Projects/AVRISP-MKII/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency in Hz. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #
  78 #     This will be an integer division of F_CLOCK below, as it is sourced by
  79 #     F_CLOCK after it has run through any CPU prescalers. Note that this value
  80 #     does not *change* the processor frequency - it should merely be updated to
  81 #     reflect the processor speed set externally so that the code can use accurate
  82 #     software delays.
  83 F_CPU = 8000000
  84
  85
  86 # Input clock frequency.
  87 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  88 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  89 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  90 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  91 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  92 #     at the end, this will be done automatically to create a 32-bit value in your
  93 #     source code.
  94 #
  95 #     If no clock division is performed on the input clock inside the AVR (via the
  96 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  97 F_CLOCK = $(F_CPU)
  98
  99
 100 # Output format. (can be srec, ihex, binary)
 101 FORMAT = ihex
 102
 103
 104 # Target file name (without extension).
 105 TARGET = AVRISP-MKII
 106
 107
 108 # Object files directory
 109 #     To put object files in current directory, use a dot (.), do NOT make
 110 #     this an empty or blank macro!
 111 OBJDIR = .
 112
 113
 114 # Path to the LUFA library
 115 LUFA_PATH = ../../
 116
 117
 118 # LUFA library compile-time options
 119 LUFA_OPTS  = -D USB_DEVICE_ONLY
 120 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
 121 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 122 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 123 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 124 LUFA_OPTS += -D NO_INTERNAL_SERIAL
 125 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 126 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 127 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 128
 129 # List C source files here. (C dependencies are automatically generated.)
 130 SRC = $(TARGET).c                                                 \
 131           Descriptors.c                                               \
 132           Lib/V2Protocol.c                                            \
 133           Lib/V2ProtocolParams.c                                      \
 134           Lib/ISP/ISPProtocol.c                                       \
 135           Lib/ISP/ISPTarget.c                                         \
 136           Lib/XPROG/XPROGProtocol.c                                   \
 137           Lib/XPROG/XPROGTarget.c                                     \
 138           Lib/XPROG/XMEGANVM.c                                        \
 139           Lib/XPROG/TINYNVM.c                                         \
 140           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 141           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c             \
 142           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 143           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 144           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 145           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 146           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 147           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 151
 152
 153 # List C++ source files here. (C dependencies are automatically generated.)
 154 CPPSRC =
 155
 156
 157 # List Assembler source files here.
 158 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 159 #     will not be considered source files but generated files (assembler
 160 #     output from the compiler), and will be deleted upon "make clean"!
 161 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 162 #     it will preserve the spelling of the filenames, and gcc itself does
 163 #     care about how the name is spelled on its command-line.
 164 ASRC =
 165
 166
 167 # Optimization level, can be [0, 1, 2, 3, s].
 168 #     0 = turn off optimization. s = optimize for size.
 169 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 170 OPT = s
 171
 172
 173 # Debugging format.
 174 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 175 #     AVR Studio 4.10 requires dwarf-2.
 176 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 177 DEBUG = dwarf-2
 178
 179
 180 # List any extra directories to look for include files here.
 181 #     Each directory must be seperated by a space.
 182 #     Use forward slashes for directory separators.
 183 #     For a directory that has spaces, enclose it in quotes.
 184 EXTRAINCDIRS = $(LUFA_PATH)/
 185
 186
 187 # Compiler flag to set the C Standard level.
 188 #     c89   = "ANSI" C
 189 #     gnu89 = c89 plus GCC extensions
 190 #     c99   = ISO C99 standard (not yet fully implemented)
 191 #     gnu99 = c99 plus GCC extensions
 192 CSTANDARD = -std=c99
 193
 194
 195 # Place -D or -U options here for C sources
 196 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 197 CDEFS += -DAUX_LINE_PORT=PORTB
 198 CDEFS += -DAUX_LINE_PIN=PINB
 199 CDEFS += -DAUX_LINE_DDR=DDRB
 200 CDEFS += -DAUX_LINE_MASK="(1 << 4)"
 201 CDEFS += -DENABLE_ISP_PROTOCOL
 202 CDEFS += -DENABLE_XPROG_PROTOCOL
 203 CDEFS += -DVTARGET_ADC_CHANNEL=2
 204 CDEFS += -DVTARGET_REF_VOLTS=5
 205 CDEFS += -DVTARGET_SCALE_FACTOR=1
 206 #CDEFS += -DNO_VTARGET_DETECT
 207 #CDEFS += -DLIBUSB_DRIVER_COMPAT
 208
 209
 210 # Place -D or -U options here for ASM sources
 211 ADEFS = -DF_CPU=$(F_CPU)
 212
 213
 214 # Place -D or -U options here for C++ sources
 215 CPPDEFS = -DF_CPU=$(F_CPU)UL
 216 #CPPDEFS += -D__STDC_LIMIT_MACROS
 217 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 218
 219
 220
 221 #---------------- Compiler Options C ----------------
 222 #  -g*:          generate debugging information
 223 #  -O*:          optimization level
 224 #  -f...:        tuning, see GCC manual and avr-libc documentation
 225 #  -Wall...:     warning level
 226 #  -Wa,...:      tell GCC to pass this to the assembler.
