Reintegrate the FullEPAddresses development branch into trunk.
[pub/USBasp.git] / LUFA / Drivers / USB / Core / USBMode.h
1 /*
2 LUFA Library
3 Copyright (C) Dean Camera, 2012.
4
5 dean [at] fourwalledcubicle [dot] com
6 www.lufa-lib.org
7 */
8
9 /*
10 Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
11
12 Permission to use, copy, modify, distribute, and sell this
13 software and its documentation for any purpose is hereby granted
14 without fee, provided that the above copyright notice appear in
15 all copies and that both that the copyright notice and this
16 permission notice and warranty disclaimer appear in supporting
17 documentation, and that the name of the author not be used in
18 advertising or publicity pertaining to distribution of the
19 software without specific, written prior permission.
20
21 The author disclaim all warranties with regard to this
22 software, including all implied warranties of merchantability
23 and fitness. In no event shall the author be liable for any
24 special, indirect or consequential damages or any damages
25 whatsoever resulting from loss of use, data or profits, whether
26 in an action of contract, negligence or other tortious action,
27 arising out of or in connection with the use or performance of
28 this software.
29 */
30
31 /** \file
32 * \brief USB mode and feature support definitions.
33 * \copydetails Group_USBMode
34 *
35 * \note This file should not be included directly. It is automatically included as needed by the USB driver
36 * dispatch header located in LUFA/Drivers/USB/USB.h.
37 */
38
39 /** \ingroup Group_USB
40 * \defgroup Group_USBMode USB Mode Tokens
41 * \brief USB mode and feature support definitions.
42 *
43 * This file defines macros indicating the type of USB controller the library is being compiled for, and its
44 * capabilities. These macros may then be referenced in the user application to selectively enable or disable
45 * code sections depending on if they are defined or not.
46 *
47 * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to
48 * allow the user code to conditionally enable or disable code based on the USB controller family and allowable
49 * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for
50 * the given compilation.
51 *
52 * @{
53 */
54
55 #ifndef __USBMODE_H__
56 #define __USBMODE_H__
57
58 /* Enable C linkage for C++ Compilers: */
59 #if defined(__cplusplus)
60 extern "C" {
61 #endif
62
63 /* Preprocessor Checks: */
64 #if !defined(__INCLUDE_FROM_USB_DRIVER)
65 #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
66 #endif
67
68 /* Public Interface - May be used in end-application: */
69 #if defined(__DOXYGEN__)
70 /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller
71 * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.
72 */
73 #define USB_SERIES_2_AVR
74
75 /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller
76 * (i.e. ATMEGAxxU4) when defined.
77 */
78 #define USB_SERIES_4_AVR
79
80 /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller
81 * (i.e. AT90USBxxx6) when defined.
82 */
83 #define USB_SERIES_6_AVR
84
85 /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller
86 * (i.e. AT90USBxxx7) when defined.
87 */
88 #define USB_SERIES_7_AVR
89
90 /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller
91 * (i.e. AT32UC3A0*) when defined.
92 */
93 #define USB_SERIES_UC3A0_AVR
94
95 /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller
96 * (i.e. AT32UC3A1*) when defined.
97 */
98 #define USB_SERIES_UC3A1_AVR
99
100 /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller
101 * (i.e. AT32UC3A3*) when defined.
102 */
103 #define USB_SERIES_UC3A3_AVR
104
105 /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller
106 * (i.e. AT32UC3B0*) when defined.
107 */
108 #define USB_SERIES_UC3B0_AVR
109
110 /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller
111 * (i.e. AT32UC3B1*) when defined.
112 */
113 #define USB_SERIES_UC3B1_AVR
114
115 /** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller
116 * (i.e. ATXMEGA*A1U) when defined.
117 */
118 #define USB_SERIES_A1U_XMEGA
119
120 /** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller
121 * (i.e. ATXMEGA*A3U) when defined.
122 */
123 #define USB_SERIES_A3U_XMEGA
124
125 /** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller
126 * (i.e. ATXMEGA*A4U) when defined.
127 */
128 #define USB_SERIES_A4U_XMEGA
129
130 /** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller
131 * (i.e. ATXMEGA*B1) when defined.
132 */
133 #define USB_SERIES_B1_XMEGA
134
135 /** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller
136 * (i.e. ATXMEGA*B3) when defined.
137 */
138 #define USB_SERIES_B3_XMEGA
139
140 /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller
141 * (i.e. ATXMEGA*C3) when defined.
