Projects/Webserver/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = Webserver
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../..
 116
 117
 118 # LUFA library compile-time options and predefined tokens
 119 LUFA_OPTS  = -D FIXED_CONTROL_ENDPOINT_SIZE=8
 120 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 121 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 122 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 123 LUFA_OPTS += -D FAST_STREAM_TRANSFERS
 124 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 125 LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
 126
 127 LUFA_OPTS += -D ENABLE_DHCP_CLIENT
 128 LUFA_OPTS += -D ENABLE_TELNET_SERVER
 129 LUFA_OPTS += -D MAX_URI_LENGTH=50
 130 LUFA_OPTS += -D UIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT)"
 131 LUFA_OPTS += -D UIP_CONF_TCP=1
 132 LUFA_OPTS += -D UIP_CONF_UDP_CONNS=1
 133 LUFA_OPTS += -D UIP_CONF_MAX_CONNECTIONS=3
 134 LUFA_OPTS += -D UIP_CONF_MAX_LISTENPORTS=5
 135 LUFA_OPTS += -D UIP_URGDATA=0
 136 LUFA_OPTS += -D UIP_CONF_BUFFER_SIZE=1514
 137 LUFA_OPTS += -D UIP_ARCH_CHKSUM=0
 138 LUFA_OPTS += -D UIP_CONF_LL_802154=0
 139 LUFA_OPTS += -D UIP_CONF_LL_80211=0
 140 LUFA_OPTS += -D UIP_CONF_ROUTER=0
 141 LUFA_OPTS += -D UIP_CONF_ICMP6=0
 142 LUFA_OPTS += -D UIP_ARCH_ADD32=0
 143 LUFA_OPTS += -D UIP_CONF_ICMP_DEST_UNREACH=1
 144 LUFA_OPTS += -D UIP_NEIGHBOR_CONF_ADDRTYPE=0
 145
 146
 147 # Create the LUFA source path variables by including the LUFA root makefile
 148 include $(LUFA_PATH)/LUFA/makefile
 149
 150
 151 # List C source files here. (C dependencies are automatically generated.)
 152 SRC = $(TARGET).c                                                 \
 153           Descriptors.c                                               \
 154           USBDeviceMode.c                                             \
 155           USBHostMode.c                                               \
 156           Lib/SCSI.c                                                  \
 157           Lib/DataflashManager.c                                      \
 158           Lib/uIPManagement.c                                         \
 159           Lib/DHCPClientApp.c                                         \
 160           Lib/HTTPServerApp.c                                         \
 161           Lib/TELNETServerApp.c                                       \
 162           Lib/uip/uip.c                                               \
 163           Lib/uip/uip_arp.c                                           \
 164           Lib/uip/timer.c                                             \
 165           Lib/uip/clock.c                                             \
 166           Lib/uip/uip-split.c                                         \
 167           Lib/FATFs/diskio.c                                          \
 168           Lib/FATFs/ff.c                                              \
 169           $(LUFA_SRC_USB)                                             \
 170           $(LUFA_SRC_USBCLASS)
 171
 172
 173 # List C++ source files here. (C dependencies are automatically generated.)
 174 CPPSRC =
 175
 176
 177 # List Assembler source files here.
 178 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 179 #     will not be considered source files but generated files (assembler
 180 #     output from the compiler), and will be deleted upon "make clean"!
 181 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 182 #     it will preserve the spelling of the filenames, and gcc itself does
 183 #     care about how the name is spelled on its command-line.
 184 ASRC =
 185
 186
 187 # Optimization level, can be [0, 1, 2, 3, s].
 188 #     0 = turn off optimization. s = optimize for size.
 189 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 190 OPT = s
 191
 192
 193 # Debugging format.
 194 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 195 #     AVR Studio 4.10 requires dwarf-2.
 196 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 197 DEBUG = dwarf-2
 198
 199
 200 # List any extra directories to look for include files here.
 201 #     Each directory must be seperated by a space.
 202 #     Use forward slashes for directory separators.
 203 #     For a directory that has spaces, enclose it in quotes.
 204 EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
 205
 206
 207 # Compiler flag to set the C Standard level.
