Increase AVRISP command timeout to 240ms up from 150ms to prevent some ISP commands...
[pub/USBasp.git] / Bootloaders / TeensyHID / TeensyHID.txt
1 /** \file
2 *
3 * This file contains special DoxyGen information for the generation of the main page and other special
4 * documentation pages. It is not a project source file.
5 */
6
7 /** \mainpage Teensy HID Class USB AVR Bootloader
8 *
9 * \section SSec_Compat Demo Compatibility:
10 *
11 * The following table indicates what microcontrollers are compatible with this demo.
12 *
13 * - AT90USB646
14 * - AT90USB162
15 *
16 * \section SSec_Info USB Information:
17 *
18 * The following table gives a rundown of the USB utilization of this demo.
19 *
20 * <table>
21 * <tr>
22 * <td><b>USB Mode:</b></td>
23 * <td>Device</td>
24 * </tr>
25 * <tr>
26 * <td><b>USB Class:</b></td>
27 * <td>Human Interface Device Class (HID)</td>
28 * </tr>
29 * <tr>
30 * <td><b>USB Subclass:</b></td>
31 * <td>N/A</td>
32 * </tr>
33 * <tr>
34 * <td><b>Relevant Standards:</b></td>
35 * <td>USBIF HID Class Standard</td>
36 * <td>Teensy Programming Protocol Details</td>
37 * </tr>
38 * <tr>
39 * <td><b>Usable Speeds:</b></td>
40 * <td>Low Speed Mode</td>
41 * <td>Full Speed Mode</td>
42 * </tr>
43 * </table>
44 *
45 * \section SSec_Description Project Description:
46 *
47 * This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming
48 * software to load firmware onto the AVR, such as the official software at http://www.pjrc.com/teensy/.
49 *
50 * Out of the box this bootloader builds for the AT90USB162, and will fit into 4KB of bootloader space.
51 *
52 * This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains
53 * compatible with no changes.
54 *
55 * \section SSec_Options Project Options
56 *
57 * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
58 *
59 * <table>
60 * <tr>
61 * <td>
62 * None
63 * </td>
64 * </tr>
65 * </table>
66 */