COMPILING_CPP = Compiling C++:
 441 MSG_ASSEMBLING = Assembling:
 442 MSG_CLEANING = Cleaning project:
 443 MSG_CREATING_LIBRARY = Creating library:
 444
 445
 446
 447
 448 # Define all object files.
 449 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 450
 451 # Define all listing files.
 452 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 453
 454
 455 # Compiler flags to generate dependency files.
 456 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 457
 458
 459 # Combine all necessary flags and optional flags.
 460 # Add target processor to flags.
 461 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 462 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 463 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 464
 465
 466
 467
 468
 469 # Default target.
 470 all: begin gccversion sizebefore build showliboptions showtarget sizeafter end
 471
 472 # Change the build target to build a HEX file or a library.
 473 build: elf hex eep lss sym
 474 #build: lib
 475
 476
 477 elf: $(TARGET).elf
 478 hex: $(TARGET).hex
 479 eep: $(TARGET).eep
 480 lss: $(TARGET).lss
 481 sym: $(TARGET).sym
 482 LIBNAME=lib$(TARGET).a
 483 lib: $(LIBNAME)
 484
 485
 486
 487 # Eye candy.
 488 # AVR Studio 3.x does not check make's exit code but relies on
 489 # the following magic strings to be generated by the compile job.
 490 begin:
 491         @echo
 492         @echo $(MSG_BEGIN)
 493
 494 end:
 495         @echo $(MSG_END)
 496         @echo
 497
 498
 499 # Display size of file.
 500 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 501 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 502 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 503 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 504
 505 sizebefore:
 506         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 507         2>/dev/null; echo; fi
 508
 509 sizeafter:
 510         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 511         2>/dev/null; echo; fi
 512
 513 showliboptions:
 514         @echo
 515         @echo ---- Compile Time Library Options ----
 516         @for i in $(LUFA_OPTS:-D%=%); do \
 517                 echo $$i; \
 518         done
 519         @echo --------------------------------------
 520
 521 showtarget:
 522         @echo
 523         @echo --------- Target Information ---------
 524         @echo AVR Model: $(MCU)
 525         @echo Board:     $(BOARD)
 526         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 527         @echo --------------------------------------
 528
 529
 530 # Display compiler version information.
 531 gccversion :
 532         @$(CC) --version
 533
 534
 535 # Program the device.
 536 program: $(TARGET).hex $(TARGET).eep
 537         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 538
 539 flip: $(TARGET).hex
 540         batchisp -hardware usb -device $(MCU) -operation erase f
 541         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 542         batchisp -hardware usb -device $(MCU) -operation start reset 0
 543
 544 dfu: $(TARGET).hex
 545         dfu-programmer $(MCU) erase
 546         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 547         dfu-programmer $(MCU) reset
 548
 549 flip-ee: $(TARGET).hex $(TARGET).eep
 550         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 551         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 552         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 553         batchisp -hardware usb -device $(MCU) -operation start reset 0
 554         $(REMOVE) $(TARGET)eep.hex
 555
 556 dfu-ee: $(TARGET).hex $(TARGET).eep
 557         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 558         dfu-programmer $(MCU) reset
 559
 560
 561 # Generate avr-gdb config/init file which does the following:
 562 #     define the reset signal, load the target file, connect to target, and set
 563 #     a breakpoint at main().
 564 gdb-config:
 565         @$(REMOVE) $(GDBINIT_FILE)
 566         @echo define reset >> $(GDBINIT_FILE)
 567         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 568         @echo end >> $(GDBINIT_FILE)
 569         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 570         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 571 ifeq ($(DEBUG_BACKEND),simulavr)
 572         @echo load  >> $(GDBINIT_FILE)
 573 endif
 574         @echo break main >> $(GDBINIT_FILE)
 575
 576 debug: gdb-config $(TARGET).elf
 577 ifeq ($(DEBUG_BACKEND), avarice)
 578         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 579         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 580         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 581         @$(WINSHELL) /c pause
 582
 583 else
 584         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 585         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 586 endif
 587         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 588
 589
 590
 591
 592 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 593 COFFCONVERT = $(OBJCOPY) --debugging
 594 COFFCONVERT += --change-section-address .data-0x800000
 595 COFFCONVERT += --change-section-address .bss-0x800000
 596 COFFCONVERT += --change-section-address .noinit-0x800000
 597 COFFCONVERT += --change-section-address .eeprom-0x810000
 598
 599
 600
 601 coff: $(TARGET).elf
 602         @echo
 603         @echo $(MSG_COFF) $(TARGET).cof
 604         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 605
 606
 607 extcoff: $(TARGET).elf
 608         @echo
 609         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 610         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 611
 612
 613
 614 # Create final output files (.hex, .eep) from ELF output file.