142 */
143 #define USB_SERIES_C3_XMEGA
144
145 /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller
146 * (i.e. ATXMEGA*C4) when defined.
147 */
148 #define USB_SERIES_C4_XMEGA
149
150 /** Indicates that the target microcontroller and compilation settings allow for the
151 * target to be configured in USB Device mode when defined.
152 */
153 #define USB_CAN_BE_DEVICE
154
155 /** Indicates that the target microcontroller and compilation settings allow for the
156 * target to be configured in USB Host mode when defined.
157 */
158 #define USB_CAN_BE_HOST
159
160 /** Indicates that the target microcontroller and compilation settings allow for the
161 * target to be configured in either USB Device or Host mode when defined.
162 */
163 #define USB_CAN_BE_BOTH
164 #else
165 /* Macros: */
166 #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \
167 defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
168 #define USB_SERIES_2_AVR
169 #define USB_CAN_BE_DEVICE
170 #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
171 #define USB_SERIES_4_AVR
172 #define USB_CAN_BE_DEVICE
173 #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
174 #define USB_SERIES_6_AVR
175 #define USB_CAN_BE_DEVICE
176 #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
177 #define USB_SERIES_7_AVR
178 #define USB_CAN_BE_DEVICE
179 #define USB_CAN_BE_HOST
180 #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \
181 defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__))
182 #define USB_SERIES_UC3A0_AVR32
183 #define USB_CAN_BE_DEVICE
184 #define USB_CAN_BE_HOST
185 #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \
186 defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__))
187 #define USB_SERIES_UC3A1_AVR32
188 #define USB_CAN_BE_DEVICE
189 #define USB_CAN_BE_HOST
190 #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \
191 defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \
192 defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__))
193 #define USB_SERIES_UC3A3_AVR32
194 #define USB_CAN_BE_DEVICE
195 #define USB_CAN_BE_HOST
196 #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \
197 defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \
198 defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__))
199 #define USB_SERIES_UC3A4_AVR32
200 #define USB_CAN_BE_DEVICE
201 #define USB_CAN_BE_HOST
202 #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \
203 defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__))
204 #define USB_SERIES_UC3B0_AVR32
205 #define USB_CAN_BE_DEVICE
206 #define USB_CAN_BE_HOST
207 #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \
208 defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__))
209 #define USB_SERIES_UC3B1_AVR32
210 #define USB_CAN_BE_DEVICE
211 #define USB_CAN_BE_HOST
212 #elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__))
213 #define USB_SERIES_A1U_XMEGA
214 #define USB_CAN_BE_DEVICE
215 #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \
216 defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__))
217 #define USB_SERIES_A3U_XMEGA
218 #define USB_CAN_BE_DEVICE
219 #elif (defined(__AVR_ATxmega256A3BU__))
220 #define USB_SERIES_A3BU_XMEGA
221 #define USB_CAN_BE_DEVICE
222 #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \
223 defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__))
224 #define USB_SERIES_A4U_XMEGA
225 #define USB_CAN_BE_DEVICE
226 #elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__))
227 #define USB_SERIES_B1_XMEGA
228 #define USB_CAN_BE_DEVICE
229 #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__))
230 #define USB_SERIES_B3_XMEGA
231 #define USB_CAN_BE_DEVICE
232 #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \
233 defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__))
234 #define USB_SERIES_C3_XMEGA
235 #define USB_CAN_BE_DEVICE
236 #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__))
237 #define USB_SERIES_C4_XMEGA
238 #define USB_CAN_BE_DEVICE
239 #endif
240
241 #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST))
242 #define USB_CAN_BE_BOTH
243 #endif
244
245 #if defined(USB_HOST_ONLY)
246 #if !defined(USB_CAN_BE_HOST)
247 #error USB_HOST_ONLY is not available for the currently selected microcontroller model.
248 #else
249 #undef USB_CAN_BE_DEVICE
250 #undef USB_CAN_BE_BOTH
251 #endif
252 #endif
253
254 #if defined(USB_DEVICE_ONLY)
255 #if !defined(USB_CAN_BE_DEVICE)
256 #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model.
257 #else
258 #undef USB_CAN_BE_HOST
259 #undef USB_CAN_BE_BOTH
260 #endif
261 #endif
262
263 #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
264 #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
265 #endif
266
267 #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST))
268 #error The currently selected device or architecture is not supported under the USB component of the library.
269 #endif
270 #endif
271
272 /* Disable C linkage for C++ Compilers: */
273 #if defined(__cplusplus)
274 }
275 #endif
276
277 #endif
278
279 /** @} */
280