Demos/Host/Incomplete/BluetoothHost/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #     Typical values are:
  78 #         F_CPU =  1000000
  79 #         F_CPU =  1843200
  80 #         F_CPU =  2000000
  81 #         F_CPU =  3686400
  82 #         F_CPU =  4000000
  83 #         F_CPU =  7372800
  84 #         F_CPU =  8000000
  85 #         F_CPU = 11059200
  86 #         F_CPU = 14745600
  87 #         F_CPU = 16000000
  88 #         F_CPU = 18432000
  89 #         F_CPU = 20000000
  90 F_CPU = 16000000
  91
  92
  93 # Input clock frequency.
  94 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  95 #     input clock frequency (before any prescaling is performed). This value may
  96 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  97 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  98 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  99 #     at the end, this will be done automatically to create a 32-bit value in your
 100 #     source code.
 101 #
 102 #     If no clock division is performed on the input clock inside the AVR (via the
 103 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 104 F_CLOCK = $(F_CPU)
 105
 106
 107 # Output format. (can be srec, ihex, binary)
 108 FORMAT = ihex
 109
 110
 111 # Target file name (without extension).
 112 TARGET = BluetoothHost
 113
 114
 115 # Object files directory
 116 #     To put object files in current directory, use a dot (.), do NOT make
 117 #     this an empty or blank macro!
 118 OBJDIR = .
 119
 120
 121 # Path to the LUFA library
 122 LUFA_PATH = ../../../..
 123
 124
 125 # LUFA library compile-time options
 126 LUFA_OPTS  = -D USB_HOST_ONLY
 127 LUFA_OPTS += -D NO_STREAM_CALLBACKS
 128 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 129
 130
 131 # List C source files here. (C dependencies are automatically generated.)
 132 SRC = $(TARGET).c                                                 \
 133           BluetoothEvents.c                                           \
 134           DeviceDescriptor.c                                          \
 135           ConfigDescriptor.c                                          \
 136           Lib/BluetoothStack.c                                        \
 137           Lib/BluetoothHCICommands.c                                  \
 138           Lib/BluetoothACLPackets.c                                   \
 139           Lib/SDP.c                                                   \
 140           Lib/SDPServices.c                                           \
 141           Lib/RFCOMM.c                                                \
 142           Lib/RFCOMMControl.c                                         \
 143           $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c         \
 144           $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 145           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 146           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c             \
 147           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 151           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 152           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
 153           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 154           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 155           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 156
 157
 158 # List C++ source files here. (C dependencies are automatically generated.)
 159 CPPSRC =
 160
 161
 162 # List Assembler source files here.
 163 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 164 #     will not be considered source files but generated files (assembler
 165 #     output from the compiler), and will be deleted upon "make clean"!
 166 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 167 #     it will preserve the spelling of the filenames, and gcc itself does
 168 #     care about how the name is spelled on its command-line.
 169 ASRC =
 170
 171
 172 # Optimization level, can be [0, 1, 2, 3, s].
 173 #     0 = turn off optimization. s = optimize for size.
 174 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 175 OPT = s
 176
 177
 178 # Debugging format.
 179 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 180 #     AVR Studio 4.10 requires dwarf-2.
 181 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 182 DEBUG = dwarf-2
 183
 184
 185 # List any extra directories to look for include files here.
 186 #     Each directory must be seperated by a space.
 187 #     Use forward slashes for directory separators.
 188 #     For a directory that has spaces, enclose it in quotes.
 189 EXTRAINCDIRS = $(LUFA_PATH)/
 190
 191
 192 # Compiler flag to set the C Standard level.
 193 #     c89   = "ANSI" C
 194 #     gnu89 = c89 plus GCC extensions
 195 #     c99   = ISO C99 standard (not yet fully implemented)
 196 #     gnu99 = c99 plus GCC extensions
 197 CSTANDARD = -std=c99
 198
 199
 200 # Place -D or -U options here for C sources
 201 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 202
 203
 204 # Place -D or -U options here for ASM sources
 205 ADEFS = -DF_CPU=$(F_CPU)
 206
 207
 208 # Place -D or -U options here for C++ sources
 209 CPPDEFS = -DF_CPU=$(F_CPU)UL
 210 #CPPDEFS += -D__STDC_LIMIT_MACROS
 211 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 212
 213
 214
 215 #---------------- Compiler Options C ----------------
 216 #  -g*:          generate debugging information
 217 #  -O*:          optimization level
 218 #  -f...:        tuning, see GCC manual and avr-libc documentation
 219 #  -Wall...:     warning level
 220 #  -Wa,...:      tell GCC to pass this to the assembler.
