Demos/Device/ClassDriver/VirtualSerialMouse/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = CDCMouse
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../../../..
 116
 117
 118 # LUFA library compile-time options
 119 LUFA_OPTS  = -D USB_DEVICE_ONLY
 120 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 121 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 122 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 123 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 124
 125
 126 # List C source files here. (C dependencies are automatically generated.)
 127 SRC = $(TARGET).c                                                 \
 128           Descriptors.c                                               \
 129           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 130           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 131           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 132           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 133           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 134           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 135           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 136           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 137           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 138           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 139           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/CDC.c            \
 140           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/CDC.c              \
 141           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c            \
 142           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c              \
 143
 144
 145 # List C++ source files here. (C dependencies are automatically generated.)
 146 CPPSRC =
 147
 148
 149 # List Assembler source files here.
 150 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 151 #     will not be considered source files but generated files (assembler
 152 #     output from the compiler), and will be deleted upon "make clean"!
 153 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 154 #     it will preserve the spelling of the filenames, and gcc itself does
 155 #     care about how the name is spelled on its command-line.
 156 ASRC =
 157
 158
 159 # Optimization level, can be [0, 1, 2, 3, s].
 160 #     0 = turn off optimization. s = optimize for size.
 161 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 162 OPT = s
 163
 164
 165 # Debugging format.
 166 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 167 #     AVR Studio 4.10 requires dwarf-2.
 168 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 169 DEBUG = dwarf-2
 170
 171
 172 # List any extra directories to look for include files here.
 173 #     Each directory must be seperated by a space.
 174 #     Use forward slashes for directory separators.
 175 #     For a directory that has spaces, enclose it in quotes.
 176 EXTRAINCDIRS = $(LUFA_PATH)/
 177
 178
 179 # Compiler flag to set the C Standard level.
 180 #     c89   = "ANSI" C
 181 #     gnu89 = c89 plus GCC extensions
 182 #     c99   = ISO C99 standard (not yet fully implemented)
 183 #     gnu99 = c99 plus GCC extensions
 184 CSTANDARD = -std=gnu99
 185
 186
 187 # Place -D or -U options here for C sources
 188 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 189
 190
 191 # Place -D or -U options here for ASM sources
 192 ADEFS = -DF_CPU=$(F_CPU)
 193
 194
 195 # Place -D or -U options here for C++ sources
 196 CPPDEFS = -DF_CPU=$(F_CPU)UL
 197 #CPPDEFS += -D__STDC_LIMIT_MACROS
 198 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 199
 200
 201
 202 #---------------- Compiler Options C ----------------
 203 #  -g*:          generate debugging information
 204 #  -O*:          optimization level
 205 #  -f...:        tuning, see GCC manual and avr-libc documentation
 206 #  -Wall...:     warning level
 207 #  -Wa,...:      tell GCC to pass this to the assembler.
 208 #    -adhlns...: create assembler listing
 209 CFLAGS = -g$(DEBUG)
 210 CFLAGS += $(CDEFS)
 211 CFLAGS += -O$(OPT)
 212 CFLAGS += -funsigned-char
 213 CFLAGS += -funsigned-bitfields
 214 CFLAGS += -ffunction-sections
 215 CFLAGS += -fno-inline-small-functions
 216 CFLAGS += -fpack-struct
 217 CFLAGS += -fshort-enums
 218 CFLAGS += -Wall
 219 CFLAGS += -Wstrict-prototypes
 220 CFLAGS += -Wundef
 221 #CFLAGS += -fno-unit-at-a-time
 222 #CFLAGS += -Wunreachable-code
 223 #CFLAGS += -Wsign-compare
 224 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 225 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 226 CFLAGS += $(CSTANDARD)
 227
 228
 229 #---------------- Compiler Options C++ ----------------
 230 #  -g*:          generate debugging information
 231 #  -O*:          optimization level
 232 #  -f...:        tuning, see GCC manual and avr-libc documentation
 233 #  -Wall...:     warning level
 234 #  -Wa,...:      tell GCC to pass this to the assembler.