 615 %.hex: %.elf
 616         @echo
 617         @echo $(MSG_FLASH) $@
 618         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 619
 620 %.eep: %.elf
 621         @echo
 622         @echo $(MSG_EEPROM) $@
 623         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 624         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 625
 626 # Create extended listing file from ELF output file.
 627 %.lss: %.elf
 628         @echo
 629         @echo $(MSG_EXTENDED_LISTING) $@
 630         $(OBJDUMP) -h -z -S $< > $@
 631
 632 # Create a symbol table from ELF output file.
 633 %.sym: %.elf
 634         @echo
 635         @echo $(MSG_SYMBOL_TABLE) $@
 636         $(NM) -n $< > $@
 637
 638
 639
 640 # Create library from object files.
 641 .SECONDARY : $(TARGET).a
 642 .PRECIOUS : $(OBJ)
 643 %.a: $(OBJ)
 644         @echo
 645         @echo $(MSG_CREATING_LIBRARY) $@
 646         $(AR) $@ $(OBJ)
 647
 648
 649 # Link: create ELF output file from object files.
 650 .SECONDARY : $(TARGET).elf
 651 .PRECIOUS : $(OBJ)
 652 %.elf: $(OBJ)
 653         @echo
 654         @echo $(MSG_LINKING) $@
 655         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 656
 657
 658 # Compile: create object files from C source files.
 659 $(OBJDIR)/%.o : %.c
 660         @echo
 661         @echo $(MSG_COMPILING) $<
 662         $(CC) -c $(ALL_CFLAGS) $< -o $@
 663
 664
 665 # Compile: create object files from C++ source files.
 666 $(OBJDIR)/%.o : %.cpp
 667         @echo
 668         @echo $(MSG_COMPILING_CPP) $<
 669         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 670
 671
 672 # Compile: create assembler files from C source files.
 673 %.s : %.c
 674         $(CC) -S $(ALL_CFLAGS) $< -o $@
 675
 676
 677 # Compile: create assembler files from C++ source files.
 678 %.s : %.cpp
 679         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 680
 681
 682 # Assemble: create object files from assembler source files.
 683 $(OBJDIR)/%.o : %.S
 684         @echo
 685         @echo $(MSG_ASSEMBLING) $<
 686         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 687
 688
 689 # Create preprocessed source for use in sending a bug report.
 690 %.i : %.c
 691         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 692
 693
 694 # Target: clean project.
 695 clean: begin clean_list clean_binary end
 696
 697 clean_binary:
 698         $(REMOVE) $(TARGET).hex
 699
 700 clean_list:
 701         @echo $(MSG_CLEANING)
 702         $(REMOVE) $(TARGET).eep
 703         $(REMOVE) $(TARGET)eep.hex
 704         $(REMOVE) $(TARGET).cof
 705         $(REMOVE) $(TARGET).elf
 706         $(REMOVE) $(TARGET).map
 707         $(REMOVE) $(TARGET).sym
 708         $(REMOVE) $(TARGET).lss
 709         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 710         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 711         $(REMOVE) $(SRC:.c=.s)
 712         $(REMOVE) $(SRC:.c=.d)
 713         $(REMOVE) $(SRC:.c=.i)
 714         $(REMOVE) InvalidEvents.tmp
 715         $(REMOVEDIR) .dep
 716
 717 doxygen:
 718         @echo Generating Project Documentation...
 719         @doxygen Doxygen.conf
 720         @echo Documentation Generation Complete.
 721
 722 clean_doxygen:
 723         rm -rf Documentation
 724
 725 # Create object files directory
 726 $(shell mkdir $(OBJDIR) 2>/dev/null)
 727
 728
 729 # Include the dependency files.
 730 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 731
 732
 733 # Listing of phony targets.
 734 .PHONY : all showliboptions showtarget begin       \
 735 finish end sizebefore sizeafter gccversion build   \
 736 elf hex eep lss sym coff extcoff program dfu flip  \
 737 flip-ee dfu-ee clean debug clean_list clean_binary \
 738 clean_doxygen gdb-config doxygen