Projects/XPLAINBridge/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = XPLAIN
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = XPLAINBridge
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../..
 116
 117
 118 # Path to the LUFA AVRISP-MKII project
 119 AVRISP_PATH = ../AVRISP-MKII
 120
 121
 122 # LUFA library compile-time options and predefined tokens
 123 LUFA_OPTS  = -D USB_DEVICE_ONLY
 124 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 125 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 126 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 127 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 128 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 129 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 130 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 131
 132 LUFA_OPTS += -D AUX_LINE_PORT=PORTB
 133 LUFA_OPTS += -D AUX_LINE_PIN=PINB
 134 LUFA_OPTS += -D AUX_LINE_DDR=DDRB
 135 LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
 136 LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
 137 LUFA_OPTS += -D VTARGET_REF_VOLTS=3.3
 138 LUFA_OPTS += -D VTARGET_SCALE_FACTOR=2
 139 #LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
 140
 141
 142 # Create the LUFA source path variables by including the LUFA root makefile
 143 include $(LUFA_PATH)/LUFA/makefile
 144
 145
 146 # List C source files here. (C dependencies are automatically generated.)
 147 SRC = $(TARGET).c                                                 \
 148           AVRISPDescriptors.c                                         \
 149           USARTDescriptors.c                                          \
 150           Lib/SoftUART.c                                              \
 151           $(AVRISP_PATH)/Lib/V2Protocol.c                             \
 152           $(AVRISP_PATH)/Lib/V2ProtocolParams.c                       \
 153           $(AVRISP_PATH)/Lib/ISP/ISPProtocol.c                        \
 154           $(AVRISP_PATH)/Lib/ISP/ISPTarget.c                          \
 155           $(AVRISP_PATH)/Lib/XPROG/XPROGProtocol.c                    \
 156           $(AVRISP_PATH)/Lib/XPROG/XPROGTarget.c                      \
 157           $(AVRISP_PATH)/Lib/XPROG/XMEGANVM.c                         \
 158           $(AVRISP_PATH)/Lib/XPROG/TINYNVM.c                          \
 159           $(LUFA_SRC_USB)                                             \
 160           $(LUFA_SRC_USBCLASS)
 161
 162
 163 # List C++ source files here. (C dependencies are automatically generated.)
 164 CPPSRC =
 165
 166
 167 # List Assembler source files here.
 168 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 169 #     will not be considered source files but generated files (assembler
 170 #     output from the compiler), and will be deleted upon "make clean"!
 171 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 172 #     it will preserve the spelling of the filenames, and gcc itself does
 173 #     care about how the name is spelled on its command-line.
 174 ASRC =
 175
 176
 177 # Optimization level, can be [0, 1, 2, 3, s].
 178 #     0 = turn off optimization. s = optimize for size.
 179 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 180 OPT = s
 181
 182
 183 # Debugging format.
 184 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 185 #     AVR Studio 4.10 requires dwarf-2.
 186 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 187 DEBUG = dwarf-2
 188
 189
 190 # List any extra directories to look for include files here.
 191 #     Each directory must be seperated by a space.
 192 #     Use forward slashes for directory separators.
 193 #     For a directory that has spaces, enclose it in quotes.
 194 EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/
 195
 196
 197 # Compiler flag to set the C Standard level.
 198 #     c89   = "ANSI" C
 199 #     gnu89 = c89 plus GCC extensions
 200 #     c99   = ISO C99 standard (not yet fully implemented)
 201 #     gnu99 = c99 plus GCC extensions
 202 CSTANDARD = -std=c99
 203
 204
 205 # Place -D or -U options here for C sources
 206 CDEFS  = -DF_CPU=$(F_CPU)UL
 207 CDEFS += -DF_CLOCK=$(F_CLOCK)UL
 208 CDEFS += -DBOARD=BOARD_$(BOARD)
 209 CDEFS += $(LUFA_OPTS)
 210
 211
 212 # Place -D or -U options here for ASM sources
 213 ADEFS  = -DF_CPU=$(F_CPU)
 214 ADEFS += -DF_CLOCK=$(F_CLOCK)UL
 215 ADEFS += -DBOARD=BOARD_$(BOARD)
 216 ADEFS += $(LUFA_OPTS)
 217
 218 # Place -D or -U options here for C++ sources
 219 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 220 CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
 221 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 222 CPPDEFS += $(LUFA_OPTS)
 223 #CPPDEFS += -D__STDC_LIMIT_MACROS
 224 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 225
 226
 227
 228 #---------------- Compiler Options C ----------------
 229 #  -g*:          generate debugging information
 230 #  -O*:          optimization level
 231 #  -f...:        tuning, see GCC manual and avr-libc documentation
 232 #  -Wall...:     warning level
 233 #  -Wa,...:      tell GCC to pass this to the assembler.