 227 #    -adhlns...: create assembler listing
 228 CFLAGS = -g$(DEBUG)
 229 CFLAGS += $(CDEFS)
 230 CFLAGS += -O$(OPT)
 231 CFLAGS += -funsigned-char
 232 CFLAGS += -funsigned-bitfields
 233 CFLAGS += -ffunction-sections
 234 CFLAGS += -fno-inline-small-functions
 235 CFLAGS += -fpack-struct
 236 CFLAGS += -fshort-enums
 237 CFLAGS += -fno-strict-aliasing
 238 CFLAGS += -Wall
 239 CFLAGS += -Wstrict-prototypes
 240 CFLAGS += -Wundef
 241 #CFLAGS += -fno-unit-at-a-time
 242 #CFLAGS += -Wunreachable-code
 243 #CFLAGS += -Wsign-compare
 244 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 245 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 246 CFLAGS += $(CSTANDARD)
 247
 248
 249 #---------------- Compiler Options C++ ----------------
 250 #  -g*:          generate debugging information
 251 #  -O*:          optimization level
 252 #  -f...:        tuning, see GCC manual and avr-libc documentation
 253 #  -Wall...:     warning level
 254 #  -Wa,...:      tell GCC to pass this to the assembler.
 255 #    -adhlns...: create assembler listing
 256 CPPFLAGS = -g$(DEBUG)
 257 CPPFLAGS += $(CPPDEFS)
 258 CPPFLAGS += -O$(OPT)
 259 CPPFLAGS += -funsigned-char
 260 CPPFLAGS += -funsigned-bitfields
 261 CPPFLAGS += -fpack-struct
 262 CPPFLAGS += -fshort-enums
 263 CPPFLAGS += -fno-exceptions
 264 CPPFLAGS += -Wall
 265 CFLAGS += -Wundef
 266 #CPPFLAGS += -mshort-calls
 267 #CPPFLAGS += -fno-unit-at-a-time
 268 #CPPFLAGS += -Wstrict-prototypes
 269 #CPPFLAGS += -Wunreachable-code
 270 #CPPFLAGS += -Wsign-compare
 271 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 272 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 273 #CPPFLAGS += $(CSTANDARD)
 274
 275
 276 #---------------- Assembler Options ----------------
 277 #  -Wa,...:   tell GCC to pass this to the assembler.
 278 #  -adhlns:   create listing
 279 #  -gstabs:   have the assembler create line number information; note that
 280 #             for use in COFF files, additional information about filenames
 281 #             and function names needs to be present in the assembler source
 282 #             files -- see avr-libc docs [FIXME: not yet described there]
 283 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 284 #       dump that will be displayed for a given single line of source input.
 285 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 286
 287
 288 #---------------- Library Options ----------------
 289 # Minimalistic printf version
 290 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 291
 292 # Floating point printf version (requires MATH_LIB = -lm below)
 293 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 294
 295 # If this is left blank, then it will use the Standard printf version.
 296 PRINTF_LIB =
 297 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 298 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 299
 300
 301 # Minimalistic scanf version
 302 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 303
 304 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 305 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 306
 307 # If this is left blank, then it will use the Standard scanf version.
 308 SCANF_LIB =
 309 #SCANF_LIB = $(SCANF_LIB_MIN)
 310 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 311
 312
 313 MATH_LIB = -lm
 314
 315
 316 # List any extra directories to look for libraries here.
 317 #     Each directory must be seperated by a space.
 318 #     Use forward slashes for directory separators.