 221 #    -adhlns...: create assembler listing
 222 CFLAGS = -g$(DEBUG)
 223 CFLAGS += $(CDEFS)
 224 CFLAGS += -O$(OPT)
 225 CFLAGS += -funsigned-char
 226 CFLAGS += -funsigned-bitfields
 227 CFLAGS += -ffunction-sections
 228 CFLAGS += -fno-inline-small-functions
 229 CFLAGS += -fpack-struct
 230 CFLAGS += -fshort-enums
 231 CFLAGS += -fno-strict-aliasing
 232 CFLAGS += -Wall
 233 CFLAGS += -Wstrict-prototypes
 234 CFLAGS += -Wundef
 235 #CFLAGS += -fno-unit-at-a-time
 236 #CFLAGS += -Wunreachable-code
 237 #CFLAGS += -Wsign-compare
 238 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 239 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 240 CFLAGS += $(CSTANDARD)
 241
 242
 243 #---------------- Compiler Options C++ ----------------
 244 #  -g*:          generate debugging information
 245 #  -O*:          optimization level
 246 #  -f...:        tuning, see GCC manual and avr-libc documentation
 247 #  -Wall...:     warning level
 248 #  -Wa,...:      tell GCC to pass this to the assembler.
 249 #    -adhlns...: create assembler listing
 250 CPPFLAGS = -g$(DEBUG)
 251 CPPFLAGS += $(CPPDEFS)
 252 CPPFLAGS += -O$(OPT)
 253 CPPFLAGS += -funsigned-char
 254 CPPFLAGS += -funsigned-bitfields
 255 CPPFLAGS += -fpack-struct
 256 CPPFLAGS += -fshort-enums
 257 CPPFLAGS += -fno-exceptions
 258 CPPFLAGS += -Wall
 259 CFLAGS += -Wundef
 260 #CPPFLAGS += -mshort-calls
 261 #CPPFLAGS += -fno-unit-at-a-time
 262 #CPPFLAGS += -Wstrict-prototypes
 263 #CPPFLAGS += -Wunreachable-code
 264 #CPPFLAGS += -Wsign-compare
 265 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 266 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 267 #CPPFLAGS += $(CSTANDARD)
 268
 269
 270 #---------------- Assembler Options ----------------
 271 #  -Wa,...:   tell GCC to pass this to the assembler.
 272 #  -adhlns:   create listing
 273 #  -gstabs:   have the assembler create line number information; note that
 274 #             for use in COFF files, additional information about filenames
 275 #             and function names needs to be present in the assembler source
 276 #             files -- see avr-libc docs [FIXME: not yet described there]
 277 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 278 #       dump that will be displayed for a given single line of source input.
 279 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 280
 281
 282 #---------------- Library Options ----------------
 283 # Minimalistic printf version
 284 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 285
 286 # Floating point printf version (requires MATH_LIB = -lm below)
 287 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 288
 289 # If this is left blank, then it will use the Standard printf version.
 290 PRINTF_LIB =
 291 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 292 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 293
 294
 295 # Minimalistic scanf version
 296 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 297
 298 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 299 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 300
 301 # If this is left blank, then it will use the Standard scanf version.
 302 SCANF_LIB =
 303 #SCANF_LIB = $(SCANF_LIB_MIN)
 304 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 305
 306
 307 MATH_LIB = -lm
 308
 309
 310 # List any extra directories to look for libraries here.
 311 #     Each directory must be seperated by a space.
 312 #     Use forward slashes for directory separators.
 313 #     For a directory that has spaces, enclose it in quotes.
 314 EXTRALIBDIRS =
 315
 316
 317
 318 #---------------- External Memory Options ----------------
 319
 320 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 321 # used for variables (.data/.bss) and heap (malloc()).
 322 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 323
 324 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 325 # only used for heap (malloc()).