 208 #     c89   = "ANSI" C
 209 #     gnu89 = c89 plus GCC extensions
 210 #     c99   = ISO C99 standard (not yet fully implemented)
 211 #     gnu99 = c99 plus GCC extensions
 212 CSTANDARD = -std=c99
 213
 214
 215 # Place -D or -U options here for C sources
 216 CDEFS  = -DF_CPU=$(F_CPU)UL
 217 CDEFS += -DF_CLOCK=$(F_CLOCK)UL
 218 CDEFS += -DBOARD=BOARD_$(BOARD)
 219 CDEFS += $(LUFA_OPTS)
 220
 221
 222 # Place -D or -U options here for ASM sources
 223 ADEFS  = -DF_CPU=$(F_CPU)
 224 ADEFS += -DF_CLOCK=$(F_CLOCK)UL
 225 ADEFS += -DBOARD=BOARD_$(BOARD)
 226 ADEFS += $(LUFA_OPTS)
 227
 228 # Place -D or -U options here for C++ sources
 229 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 230 CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
 231 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 232 CPPDEFS += $(LUFA_OPTS)
 233 #CPPDEFS += -D__STDC_LIMIT_MACROS
 234 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 235
 236
 237
 238 #---------------- Compiler Options C ----------------
 239 #  -g*:          generate debugging information
 240 #  -O*:          optimization level
 241 #  -f...:        tuning, see GCC manual and avr-libc documentation
 242 #  -Wall...:     warning level
 243 #  -Wa,...:      tell GCC to pass this to the assembler.
 244 #    -adhlns...: create assembler listing
 245 CFLAGS = -g$(DEBUG)
 246 CFLAGS += $(CDEFS)
 247 CFLAGS += -O$(OPT)
 248 CFLAGS += -funsigned-char
 249 CFLAGS += -funsigned-bitfields
 250 CFLAGS += -ffunction-sections
 251 CFLAGS += -fno-inline-small-functions
 252 CFLAGS += -fpack-struct
 253 CFLAGS += -fshort-enums
 254 CFLAGS += -fno-strict-aliasing
 255 CFLAGS += -Wall
 256 CFLAGS += -Wstrict-prototypes
 257 #CFLAGS += -mshort-calls
 258 #CFLAGS += -fno-unit-at-a-time
 259 #CFLAGS += -Wundef
 260 #CFLAGS += -Wunreachable-code
 261 #CFLAGS += -Wsign-compare
 262 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 263 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 264 CFLAGS += $(CSTANDARD)
 265
 266
 267 #---------------- Compiler Options C++ ----------------
 268 #  -g*:          generate debugging information
 269 #  -O*:          optimization level
 270 #  -f...:        tuning, see GCC manual and avr-libc documentation
 271 #  -Wall...:     warning level
 272 #  -Wa,...:      tell GCC to pass this to the assembler.
 273 #    -adhlns...: create assembler listing
 274 CPPFLAGS = -g$(DEBUG)
 275 CPPFLAGS += $(CPPDEFS)
 276 CPPFLAGS += -O$(OPT)
 277 CPPFLAGS += -funsigned-char
 278 CPPFLAGS += -funsigned-bitfields
 279 CPPFLAGS += -fpack-struct
 280 CPPFLAGS += -fshort-enums
 281 CPPFLAGS += -fno-exceptions
 282 CPPFLAGS += -Wall
 283 CPPFLAGS += -Wundef
 284 #CPPFLAGS += -mshort-calls
 285 #CPPFLAGS += -fno-unit-at-a-time
 286 #CPPFLAGS += -Wstrict-prototypes
 287 #CPPFLAGS += -Wunreachable-code
 288 #CPPFLAGS += -Wsign-compare
 289 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 290 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 291 #CPPFLAGS += $(CSTANDARD)
 292
 293
 294 #---------------- Assembler Options ----------------
 295 #  -Wa,...:   tell GCC to pass this to the assembler.
 296 #  -adhlns:   create listing
 297 #  -gstabs:   have the assembler create line number information; note that
 298 #             for use in COFF files, additional information about filenames
 299 #             and function names needs to be present in the assembler source
 300 #             files -- see avr-libc docs [FIXME: not yet described there]
 301 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 302 #       dump that will be displayed for a given single line of source input.
 303 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 304
 305
 306 #---------------- Library Options ----------------
 307 # Minimalistic printf version
 308 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 309
 310 # Floating point printf version (requires MATH_LIB = -lm below)
 311 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 312
 313 # If this is left blank, then it will use the Standard printf version.