 234 #    -adhlns...: create assembler listing
 235 CFLAGS = -g$(DEBUG)
 236 CFLAGS += $(CDEFS)
 237 CFLAGS += -O$(OPT)
 238 CFLAGS += -funsigned-char
 239 CFLAGS += -funsigned-bitfields
 240 CFLAGS += -ffunction-sections
 241 CFLAGS += -fno-inline-small-functions
 242 CFLAGS += -fpack-struct
 243 CFLAGS += -fshort-enums
 244 CFLAGS += -fno-strict-aliasing
 245 CFLAGS += -Wall
 246 CFLAGS += -Wstrict-prototypes
 247 #CFLAGS += -mshort-calls
 248 #CFLAGS += -fno-unit-at-a-time
 249 #CFLAGS += -Wundef
 250 #CFLAGS += -Wunreachable-code
 251 #CFLAGS += -Wsign-compare
 252 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 253 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 254 CFLAGS += $(CSTANDARD)
 255
 256
 257 #---------------- Compiler Options C++ ----------------
 258 #  -g*:          generate debugging information
 259 #  -O*:          optimization level
 260 #  -f...:        tuning, see GCC manual and avr-libc documentation
 261 #  -Wall...:     warning level
 262 #  -Wa,...:      tell GCC to pass this to the assembler.
 263 #    -adhlns...: create assembler listing
 264 CPPFLAGS = -g$(DEBUG)
 265 CPPFLAGS += $(CPPDEFS)
 266 CPPFLAGS += -O$(OPT)
 267 CPPFLAGS += -funsigned-char
 268 CPPFLAGS += -funsigned-bitfields
 269 CPPFLAGS += -fpack-struct
 270 CPPFLAGS += -fshort-enums
 271 CPPFLAGS += -fno-exceptions
 272 CPPFLAGS += -Wall
 273 CPPFLAGS += -Wundef
 274 #CPPFLAGS += -mshort-calls
 275 #CPPFLAGS += -fno-unit-at-a-time
 276 #CPPFLAGS += -Wstrict-prototypes
 277 #CPPFLAGS += -Wunreachable-code
 278 #CPPFLAGS += -Wsign-compare
 279 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 280 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 281 #CPPFLAGS += $(CSTANDARD)
 282
 283
 284 #---------------- Assembler Options ----------------
 285 #  -Wa,...:   tell GCC to pass this to the assembler.
 286 #  -adhlns:   create listing
 287 #  -gstabs:   have the assembler create line number information; note that
 288 #             for use in COFF files, additional information about filenames
 289 #             and function names needs to be present in the assembler source
 290 #             files -- see avr-libc docs [FIXME: not yet described there]
 291 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 292 #       dump that will be displayed for a given single line of source input.
 293 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 294
 295
 296 #---------------- Library Options ----------------
 297 # Minimalistic printf version
 298 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 299
 300 # Floating point printf version (requires MATH_LIB = -lm below)
 301 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 302
 303 # If this is left blank, then it will use the Standard printf version.
 304 PRINTF_LIB =
 305 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 306 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 307
 308
 309 # Minimalistic scanf version
 310 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 311
 312 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 313 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 314
 315 # If this is left blank, then it will use the Standard scanf version.
 316 SCANF_LIB =
 317 #SCANF_LIB = $(SCANF_LIB_MIN)
 318 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 319
 320
 321 MATH_LIB = -lm
 322
 323
 324 # List any extra directories to look for libraries here.