 319 #     For a directory that has spaces, enclose it in quotes.
 320 EXTRALIBDIRS =
 321
 322
 323
 324 #---------------- External Memory Options ----------------
 325
 326 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 327 # used for variables (.data/.bss) and heap (malloc()).
 328 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 329
 330 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 331 # only used for heap (malloc()).
 332 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 333
 334 EXTMEMOPTS =
 335
 336
 337
 338 #---------------- Linker Options ----------------
 339 #  -Wl,...:     tell GCC to pass this to linker.
 340 #    -Map:      create map file
 341 #    --cref:    add cross reference to  map file
 342 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 343 LDFLAGS += -Wl,--relax
 344 LDFLAGS += -Wl,--gc-sections
 345 LDFLAGS += $(EXTMEMOPTS)
 346 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 347 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 348 #LDFLAGS += -T linker_script.x
 349
 350
 351
 352 #---------------- Programming Options (avrdude) ----------------
 353
 354 # Programming hardware: alf avr910 avrisp bascom bsd
 355 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 356 #
 357 # Type: avrdude -c ?
 358 # to get a full listing.
 359 #
 360 AVRDUDE_PROGRAMMER = jtagmkII
 361
 362 # com1 = serial port. Use lpt1 to connect to parallel port.
 363 AVRDUDE_PORT = usb
 364
 365 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 366 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 367
 368
 369 # Uncomment the following if you want avrdude's erase cycle counter.
 370 # Note that this counter needs to be initialized first using -Yn,
 371 # see avrdude manual.
 372 #AVRDUDE_ERASE_COUNTER = -y
 373
 374 # Uncomment the following if you do /not/ wish a verification to be
 375 # performed after programming the device.
 376 #AVRDUDE_NO_VERIFY = -V
 377
 378 # Increase verbosity level.  Please use this when submitting bug
 379 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 380 # to submit bug reports.
 381 #AVRDUDE_VERBOSE = -v -v
 382
 383 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 384 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 385 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 386 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 387
 388
 389
 390 #---------------- Debugging Options ----------------
 391
 392 # For simulavr only - target MCU frequency.
 393 DEBUG_MFREQ = $(F_CPU)
 394
 395 # Set the DEBUG_UI to either gdb or insight.
 396 # DEBUG_UI = gdb
 397 DEBUG_UI = insight
 398
 399 # Set the debugging back-end to either avarice, simulavr.
 400 DEBUG_BACKEND = avarice
 401 #DEBUG_BACKEND = simulavr
 402
 403 # GDB Init Filename.
 404 GDBINIT_FILE = __avr_gdbinit
 405
 406 # When using avarice settings for the JTAG
 407 JTAG_DEV = /dev/com1
 408
 409 # Debugging port used to communicate between GDB / avarice / simulavr.
 410 DEBUG_PORT = 4242
 411
 412 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 413 #     just set to localhost unless doing some sort of crazy debugging when
 414 #     avarice is running on a different computer.
 415 DEBUG_HOST = localhost
 416
 417
 418
 419 #============================================================================
 420
 421
 422 # Define programs and commands.
 423 SHELL = sh
 424 CC = avr-gcc
 425 OBJCOPY = avr-objcopy
 426 OBJDUMP = avr-objdump
 427 SIZE = avr-size
 428 AR = avr-ar rcs
 429 NM = avr-nm
 430 AVRDUDE = avrdude
 431 REMOVE = rm -f
 432 REMOVEDIR = rm -rf
 433 COPY = cp
 434 WINSHELL = cmd
 435
 436 # Define Messages
 437 # English
 438 MSG_ERRORS_NONE = Errors: none
 439 MSG_BEGIN = -------- begin --------
 440 MSG_END = --------  end  --------
 441 MSG_SIZE_BEFORE = Size before:
 442 MSG_SIZE_AFTER = Size after:
 443 MSG_COFF = Converting to AVR COFF:
 444 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 445 MSG_FLASH = Creating load file for Flash:
 446 MSG_EEPROM = Creating load file for EEPROM:
 447 MSG_EXTENDED_LISTING = Creating Extended Listing:
 448 MSG_SYMBOL_TABLE = Creating Symbol Table:
 449 MSG_LINKING = Linking:
 450 MSG_COMPILING = Compiling C:
 451 MSG_COMPILING_CPP = Compiling C++:
 452 MSG_ASSEMBLING = Assembling:
 453 MSG_CLEANING = Cleaning project:
 454 MSG_CREATING_LIBRARY = Creating library:
 455
 456
 457
 458
 459 # Define all object files.