 326 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 327
 328 EXTMEMOPTS =
 329
 330
 331
 332 #---------------- Linker Options ----------------
 333 #  -Wl,...:     tell GCC to pass this to linker.
 334 #    -Map:      create map file
 335 #    --cref:    add cross reference to  map file
 336 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 337 LDFLAGS += -Wl,--relax
 338 LDFLAGS += -Wl,--gc-sections
 339 LDFLAGS += $(EXTMEMOPTS)
 340 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 341 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 342 #LDFLAGS += -T linker_script.x
 343
 344
 345
 346 #---------------- Programming Options (avrdude) ----------------
 347
 348 # Programming hardware: alf avr910 avrisp bascom bsd
 349 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 350 #
 351 # Type: avrdude -c ?
 352 # to get a full listing.
 353 #
 354 AVRDUDE_PROGRAMMER = jtagmkII
 355
 356 # com1 = serial port. Use lpt1 to connect to parallel port.
 357 AVRDUDE_PORT = usb
 358
 359 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 360 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 361
 362
 363 # Uncomment the following if you want avrdude's erase cycle counter.
 364 # Note that this counter needs to be initialized first using -Yn,
 365 # see avrdude manual.
 366 #AVRDUDE_ERASE_COUNTER = -y
 367
 368 # Uncomment the following if you do /not/ wish a verification to be
 369 # performed after programming the device.
 370 #AVRDUDE_NO_VERIFY = -V
 371
 372 # Increase verbosity level.  Please use this when submitting bug
 373 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 374 # to submit bug reports.
 375 #AVRDUDE_VERBOSE = -v -v
 376
 377 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 378 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 379 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 380 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 381
 382
 383
 384 #---------------- Debugging Options ----------------
 385
 386 # For simulavr only - target MCU frequency.
 387 DEBUG_MFREQ = $(F_CPU)
 388
 389 # Set the DEBUG_UI to either gdb or insight.
 390 # DEBUG_UI = gdb
 391 DEBUG_UI = insight
 392
 393 # Set the debugging back-end to either avarice, simulavr.
 394 DEBUG_BACKEND = avarice
 395 #DEBUG_BACKEND = simulavr
 396
 397 # GDB Init Filename.
 398 GDBINIT_FILE = __avr_gdbinit
 399
 400 # When using avarice settings for the JTAG
 401 JTAG_DEV = /dev/com1
 402
 403 # Debugging port used to communicate between GDB / avarice / simulavr.
 404 DEBUG_PORT = 4242
 405
 406 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 407 #     just set to localhost unless doing some sort of crazy debugging when
 408 #     avarice is running on a different computer.
 409 DEBUG_HOST = localhost
 410
 411
 412
 413 #============================================================================
 414
 415
 416 # Define programs and commands.
 417 SHELL = sh
 418 CC = avr-gcc
 419 OBJCOPY = avr-objcopy
 420 OBJDUMP = avr-objdump
 421 SIZE = avr-size
 422 AR = avr-ar rcs
 423 NM = avr-nm
 424 AVRDUDE = avrdude
 425 REMOVE = rm -f
 426 REMOVEDIR = rm -rf
 427 COPY = cp
 428 WINSHELL = cmd
 429
 430 # Define Messages
 431 # English
 432 MSG_ERRORS_NONE = Errors: none
 433 MSG_BEGIN = -------- begin --------
 434 MSG_END = --------  end  --------
 435 MSG_SIZE_BEFORE = Size before:
 436 MSG_SIZE_AFTER = Size after:
 437 MSG_COFF = Converting to AVR COFF:
 438 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 439 MSG_FLASH = Creating load file for Flash:
 440 MSG_EEPROM = Creating load file for EEPROM:
 441 MSG_EXTENDED_LISTING = Creating Extended Listing:
 442 MSG_SYMBOL_TABLE = Creating Symbol Table:
 443 MSG_LINKING = Linking:
 444 MSG_COMPILING = Compiling C:
 445 MSG_COMPILING_CPP = Compiling C++:
 446 MSG_ASSEMBLING = Assembling:
 447 MSG_CLEANING = Cleaning project:
 448 MSG_CREATING_LIBRARY = Creating library:
 449
 450
 451
 452
 453 # Define all object files.
 454 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 455
 456 # Define all listing files.
 457 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 458
 459
 460 # Compiler flags to generate dependency files.