 325 #     Each directory must be seperated by a space.
 326 #     Use forward slashes for directory separators.
 327 #     For a directory that has spaces, enclose it in quotes.
 328 EXTRALIBDIRS =
 329
 330
 331
 332 #---------------- External Memory Options ----------------
 333
 334 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 335 # used for variables (.data/.bss) and heap (malloc()).
 336 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 337
 338 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 339 # only used for heap (malloc()).
 340 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 341
 342 EXTMEMOPTS =
 343
 344
 345
 346 #---------------- Linker Options ----------------
 347 #  -Wl,...:     tell GCC to pass this to linker.
 348 #    -Map:      create map file
 349 #    --cref:    add cross reference to  map file
 350 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 351 LDFLAGS += -Wl,--relax
 352 LDFLAGS += -Wl,--gc-sections
 353 LDFLAGS += $(EXTMEMOPTS)
 354 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 355 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 356 #LDFLAGS += -T linker_script.x
 357
 358
 359
 360 #---------------- Programming Options (avrdude) ----------------
 361
 362 # Programming hardware
 363 # Type: avrdude -c ?
 364 # to get a full listing.
 365 #
 366 AVRDUDE_PROGRAMMER = jtagmkII
 367
 368 # com1 = serial port. Use lpt1 to connect to parallel port.
 369 AVRDUDE_PORT = usb
 370
 371 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 372 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 373
 374
 375 # Uncomment the following if you want avrdude's erase cycle counter.
 376 # Note that this counter needs to be initialized first using -Yn,
 377 # see avrdude manual.
 378 #AVRDUDE_ERASE_COUNTER = -y
 379
 380 # Uncomment the following if you do /not/ wish a verification to be
 381 # performed after programming the device.
 382 #AVRDUDE_NO_VERIFY = -V
 383
 384 # Increase verbosity level.  Please use this when submitting bug
 385 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 386 # to submit bug reports.
 387 #AVRDUDE_VERBOSE = -v -v
 388
 389 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 390 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 391 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 392 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 393
 394
 395
 396 #---------------- Debugging Options ----------------
 397
 398 # For simulavr only - target MCU frequency.
 399 DEBUG_MFREQ = $(F_CPU)
 400
 401 # Set the DEBUG_UI to either gdb or insight.
 402 # DEBUG_UI = gdb
 403 DEBUG_UI = insight
 404
 405 # Set the debugging back-end to either avarice, simulavr.
 406 DEBUG_BACKEND = avarice
 407 #DEBUG_BACKEND = simulavr
 408
 409 # GDB Init Filename.
 410 GDBINIT_FILE = __avr_gdbinit
 411
 412 # When using avarice settings for the JTAG
 413 JTAG_DEV = /dev/com1
 414
 415 # Debugging port used to communicate between GDB / avarice / simulavr.
 416 DEBUG_PORT = 4242
 417
 418 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 419 #     just set to localhost unless doing some sort of crazy debugging when
 420 #     avarice is running on a different computer.
 421 DEBUG_HOST = localhost
 422
 423
 424
 425 #============================================================================
 426
 427
 428 # Define programs and commands.
 429 SHELL = sh
 430 CC = avr-gcc
 431 OBJCOPY = avr-objcopy
 432 OBJDUMP = avr-objdump
 433 SIZE = avr-size
 434 AR = avr-ar rcs
 435 NM = avr-nm
 436 AVRDUDE = avrdude
 437 REMOVE = rm -f
 438 REMOVEDIR = rm -rf
 439 COPY = cp
 440 WINSHELL = cmd
 441
 442
 443 # Define Messages
 444 # English
 445 MSG_ERRORS_NONE = Errors: none
 446 MSG_BEGIN = -------- begin --------
 447 MSG_END = --------  end  --------
 448 MSG_SIZE_BEFORE = Size before:
 449 MSG_SIZE_AFTER = Size after:
 450 MSG_COFF = Converting to AVR COFF:
 451 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 452 MSG_FLASH = Creating load file for Flash:
 453 MSG_EEPROM = Creating load file for EEPROM:
 454 MSG_EXTENDED_LISTING = Creating Extended Listing:
 455 MSG_SYMBOL_TABLE = Creating Symbol Table:
 456 MSG_LINKING = Linking:
 457 MSG_COMPILING = Compiling C:
 458 MSG_COMPILING_CPP = Compiling C++:
 459 MSG_ASSEMBLING = Assembling:
 460 MSG_CLEANING = Cleaning project:
 461 MSG_CREATING_LIBRARY = Creating library:
 462
 463
 464
 465
 466 # Define all object files.