 460 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 461
 462 # Define all listing files.
 463 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 464
 465
 466 # Compiler flags to generate dependency files.
 467 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 468
 469
 470 # Combine all necessary flags and optional flags.
 471 # Add target processor to flags.
 472 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 473 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 474 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 475
 476
 477
 478
 479
 480 # Default target.
 481 all: begin gccversion sizebefore build showliboptions showtarget sizeafter end
 482
 483 # Change the build target to build a HEX file or a library.
 484 build: elf hex eep lss sym
 485 #build: lib
 486
 487
 488 elf: $(TARGET).elf
 489 hex: $(TARGET).hex
 490 eep: $(TARGET).eep
 491 lss: $(TARGET).lss
 492 sym: $(TARGET).sym
 493 LIBNAME=lib$(TARGET).a
 494 lib: $(LIBNAME)
 495
 496
 497
 498 # Eye candy.
 499 # AVR Studio 3.x does not check make's exit code but relies on
 500 # the following magic strings to be generated by the compile job.
 501 begin:
 502         @echo
 503         @echo $(MSG_BEGIN)
 504
 505 end:
 506         @echo $(MSG_END)
 507         @echo
 508
 509
 510 # Display size of file.
 511 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 512 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 513 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 514 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 515
 516 sizebefore:
 517         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 518         2>/dev/null; echo; fi
 519
 520 sizeafter:
 521         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 522         2>/dev/null; echo; fi
 523
 524 showliboptions:
 525         @echo
 526         @echo ---- Compile Time Library Options ----
 527         @for i in $(LUFA_OPTS:-D%=%); do \
 528                 echo $$i; \
 529         done
 530         @echo --------------------------------------
 531
 532 showtarget:
 533         @echo
 534         @echo --------- Target Information ---------
 535         @echo AVR Model: $(MCU)
 536         @echo Board:     $(BOARD)
 537         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 538         @echo --------------------------------------
 539
 540
 541 # Display compiler version information.
 542 gccversion :
 543         @$(CC) --version
 544
 545
 546 # Program the device.
 547 program: $(TARGET).hex $(TARGET).eep
 548         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 549
 550 flip: $(TARGET).hex
 551         batchisp -hardware usb -device $(MCU) -operation erase f
 552         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 553         batchisp -hardware usb -device $(MCU) -operation start reset 0
 554
 555 dfu: $(TARGET).hex
 556         dfu-programmer $(MCU) erase
 557         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 558         dfu-programmer $(MCU) reset
 559
 560 flip-ee: $(TARGET).hex $(TARGET).eep
 561         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 562         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 563         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 564         batchisp -hardware usb -device $(MCU) -operation start reset 0
 565         $(REMOVE) $(TARGET)eep.hex
 566
 567 dfu-ee: $(TARGET).hex $(TARGET).eep
 568         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 569         dfu-programmer $(MCU) reset
 570
 571
 572 # Generate avr-gdb config/init file which does the following:
 573 #     define the reset signal, load the target file, connect to target, and set
 574 #     a breakpoint at main().
 575 gdb-config:
 576         @$(REMOVE) $(GDBINIT_FILE)
 577         @echo define reset >> $(GDBINIT_FILE)
 578         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 579         @echo end >> $(GDBINIT_FILE)
 580         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 581         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 582 ifeq ($(DEBUG_BACKEND),simulavr)
 583         @echo load  >> $(GDBINIT_FILE)
 584 endif
 585         @echo break main >> $(GDBINIT_FILE)
 586
 587 debug: gdb-config $(TARGET).elf
 588 ifeq ($(DEBUG_BACKEND), avarice)
 589         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 590         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 591         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 592         @$(WINSHELL) /c pause
 593
 594 else
 595         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 596         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 597 endif
 598         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 599
 600
 601
 602
 603 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 604 COFFCONVERT = $(OBJCOPY) --debugging
 605 COFFCONVERT += --change-section-address .data-0x800000
 606 COFFCONVERT += --change-section-address .bss-0x800000
 607 COFFCONVERT += --change-section-address .noinit-0x800000
 608 COFFCONVERT += --change-section-address .eeprom-0x810000
 609
 610
 611
 612 coff: $(TARGET).elf
 613         @echo
 614         @echo $(MSG_COFF) $(TARGET).cof
 615         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 616
 617
 618 extcoff: $(TARGET).elf
 619         @echo
 620         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 621         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 622
 623
 624
 625 # Create final output files (.hex, .eep) from ELF output file.