 314 PRINTF_LIB =
 315 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 316 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 317
 318
 319 # Minimalistic scanf version
 320 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 321
 322 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 323 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 324
 325 # If this is left blank, then it will use the Standard scanf version.
 326 SCANF_LIB =
 327 #SCANF_LIB = $(SCANF_LIB_MIN)
 328 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 329
 330
 331 MATH_LIB = -lm
 332
 333
 334 # List any extra directories to look for libraries here.
 335 #     Each directory must be seperated by a space.
 336 #     Use forward slashes for directory separators.
 337 #     For a directory that has spaces, enclose it in quotes.
 338 EXTRALIBDIRS =
 339
 340
 341
 342 #---------------- External Memory Options ----------------
 343
 344 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 345 # used for variables (.data/.bss) and heap (malloc()).
 346 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 347
 348 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 349 # only used for heap (malloc()).
 350 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 351
 352 EXTMEMOPTS =
 353
 354
 355
 356 #---------------- Linker Options ----------------
 357 #  -Wl,...:     tell GCC to pass this to linker.
 358 #    -Map:      create map file
 359 #    --cref:    add cross reference to  map file
 360 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 361 LDFLAGS += -Wl,--relax
 362 LDFLAGS += -Wl,--gc-sections
 363 LDFLAGS += $(EXTMEMOPTS)
 364 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 365 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 366 #LDFLAGS += -T linker_script.x
 367
 368
 369
 370 #---------------- Programming Options (avrdude) ----------------
 371
 372 # Programming hardware
 373 # Type: avrdude -c ?
 374 # to get a full listing.
 375 #
 376 AVRDUDE_PROGRAMMER = jtagmkII
 377
 378 # com1 = serial port. Use lpt1 to connect to parallel port.
 379 AVRDUDE_PORT = usb
 380
 381 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 382 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 383
 384
 385 # Uncomment the following if you want avrdude's erase cycle counter.
 386 # Note that this counter needs to be initialized first using -Yn,
 387 # see avrdude manual.
 388 #AVRDUDE_ERASE_COUNTER = -y
 389
 390 # Uncomment the following if you do /not/ wish a verification to be
 391 # performed after programming the device.
 392 #AVRDUDE_NO_VERIFY = -V
 393
 394 # Increase verbosity level.  Please use this when submitting bug
 395 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 396 # to submit bug reports.
 397 #AVRDUDE_VERBOSE = -v -v
 398
 399 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 400 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 401 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 402 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 403
 404
 405
 406 #---------------- Debugging Options ----------------
 407
 408 # For simulavr only - target MCU frequency.
 409 DEBUG_MFREQ = $(F_CPU)
 410
 411 # Set the DEBUG_UI to either gdb or insight.
 412 # DEBUG_UI = gdb
 413 DEBUG_UI = insight
 414
 415 # Set the debugging back-end to either avarice, simulavr.
 416 DEBUG_BACKEND = avarice
 417 #DEBUG_BACKEND = simulavr
 418
 419 # GDB Init Filename.
 420 GDBINIT_FILE = __avr_gdbinit
 421
 422 # When using avarice settings for the JTAG
 423 JTAG_DEV = /dev/com1
 424
 425 # Debugging port used to communicate between GDB / avarice / simulavr.
 426 DEBUG_PORT = 4242
 427
 428 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 429 #     just set to localhost unless doing some sort of crazy debugging when
 430 #     avarice is running on a different computer.
 431 DEBUG_HOST = localhost
 432
 433
 434
 435 #============================================================================
 436
 437
 438 # Define programs and commands.