 467 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 468
 469 # Define all listing files.
 470 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 471
 472
 473 # Compiler flags to generate dependency files.
 474 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 475
 476
 477 # Combine all necessary flags and optional flags.
 478 # Add target processor to flags.
 479 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 480 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 481 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 482
 483
 484
 485
 486
 487 # Default target.
 488 all: begin gccversion sizebefore build sizeafter end
 489
 490 # Change the build target to build a HEX file or a library.
 491 build: elf hex eep lss sym
 492 #build: lib
 493
 494
 495 elf: $(TARGET).elf
 496 hex: $(TARGET).hex
 497 eep: $(TARGET).eep
 498 lss: $(TARGET).lss
 499 sym: $(TARGET).sym
 500 LIBNAME=lib$(TARGET).a
 501 lib: $(LIBNAME)
 502
 503
 504
 505 # Eye candy.
 506 # AVR Studio 3.x does not check make's exit code but relies on
 507 # the following magic strings to be generated by the compile job.
 508 begin:
 509         @echo
 510         @echo $(MSG_BEGIN)
 511
 512 end:
 513         @echo $(MSG_END)
 514         @echo
 515
 516
 517 # Display size of file.
 518 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 519 ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
 520
 521 sizebefore:
 522         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 523         2>/dev/null; echo; fi
 524
 525 sizeafter:
 526         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 527         2>/dev/null; echo; fi
 528
 529
 530
 531 # Display compiler version information.
 532 gccversion :
 533         @$(CC) --version
 534
 535
 536 # Program the device.
 537 program: $(TARGET).hex $(TARGET).eep
 538         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 539
 540 flip: $(TARGET).hex
 541         batchisp -hardware usb -device $(MCU) -operation erase f
 542         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 543         batchisp -hardware usb -device $(MCU) -operation start reset 0
 544
 545 dfu: $(TARGET).hex
 546         dfu-programmer $(MCU) erase
 547         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 548         dfu-programmer $(MCU) reset
 549
 550 flip-ee: $(TARGET).hex $(TARGET).eep
 551         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 552         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 553         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 554         batchisp -hardware usb -device $(MCU) -operation start reset 0
 555         $(REMOVE) $(TARGET)eep.hex
 556
 557 dfu-ee: $(TARGET).hex $(TARGET).eep
 558         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 559         dfu-programmer $(MCU) reset
 560
 561
 562 # Generate avr-gdb config/init file which does the following:
 563 #     define the reset signal, load the target file, connect to target, and set
 564 #     a breakpoint at main().
 565 gdb-config:
 566         @$(REMOVE) $(GDBINIT_FILE)
 567         @echo define reset >> $(GDBINIT_FILE)
 568         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 569         @echo end >> $(GDBINIT_FILE)
 570         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 571         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 572 ifeq ($(DEBUG_BACKEND),simulavr)
 573         @echo load  >> $(GDBINIT_FILE)
 574 endif
 575         @echo break main >> $(GDBINIT_FILE)
 576
 577 debug: gdb-config $(TARGET).elf
 578 ifeq ($(DEBUG_BACKEND), avarice)
 579         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 580         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 581         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 582         @$(WINSHELL) /c pause
 583
 584 else
 585         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 586         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 587 endif
 588         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 589
 590
 591
 592
 593 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 594 COFFCONVERT = $(OBJCOPY) --debugging
 595 COFFCONVERT += --change-section-address .data-0x800000
 596 COFFCONVERT += --change-section-address .bss-0x800000
 597 COFFCONVERT += --change-section-address .noinit-0x800000
 598 COFFCONVERT += --change-section-address .eeprom-0x810000
 599
 600
 601
 602 coff: $(TARGET).elf
 603         @echo
 604         @echo $(MSG_COFF) $(TARGET).cof
 605         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 606
 607
 608 extcoff: $(TARGET).elf
 609         @echo
 610         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 611         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 612
 613
 614
 615 # Create final output files (.hex, .eep) from ELF output file.