 235 #    -adhlns...: create assembler listing
 236 CPPFLAGS = -g$(DEBUG)
 237 CPPFLAGS += $(CPPDEFS)
 238 CPPFLAGS += -O$(OPT)
 239 CPPFLAGS += -funsigned-char
 240 CPPFLAGS += -funsigned-bitfields
 241 CPPFLAGS += -fpack-struct
 242 CPPFLAGS += -fshort-enums
 243 CPPFLAGS += -fno-exceptions
 244 CPPFLAGS += -Wall
 245 CFLAGS += -Wundef
 246 #CPPFLAGS += -mshort-calls
 247 #CPPFLAGS += -fno-unit-at-a-time
 248 #CPPFLAGS += -Wstrict-prototypes
 249 #CPPFLAGS += -Wunreachable-code
 250 #CPPFLAGS += -Wsign-compare
 251 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 252 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 253 #CPPFLAGS += $(CSTANDARD)
 254
 255
 256 #---------------- Assembler Options ----------------
 257 #  -Wa,...:   tell GCC to pass this to the assembler.
 258 #  -adhlns:   create listing
 259 #  -gstabs:   have the assembler create line number information; note that
 260 #             for use in COFF files, additional information about filenames
 261 #             and function names needs to be present in the assembler source
 262 #             files -- see avr-libc docs [FIXME: not yet described there]
 263 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 264 #       dump that will be displayed for a given single line of source input.
 265 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 266
 267
 268 #---------------- Library Options ----------------
 269 # Minimalistic printf version
 270 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 271
 272 # Floating point printf version (requires MATH_LIB = -lm below)
 273 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 274
 275 # If this is left blank, then it will use the Standard printf version.
 276 PRINTF_LIB =
 277 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 278 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 279
 280
 281 # Minimalistic scanf version
 282 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 283
 284 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 285 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 286
 287 # If this is left blank, then it will use the Standard scanf version.
 288 SCANF_LIB =
 289 #SCANF_LIB = $(SCANF_LIB_MIN)
 290 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 291
 292
 293 MATH_LIB = -lm
 294
 295
 296 # List any extra directories to look for libraries here.
 297 #     Each directory must be seperated by a space.
 298 #     Use forward slashes for directory separators.
 299 #     For a directory that has spaces, enclose it in quotes.
 300 EXTRALIBDIRS =
 301
 302
 303
 304 #---------------- External Memory Options ----------------
 305
 306 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 307 # used for variables (.data/.bss) and heap (malloc()).
 308 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 309
 310 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 311 # only used for heap (malloc()).
 312 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 313
 314 EXTMEMOPTS =
 315
 316
 317
 318 #---------------- Linker Options ----------------
 319 #  -Wl,...:     tell GCC to pass this to linker.
 320 #    -Map:      create map file
 321 #    --cref:    add cross reference to  map file
 322 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 323 LDFLAGS += -Wl,--relax
 324 LDFLAGS += -Wl,--gc-sections
 325 LDFLAGS += $(EXTMEMOPTS)
 326 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 327 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 328 #LDFLAGS += -T linker_script.x
 329
 330
 331
 332 #---------------- Programming Options (avrdude) ----------------
 333
 334 # Programming hardware: alf avr910 avrisp bascom bsd
 335 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 336 #
 337 # Type: avrdude -c ?
 338 # to get a full listing.
 339 #
 340 AVRDUDE_PROGRAMMER = jtagmkII
 341
 342 # com1 = serial port. Use lpt1 to connect to parallel port.
 343 AVRDUDE_PORT = usb
 344
 345 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 346 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 347
 348
 349 # Uncomment the following if you want avrdude's erase cycle counter.
 350 # Note that this counter needs to be initialized first using -Yn,
 351 # see avrdude manual.