 461 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 462
 463
 464 # Combine all necessary flags and optional flags.
 465 # Add target processor to flags.
 466 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 467 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 468 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 469
 470
 471
 472
 473
 474 # Default target.
 475 all: begin gccversion sizebefore build showliboptions showtarget sizeafter end
 476
 477 # Change the build target to build a HEX file or a library.
 478 build: elf hex eep lss sym
 479 #build: lib
 480
 481
 482 elf: $(TARGET).elf
 483 hex: $(TARGET).hex
 484 eep: $(TARGET).eep
 485 lss: $(TARGET).lss
 486 sym: $(TARGET).sym
 487 LIBNAME=lib$(TARGET).a
 488 lib: $(LIBNAME)
 489
 490
 491
 492 # Eye candy.
 493 # AVR Studio 3.x does not check make's exit code but relies on
 494 # the following magic strings to be generated by the compile job.
 495 begin:
 496         @echo
 497         @echo $(MSG_BEGIN)
 498
 499 end:
 500         @echo $(MSG_END)
 501         @echo
 502
 503
 504 # Display size of file.
 505 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 506 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 507 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 508 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 509
 510 sizebefore:
 511         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 512         2>/dev/null; echo; fi
 513
 514 sizeafter:
 515         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 516         2>/dev/null; echo; fi
 517
 518 showliboptions:
 519         @echo
 520         @echo ---- Compile Time Library Options ----
 521         @for i in $(LUFA_OPTS:-D%=%); do \
 522                 echo $$i; \
 523         done
 524         @echo --------------------------------------
 525
 526 showtarget:
 527         @echo
 528         @echo --------- Target Information ---------
 529         @echo AVR Model: $(MCU)
 530         @echo Board:     $(BOARD)
 531         @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
 532         @echo --------------------------------------
 533
 534
 535 # Display compiler version information.
 536 gccversion :
 537         @$(CC) --version
 538
 539
 540 # Program the device.
 541 program: $(TARGET).hex $(TARGET).eep
 542         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 543
 544 flip: $(TARGET).hex
 545         batchisp -hardware usb -device $(MCU) -operation erase f
 546         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 547         batchisp -hardware usb -device $(MCU) -operation start reset 0
 548
 549 dfu: $(TARGET).hex
 550         dfu-programmer $(MCU) erase
 551         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 552         dfu-programmer $(MCU) reset
 553
 554 flip-ee: $(TARGET).hex $(TARGET).eep
 555         $(COPY) $(TARGET).eep $(TARGET)eep.hex
 556         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 557         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 558         batchisp -hardware usb -device $(MCU) -operation start reset 0
 559         $(REMOVE) $(TARGET)eep.hex
 560
 561 dfu-ee: $(TARGET).hex $(TARGET).eep
 562         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 563         dfu-programmer $(MCU) reset
 564
 565
 566 # Generate avr-gdb config/init file which does the following:
 567 #     define the reset signal, load the target file, connect to target, and set
 568 #     a breakpoint at main().
 569 gdb-config:
 570         @$(REMOVE) $(GDBINIT_FILE)
 571         @echo define reset >> $(GDBINIT_FILE)
 572         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 573         @echo end >> $(GDBINIT_FILE)
 574         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 575         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 576 ifeq ($(DEBUG_BACKEND),simulavr)
 577         @echo load  >> $(GDBINIT_FILE)
 578 endif
 579         @echo break main >> $(GDBINIT_FILE)
 580
 581 debug: gdb-config $(TARGET).elf
 582 ifeq ($(DEBUG_BACKEND), avarice)
 583         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 584         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 585         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 586         @$(WINSHELL) /c pause
 587
 588 else
 589         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 590         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 591 endif
 592         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 593
 594
 595
 596
 597 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 598 COFFCONVERT = $(OBJCOPY) --debugging
 599 COFFCONVERT += --change-section-address .data-0x800000
 600 COFFCONVERT += --change-section-address .bss-0x800000
 601 COFFCONVERT += --change-section-address .noinit-0x800000
 602 COFFCONVERT += --change-section-address .eeprom-0x810000
 603
 604
 605
 606 coff: $(TARGET).elf
 607         @echo
 608         @echo $(MSG_COFF) $(TARGET).cof
 609         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 610
 611
 612 extcoff: $(TARGET).elf
 613         @echo
 614         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 615         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 616
 617
 618
 619 # Create final output files (.hex, .eep) from ELF output file.