 616 %.hex: %.elf
 617         @echo
 618         @echo $(MSG_FLASH) $@
 619         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 620
 621 %.eep: %.elf
 622         @echo
 623         @echo $(MSG_EEPROM) $@
 624         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 625         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 626
 627 # Create extended listing file from ELF output file.
 628 %.lss: %.elf
 629         @echo
 630         @echo $(MSG_EXTENDED_LISTING) $@
 631         $(OBJDUMP) -h -S -z $< > $@
 632
 633 # Create a symbol table from ELF output file.
 634 %.sym: %.elf
 635         @echo
 636         @echo $(MSG_SYMBOL_TABLE) $@
 637         $(NM) -n $< > $@
 638
 639
 640
 641 # Create library from object files.
 642 .SECONDARY : $(TARGET).a
 643 .PRECIOUS : $(OBJ)
 644 %.a: $(OBJ)
 645         @echo
 646         @echo $(MSG_CREATING_LIBRARY) $@
 647         $(AR) $@ $(OBJ)
 648
 649
 650 # Link: create ELF output file from object files.
 651 .SECONDARY : $(TARGET).elf
 652 .PRECIOUS : $(OBJ)
 653 %.elf: $(OBJ)
 654         @echo
 655         @echo $(MSG_LINKING) $@
 656         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 657
 658
 659 # Compile: create object files from C source files.
 660 $(OBJDIR)/%.o : %.c
 661         @echo
 662         @echo $(MSG_COMPILING) $<
 663         $(CC) -c $(ALL_CFLAGS) $< -o $@
 664
 665
 666 # Compile: create object files from C++ source files.
 667 $(OBJDIR)/%.o : %.cpp
 668         @echo
 669         @echo $(MSG_COMPILING_CPP) $<
 670         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 671
 672
 673 # Compile: create assembler files from C source files.
 674 %.s : %.c
 675         $(CC) -S $(ALL_CFLAGS) $< -o $@
 676
 677
 678 # Compile: create assembler files from C++ source files.
 679 %.s : %.cpp
 680         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 681
 682
 683 # Assemble: create object files from assembler source files.
 684 $(OBJDIR)/%.o : %.S
 685         @echo
 686         @echo $(MSG_ASSEMBLING) $<
 687         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 688
 689
 690 # Create preprocessed source for use in sending a bug report.
 691 %.i : %.c
 692         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 693
 694
 695 # Target: clean project.
 696 clean: begin clean_list end
 697
 698 clean_list :
 699         @echo
 700         @echo $(MSG_CLEANING)
 701         $(REMOVE) $(TARGET).hex
 702         $(REMOVE) $(TARGET).eep
 703         $(REMOVE) $(TARGET).cof
 704         $(REMOVE) $(TARGET).elf
 705         $(REMOVE) $(TARGET).map
 706         $(REMOVE) $(TARGET).sym
 707         $(REMOVE) $(TARGET).lss
 708         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 709         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 710         $(REMOVE) $(SRC:.c=.s)
 711         $(REMOVE) $(SRC:.c=.d)
 712         $(REMOVE) $(SRC:.c=.i)
 713         $(REMOVEDIR) .dep
 714
 715 doxygen:
 716         @echo Generating Project Documentation...
 717         @doxygen Doxygen.conf
 718         @echo Documentation Generation Complete.
 719
 720 clean_doxygen:
 721         rm -rf Documentation
 722
 723 # Create object files directory
 724 $(shell mkdir $(OBJDIR) 2>/dev/null)
 725
 726
 727 # Include the dependency files.
 728 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 729
 730
 731 # Listing of phony targets.
 732 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 733 build elf hex eep lss sym coff extcoff doxygen clean          \
 734 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 735 debug gdb-config