 352 #AVRDUDE_ERASE_COUNTER = -y
 353
 354 # Uncomment the following if you do /not/ wish a verification to be
 355 # performed after programming the device.
 356 #AVRDUDE_NO_VERIFY = -V
 357
 358 # Increase verbosity level.  Please use this when submitting bug
 359 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 360 # to submit bug reports.
 361 #AVRDUDE_VERBOSE = -v -v
 362
 363 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 364 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 365 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 366 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 367
 368
 369
 370 #---------------- Debugging Options ----------------
 371
 372 # For simulavr only - target MCU frequency.
 373 DEBUG_MFREQ = $(F_CPU)
 374
 375 # Set the DEBUG_UI to either gdb or insight.
 376 # DEBUG_UI = gdb
 377 DEBUG_UI = insight
 378
 379 # Set the debugging back-end to either avarice, simulavr.
 380 DEBUG_BACKEND = avarice
 381 #DEBUG_BACKEND = simulavr
 382
 383 # GDB Init Filename.
 384 GDBINIT_FILE = __avr_gdbinit
 385
 386 # When using avarice settings for the JTAG
 387 JTAG_DEV = /dev/com1
 388
 389 # Debugging port used to communicate between GDB / avarice / simulavr.
 390 DEBUG_PORT = 4242
 391
 392 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 393 #     just set to localhost unless doing some sort of crazy debugging when
 394 #     avarice is running on a different computer.
 395 DEBUG_HOST = localhost
 396
 397
 398
 399 #============================================================================
 400
 401
 402 # Define programs and commands.
 403 SHELL = sh
 404 CC = avr-gcc
 405 OBJCOPY = avr-objcopy
 406 OBJDUMP = avr-objdump
 407 SIZE = avr-size
 408 AR = avr-ar rcs
 409 NM = avr-nm
 410 AVRDUDE = avrdude
 411 REMOVE = rm -f
 412 REMOVEDIR = rm -rf
 413 COPY = cp
 414 WINSHELL = cmd
 415
 416 # Define Messages
 417 # English
 418 MSG_ERRORS_NONE = Errors: none
 419 MSG_BEGIN = -------- begin --------
 420 MSG_END = --------  end  --------
 421 MSG_SIZE_BEFORE = Size before:
 422 MSG_SIZE_AFTER = Size after:
 423 MSG_COFF = Converting to AVR COFF:
 424 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 425 MSG_FLASH = Creating load file for Flash:
 426 MSG_EEPROM = Creating load file for EEPROM:
 427 MSG_EXTENDED_LISTING = Creating Extended Listing:
 428 MSG_SYMBOL_TABLE = Creating Symbol Table:
 429 MSG_LINKING = Linking:
 430 MSG_COMPILING = Compiling C:
 431 MSG_COMPILING_CPP = Compiling C++:
 432 MSG_ASSEMBLING = Assembling:
 433 MSG_CLEANING = Cleaning project:
 434 MSG_CREATING_LIBRARY = Creating library:
 435
 436
 437
 438
 439 # Define all object files.
 440 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 441
 442 # Define all listing files.
 443 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 444
 445
 446 # Compiler flags to generate dependency files.
 447 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 448
 449
 450 # Combine all necessary flags and optional flags.
 451 # Add target processor to flags.
 452 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 453 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 454 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 455
 456
 457
 458
 459
 460 # Default target.
 461 all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
 462
 463 # Change the build target to build a HEX file or a library.
 464 build: elf hex eep lss sym
 465 #build: lib
 466
 467
 468 elf: $(TARGET).elf
 469 hex: $(TARGET).hex
 470 eep: $(TARGET).eep
 471 lss: $(TARGET).lss
 472 sym: $(TARGET).sym
 473 LIBNAME=lib$(TARGET).a
 474 lib: $(LIBNAME)
 475
 476
 477
 478 # Eye candy.
 479 # AVR Studio 3.x does not check make's exit code but relies on
 480 # the following magic strings to be generated by the compile job.