 626 %.hex: %.elf
 627         @echo
 628         @echo $(MSG_FLASH) $@
 629         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 630
 631 %.eep: %.elf
 632         @echo
 633         @echo $(MSG_EEPROM) $@
 634         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 635         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 636
 637 # Create extended listing file from ELF output file.
 638 %.lss: %.elf
 639         @echo
 640         @echo $(MSG_EXTENDED_LISTING) $@
 641         $(OBJDUMP) -h -z -S $< > $@
 642
 643 # Create a symbol table from ELF output file.
 644 %.sym: %.elf
 645         @echo
 646         @echo $(MSG_SYMBOL_TABLE) $@
 647         $(NM) -n $< > $@
 648
 649
 650
 651 # Create library from object files.
 652 .SECONDARY : $(TARGET).a
 653 .PRECIOUS : $(OBJ)
 654 %.a: $(OBJ)
 655         @echo
 656         @echo $(MSG_CREATING_LIBRARY) $@
 657         $(AR) $@ $(OBJ)
 658
 659
 660 # Link: create ELF output file from object files.
 661 .SECONDARY : $(TARGET).elf
 662 .PRECIOUS : $(OBJ)
 663 %.elf: $(OBJ)
 664         @echo
 665         @echo $(MSG_LINKING) $@
 666         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 667
 668
 669 # Compile: create object files from C source files.
 670 $(OBJDIR)/%.o : %.c
 671         @echo
 672         @echo $(MSG_COMPILING) $<
 673         $(CC) -c $(ALL_CFLAGS) $< -o $@
 674
 675
 676 # Compile: create object files from C++ source files.
 677 $(OBJDIR)/%.o : %.cpp
 678         @echo
 679         @echo $(MSG_COMPILING_CPP) $<
 680         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 681
 682
 683 # Compile: create assembler files from C source files.
 684 %.s : %.c
 685         $(CC) -S $(ALL_CFLAGS) $< -o $@
 686
 687
 688 # Compile: create assembler files from C++ source files.
 689 %.s : %.cpp
 690         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 691
 692
 693 # Assemble: create object files from assembler source files.
 694 $(OBJDIR)/%.o : %.S
 695         @echo
 696         @echo $(MSG_ASSEMBLING) $<
 697         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 698
 699
 700 # Create preprocessed source for use in sending a bug report.
 701 %.i : %.c
 702         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 703
 704
 705 # Target: clean project.
 706 clean: begin clean_list clean_binary end
 707
 708 clean_binary:
 709         $(REMOVE) $(TARGET).hex
 710
 711 clean_list:
 712         @echo $(MSG_CLEANING)
 713         $(REMOVE) $(TARGET).eep
 714         $(REMOVE) $(TARGET)eep.hex
 715         $(REMOVE) $(TARGET).cof
 716         $(REMOVE) $(TARGET).elf
 717         $(REMOVE) $(TARGET).map
 718         $(REMOVE) $(TARGET).sym
 719         $(REMOVE) $(TARGET).lss
 720         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 721         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 722         $(REMOVE) $(SRC:.c=.s)
 723         $(REMOVE) $(SRC:.c=.d)
 724         $(REMOVE) $(SRC:.c=.i)
 725         $(REMOVE) InvalidEvents.tmp
 726         $(REMOVEDIR) .dep
 727
 728 doxygen:
 729         @echo Generating Project Documentation...
 730         @doxygen Doxygen.conf
 731         @echo Documentation Generation Complete.
 732
 733 clean_doxygen:
 734         rm -rf Documentation
 735
 736 # Create object files directory
 737 $(shell mkdir $(OBJDIR) 2>/dev/null)
 738
 739
 740 # Include the dependency files.
 741 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 742
 743
 744 # Listing of phony targets.
 745 .PHONY : all showliboptions showtarget begin       \
 746 finish end sizebefore sizeafter gccversion build   \
 747 elf hex eep lss sym coff extcoff program dfu flip  \
 748 flip-ee dfu-ee clean debug clean_list clean_binary \
 749 clean_doxygen gdb-config doxygen