 439 SHELL = sh
 440 CC = avr-gcc
 441 OBJCOPY = avr-objcopy
 442 OBJDUMP = avr-objdump
 443 SIZE = avr-size
 444 AR = avr-ar rcs
 445 NM = avr-nm
 446 AVRDUDE = avrdude
 447 REMOVE = rm -f
 448 REMOVEDIR = rm -rf
 449 COPY = cp
 450 WINSHELL = cmd
 451
 452
 453 # Define Messages
 454 # English
 455 MSG_ERRORS_NONE = Errors: none
 456 MSG_BEGIN = -------- begin --------
 457 MSG_END = --------  end  --------
 458 MSG_SIZE_BEFORE = Size before:
 459 MSG_SIZE_AFTER = Size after:
 460 MSG_COFF = Converting to AVR COFF:
 461 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 462 MSG_FLASH = Creating load file for Flash:
 463 MSG_EEPROM = Creating load file for EEPROM:
 464 MSG_EXTENDED_LISTING = Creating Extended Listing:
 465 MSG_SYMBOL_TABLE = Creating Symbol Table:
 466 MSG_LINKING = Linking:
 467 MSG_COMPILING = Compiling C:
 468 MSG_COMPILING_CPP = Compiling C++:
 469 MSG_ASSEMBLING = Assembling:
 470 MSG_CLEANING = Cleaning project:
 471 MSG_CREATING_LIBRARY = Creating library:
 472
 473
 474
 475
 476 # Define all object files.
 477 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 478
 479 # Define all listing files.
 480 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 481
 482
 483 # Compiler flags to generate dependency files.
 484 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 485
 486
 487 # Combine all necessary flags and optional flags.
 488 # Add target processor to flags.
 489 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 490 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 491 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 492
 493
 494
 495
 496
 497 # Default target.
 498 all: begin gccversion sizebefore build sizeafter end
 499
 500 # Change the build target to build a HEX file or a library.
 501 build: elf hex eep lss sym
 502 #build: lib
 503
 504
 505 elf: $(TARGET).elf
 506 hex: $(TARGET).hex
 507 eep: $(TARGET).eep
 508 lss: $(TARGET).lss
 509 sym: $(TARGET).sym
 510 LIBNAME=lib$(TARGET).a
 511 lib: $(LIBNAME)
 512
 513
 514
 515 # Eye candy.
 516 # AVR Studio 3.x does not check make's exit code but relies on
 517 # the following magic strings to be generated by the compile job.
 518 begin:
 519         @echo
 520         @echo $(MSG_BEGIN)
 521
 522 end:
 523         @echo $(MSG_END)
 524         @echo
 525
 526
 527 # Display size of file.
 528 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 529 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 530 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 531 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 532
 533
 534 sizebefore:
 535         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 536         2>/dev/null; echo; fi
 537
 538 sizeafter:
 539         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 540         2>/dev/null; echo; fi
 541
 542
 543
 544 # Display compiler version information.
 545 gccversion :
 546         @$(CC) --version
 547
 548
 549 # Program the device.
 550 program: $(TARGET).hex $(TARGET).eep
 551         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 552
 553 flip: $(TARGET).hex
 554         batchisp -hardware usb -device $(MCU) -operation erase f
 555         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 556         batchisp -hardware usb -device $(MCU) -operation start reset 0
 557
 558 dfu: $(TARGET).hex
 559         dfu-programmer $(MCU) erase
 560         dfu-programmer $(MCU) flash $(TARGET).hex
 561         dfu-programmer $(MCU) reset
 562
 563 flip-ee: $(TARGET).hex $(TARGET).eep
 564         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 565         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 566         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 567         batchisp -hardware usb -device $(MCU) -operation start reset 0
 568         $(REMOVE) $(TARGET)eep.hex
 569
 570 dfu-ee: $(TARGET).hex $(TARGET).eep
 571         dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 572         dfu-programmer $(MCU) reset
 573
 574
 575 # Generate avr-gdb config/init file which does the following:
 576 #     define the reset signal, load the target file, connect to target, and set
 577 #     a breakpoint at main().
 578 gdb-config:
 579         @$(REMOVE) $(GDBINIT_FILE)
 580         @echo define reset >> $(GDBINIT_FILE)
 581         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 582         @echo end >> $(GDBINIT_FILE)
 583         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 584         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 585 ifeq ($(DEBUG_BACKEND),simulavr)
 586         @echo load  >> $(GDBINIT_FILE)
 587 endif
 588         @echo break main >> $(GDBINIT_FILE)
 589
 590 debug: gdb-config $(TARGET).elf
 591 ifeq ($(DEBUG_BACKEND), avarice)
 592         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 593         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 594         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 595         @$(WINSHELL) /c pause
 596
 597 else
 598         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 599         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 600 endif
 601         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 602
 603
 604
 605
 606 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 607 COFFCONVERT = $(OBJCOPY) --debugging
 608 COFFCONVERT += --change-section-address .data-0x800000
 609 COFFCONVERT += --change-section-address .bss-0x800000
 610 COFFCONVERT += --change-section-address .noinit-0x800000
 611 COFFCONVERT += --change-section-address .eeprom-0x810000
 612
 613
 614
 615 coff: $(TARGET).elf
 616         @echo
 617         @echo $(MSG_COFF) $(TARGET).cof
 618         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 619
 620
 621 extcoff: $(TARGET).elf
 622         @echo
 623         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 624         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 625
 626
 627
 628 # Create final output files (.hex, .eep) from ELF output file.