 481 begin:
 482         @echo
 483         @echo $(MSG_BEGIN)
 484
 485 end:
 486         @echo $(MSG_END)
 487         @echo
 488
 489
 490 # Display size of file.
 491 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 492 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 493 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 494 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 495
 496 sizebefore:
 497         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 498         2>/dev/null; echo; fi
 499
 500 sizeafter:
 501         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 502         2>/dev/null; echo; fi
 503
 504 $(LUFA_PATH)/LUFA/LUFA_Events.lst:
 505         @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
 506
 507 checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
 508         @echo
 509         @echo Checking for invalid events...
 510         @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
 511                          grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
 512         @sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
 513         @if test -s InvalidEvents.tmp; then exit 1; fi
 514
 515 showliboptions:
 516         @echo
 517         @echo ---- Compile Time Library Options ----
 518         @for i in $(LUFA_OPTS:-D%=%); do \
 519                 echo $$i; \
 520         done
 521         @echo --------------------------------------
 522
 523 showtarget:
 524         @echo
 525         @echo --------- Target Information ---------
 526         @echo AVR Model: $(MCU)
 527         @echo Board:     $(BOARD)
 528         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 529         @echo --------------------------------------
 530
 531
 532 # Display compiler version information.
 533 gccversion :
 534         @$(CC) --version
 535
 536
 537 # Program the device.
 538 program: $(TARGET).hex $(TARGET).eep
 539         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 540
 541 flip: $(TARGET).hex
 542         batchisp -hardware usb -device $(MCU) -operation erase f
 543         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 544         batchisp -hardware usb -device $(MCU) -operation start reset 0
 545
 546 dfu: $(TARGET).hex
 547         dfu-programmer $(MCU) erase
 548         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 549         dfu-programmer $(MCU) reset
 550
 551 flip-ee: $(TARGET).hex $(TARGET).eep
 552         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 553         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 554         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 555         batchisp -hardware usb -device $(MCU) -operation start reset 0
 556         $(REMOVE) $(TARGET)eep.hex
 557
 558 dfu-ee: $(TARGET).hex $(TARGET).eep
 559         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 560         dfu-programmer $(MCU) reset
 561
 562
 563 # Generate avr-gdb config/init file which does the following:
 564 #     define the reset signal, load the target file, connect to target, and set
 565 #     a breakpoint at main().
 566 gdb-config:
 567         @$(REMOVE) $(GDBINIT_FILE)
 568         @echo define reset >> $(GDBINIT_FILE)
 569         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 570         @echo end >> $(GDBINIT_FILE)
 571         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 572         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 573 ifeq ($(DEBUG_BACKEND),simulavr)
 574         @echo load  >> $(GDBINIT_FILE)
 575 endif
 576         @echo break main >> $(GDBINIT_FILE)
 577
 578 debug: gdb-config $(TARGET).elf
 579 ifeq ($(DEBUG_BACKEND), avarice)
 580         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 581         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 582         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 583         @$(WINSHELL) /c pause
 584
 585 else
 586         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 587         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 588 endif
 589         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 590
 591
 592
 593
 594 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 595 COFFCONVERT = $(OBJCOPY) --debugging
 596 COFFCONVERT += --change-section-address .data-0x800000
 597 COFFCONVERT += --change-section-address .bss-0x800000
 598 COFFCONVERT += --change-section-address .noinit-0x800000
 599 COFFCONVERT += --change-section-address .eeprom-0x810000
 600
 601
 602
 603 coff: $(TARGET).elf
 604         @echo
 605         @echo $(MSG_COFF) $(TARGET).cof
 606         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 607
 608
 609 extcoff: $(TARGET).elf
 610         @echo
 611         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 612         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 613
 614
 615
 616 # Create final output files (.hex, .eep) from ELF output file.