 620 %.hex: %.elf
 621         @echo
 622         @echo $(MSG_FLASH) $@
 623         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 624
 625 %.eep: %.elf
 626         @echo
 627         @echo $(MSG_EEPROM) $@
 628         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 629         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 630
 631 # Create extended listing file from ELF output file.
 632 %.lss: %.elf
 633         @echo
 634         @echo $(MSG_EXTENDED_LISTING) $@
 635         $(OBJDUMP) -h -z -S $< > $@
 636
 637 # Create a symbol table from ELF output file.
 638 %.sym: %.elf
 639         @echo
 640         @echo $(MSG_SYMBOL_TABLE) $@
 641         $(NM) -n $< > $@
 642
 643
 644
 645 # Create library from object files.
 646 .SECONDARY : $(TARGET).a
 647 .PRECIOUS : $(OBJ)
 648 %.a: $(OBJ)
 649         @echo
 650         @echo $(MSG_CREATING_LIBRARY) $@
 651         $(AR) $@ $(OBJ)
 652
 653
 654 # Link: create ELF output file from object files.
 655 .SECONDARY : $(TARGET).elf
 656 .PRECIOUS : $(OBJ)
 657 %.elf: $(OBJ)
 658         @echo
 659         @echo $(MSG_LINKING) $@
 660         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 661
 662
 663 # Compile: create object files from C source files.
 664 $(OBJDIR)/%.o : %.c
 665         @echo
 666         @echo $(MSG_COMPILING) $<
 667         $(CC) -c $(ALL_CFLAGS) $< -o $@
 668
 669
 670 # Compile: create object files from C++ source files.
 671 $(OBJDIR)/%.o : %.cpp
 672         @echo
 673         @echo $(MSG_COMPILING_CPP) $<
 674         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 675
 676
 677 # Compile: create assembler files from C source files.
 678 %.s : %.c
 679         $(CC) -S $(ALL_CFLAGS) $< -o $@
 680
 681
 682 # Compile: create assembler files from C++ source files.
 683 %.s : %.cpp
 684         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 685
 686
 687 # Assemble: create object files from assembler source files.
 688 $(OBJDIR)/%.o : %.S
 689         @echo
 690         @echo $(MSG_ASSEMBLING) $<
 691         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 692
 693
 694 # Create preprocessed source for use in sending a bug report.
 695 %.i : %.c
 696         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 697
 698
 699 # Target: clean project.
 700 clean: begin clean_list clean_binary end
 701
 702 clean_binary:
 703         $(REMOVE) $(TARGET).hex
 704
 705 clean_list:
 706         @echo $(MSG_CLEANING)
 707         $(REMOVE) $(TARGET).eep
 708         $(REMOVE) $(TARGET)eep.hex
 709         $(REMOVE) $(TARGET).cof
 710         $(REMOVE) $(TARGET).elf
 711         $(REMOVE) $(TARGET).map
 712         $(REMOVE) $(TARGET).sym
 713         $(REMOVE) $(TARGET).lss
 714         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 715         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 716         $(REMOVE) $(SRC:.c=.s)
 717         $(REMOVE) $(SRC:.c=.d)
 718         $(REMOVE) $(SRC:.c=.i)
 719         $(REMOVE) InvalidEvents.tmp
 720         $(REMOVEDIR) .dep
 721
 722 doxygen:
 723         @echo Generating Project Documentation...
 724         @doxygen Doxygen.conf
 725         @echo Documentation Generation Complete.
 726
 727 clean_doxygen:
 728         rm -rf Documentation
 729
 730 # Create object files directory
 731 $(shell mkdir $(OBJDIR) 2>/dev/null)
 732
 733
 734 # Include the dependency files.
 735 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 736
 737
 738 # Listing of phony targets.
 739 .PHONY : all showliboptions showtarget begin       \
 740 finish end sizebefore sizeafter gccversion build   \
 741 elf hex eep lss sym coff extcoff program dfu flip  \
 742 flip-ee dfu-ee clean debug clean_list clean_binary \
 743 clean_doxygen gdb-config doxygen