 629 %.hex: %.elf
 630         @echo
 631         @echo $(MSG_FLASH) $@
 632         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 633
 634 %.eep: %.elf
 635         @echo
 636         @echo $(MSG_EEPROM) $@
 637         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 638         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 639
 640 # Create extended listing file from ELF output file.
 641 %.lss: %.elf
 642         @echo
 643         @echo $(MSG_EXTENDED_LISTING) $@
 644         $(OBJDUMP) -h -S -z $< > $@
 645
 646 # Create a symbol table from ELF output file.
 647 %.sym: %.elf
 648         @echo
 649         @echo $(MSG_SYMBOL_TABLE) $@
 650         $(NM) -n $< > $@
 651
 652
 653
 654 # Create library from object files.
 655 .SECONDARY : $(TARGET).a
 656 .PRECIOUS : $(OBJ)
 657 %.a: $(OBJ)
 658         @echo
 659         @echo $(MSG_CREATING_LIBRARY) $@
 660         $(AR) $@ $(OBJ)
 661
 662
 663 # Link: create ELF output file from object files.
 664 .SECONDARY : $(TARGET).elf
 665 .PRECIOUS : $(OBJ)
 666 %.elf: $(OBJ)
 667         @echo
 668         @echo $(MSG_LINKING) $@
 669         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 670
 671
 672 # Compile: create object files from C source files.
 673 $(OBJDIR)/%.o : %.c
 674         @echo
 675         @echo $(MSG_COMPILING) $<
 676         $(CC) -c $(ALL_CFLAGS) $< -o $@
 677
 678
 679 # Compile: create object files from C++ source files.
 680 $(OBJDIR)/%.o : %.cpp
 681         @echo
 682         @echo $(MSG_COMPILING_CPP) $<
 683         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 684
 685
 686 # Compile: create assembler files from C source files.
 687 %.s : %.c
 688         $(CC) -S $(ALL_CFLAGS) $< -o $@
 689
 690
 691 # Compile: create assembler files from C++ source files.
 692 %.s : %.cpp
 693         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 694
 695
 696 # Assemble: create object files from assembler source files.
 697 $(OBJDIR)/%.o : %.S
 698         @echo
 699         @echo $(MSG_ASSEMBLING) $<
 700         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 701
 702
 703 # Create preprocessed source for use in sending a bug report.
 704 %.i : %.c
 705         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 706
 707
 708 # Target: clean project.
 709 clean: begin clean_list end
 710
 711 clean_list :
 712         @echo
 713         @echo $(MSG_CLEANING)
 714         $(REMOVE) $(TARGET).hex
 715         $(REMOVE) $(TARGET).eep
 716         $(REMOVE) $(TARGET).cof
 717         $(REMOVE) $(TARGET).elf
 718         $(REMOVE) $(TARGET).map
 719         $(REMOVE) $(TARGET).sym
 720         $(REMOVE) $(TARGET).lss
 721         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 722         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 723         $(REMOVE) $(SRC:.c=.s)
 724         $(REMOVE) $(SRC:.c=.d)
 725         $(REMOVE) $(SRC:.c=.i)
 726         $(REMOVEDIR) .dep
 727
 728 doxygen:
 729         @echo Generating Project Documentation...
 730         @doxygen Doxygen.conf
 731         @echo Documentation Generation Complete.
 732
 733 clean_doxygen:
 734         rm -rf Documentation
 735
 736 # Create object files directory
 737 $(shell mkdir $(OBJDIR) 2>/dev/null)
 738
 739
 740 # Include the dependency files.
 741 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 742
 743
 744 # Listing of phony targets.
 745 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 746 build elf hex eep lss sym coff extcoff doxygen clean          \
 747 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 748 debug gdb-config
 749