 617 %.hex: %.elf
 618         @echo
 619         @echo $(MSG_FLASH) $@
 620         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 621
 622 %.eep: %.elf
 623         @echo
 624         @echo $(MSG_EEPROM) $@
 625         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 626         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 627
 628 # Create extended listing file from ELF output file.
 629 %.lss: %.elf
 630         @echo
 631         @echo $(MSG_EXTENDED_LISTING) $@
 632         $(OBJDUMP) -h -z -S $< > $@
 633
 634 # Create a symbol table from ELF output file.
 635 %.sym: %.elf
 636         @echo
 637         @echo $(MSG_SYMBOL_TABLE) $@
 638         $(NM) -n $< > $@
 639
 640
 641
 642 # Create library from object files.
 643 .SECONDARY : $(TARGET).a
 644 .PRECIOUS : $(OBJ)
 645 %.a: $(OBJ)
 646         @echo
 647         @echo $(MSG_CREATING_LIBRARY) $@
 648         $(AR) $@ $(OBJ)
 649
 650
 651 # Link: create ELF output file from object files.
 652 .SECONDARY : $(TARGET).elf
 653 .PRECIOUS : $(OBJ)
 654 %.elf: $(OBJ)
 655         @echo
 656         @echo $(MSG_LINKING) $@
 657         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 658
 659
 660 # Compile: create object files from C source files.
 661 $(OBJDIR)/%.o : %.c
 662         @echo
 663         @echo $(MSG_COMPILING) $<
 664         $(CC) -c $(ALL_CFLAGS) $< -o $@
 665
 666
 667 # Compile: create object files from C++ source files.
 668 $(OBJDIR)/%.o : %.cpp
 669         @echo
 670         @echo $(MSG_COMPILING_CPP) $<
 671         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 672
 673
 674 # Compile: create assembler files from C source files.
 675 %.s : %.c
 676         $(CC) -S $(ALL_CFLAGS) $< -o $@
 677
 678
 679 # Compile: create assembler files from C++ source files.
 680 %.s : %.cpp
 681         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 682
 683
 684 # Assemble: create object files from assembler source files.
 685 $(OBJDIR)/%.o : %.S
 686         @echo
 687         @echo $(MSG_ASSEMBLING) $<
 688         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 689
 690
 691 # Create preprocessed source for use in sending a bug report.
 692 %.i : %.c
 693         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 694
 695
 696 # Target: clean project.
 697 clean: begin clean_list clean_binary end
 698
 699 clean_binary:
 700         $(REMOVE) $(TARGET).hex
 701
 702 clean_list:
 703         @echo $(MSG_CLEANING)
 704         $(REMOVE) $(TARGET).eep
 705         $(REMOVE) $(TARGET)eep.hex
 706         $(REMOVE) $(TARGET).cof
 707         $(REMOVE) $(TARGET).elf
 708         $(REMOVE) $(TARGET).map
 709         $(REMOVE) $(TARGET).sym
 710         $(REMOVE) $(TARGET).lss
 711         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 712         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 713         $(REMOVE) $(SRC:.c=.s)
 714         $(REMOVE) $(SRC:.c=.d)
 715         $(REMOVE) $(SRC:.c=.i)
 716         $(REMOVE) InvalidEvents.tmp
 717         $(REMOVEDIR) .dep
 718
 719 doxygen:
 720         @echo Generating Project Documentation...
 721         @doxygen Doxygen.conf
 722         @echo Documentation Generation Complete.
 723
 724 clean_doxygen:
 725         rm -rf Documentation
 726
 727 # Create object files directory
 728 $(shell mkdir $(OBJDIR) 2>/dev/null)
 729
 730
 731 # Include the dependency files.
 732 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 733
 734
 735 # Listing of phony targets.
 736 .PHONY : all checkinvalidevents showliboptions    \
 737 showtarget begin finish end sizebefore sizeafter  \
 738 gccversion build elf hex eep lss sym coff extcoff \
 739 program dfu flip flip-ee dfu-ee clean debug       \
 740 clean_list clean_binary gdb-config doxygen