LUFA/Drivers/USB/Core/UC3/Device_UC3.h

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2011.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *  \brief USB Device definitions for the AVR32 UC3 microcontrollers.
  33  *  \copydetails Group_Device_UC3
  34  *
  35  *  \note This file should not be included directly. It is automatically included as needed by the USB driver
  36  *        dispatch header located in LUFA/Drivers/USB/USB.h.
  37  */
  38
  39 /** \ingroup Group_Device
  40  *  \defgroup Group_Device_UC3 Device Management (UC3)
  41  *  \brief USB Device definitions for the AVR32 UC3 microcontrollers.
  42  *
  43  *  Architecture specific USB Device definitions for the Atmel 32-bit UC3 AVR microcontrollers.
  44  *
  45  *  @{
  46  */
  47
  48 #ifndef __USBDEVICE_UC3_H__
  49 #define __USBDEVICE_UC3_H__
  50
  51         /* Includes: */
  52                 #include "../../../../Common/Common.h"
  53                 #include "../StdDescriptors.h"
  54                 #include "../USBInterrupt.h"
  55                 #include "../Endpoint.h"
  56
  57         /* Preprocessor Checks: */
  58                 #if !defined(__INCLUDE_FROM_USB_DRIVER)
  59                         #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
  60                 #endif
  61
  62         /* Public Interface - May be used in end-application: */
  63                 /* Macros: */
  64                         /** \name USB Device Mode Option Masks */
  65                         //@{
  66                         /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
  67                          *  USB interface should be initialized in low speed (1.5Mb/s) mode.
  68                          *
  69                          *  \note Restrictions apply on the number, size and type of endpoints which can be used
  70                          *        when running in low speed mode - refer to the USB 2.0 specification.
  71                          */
  72                         #define USB_DEVICE_OPT_LOWSPEED                (1 << 0)
  73
  74                         /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
  75                          *  USB interface should be initialized in full speed (12Mb/s) mode.
  76                          */
  77                         #define USB_DEVICE_OPT_FULLSPEED               (0 << 0)
  78                         //@}
  79
  80                         #if (!defined(NO_INTERNAL_SERIAL) && \
  81                              (defined(USB_SERIES_UC3A3_AVR) || defined(USB_SERIES_UC3A4_AVR) || \
  82                                   defined(__DOXYGEN__)))
  83                                 /** String descriptor index for the device's unique serial number string descriptor within the device.
  84                                  *  This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
  85                                  *  number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
  86                                  *  a unique serial number internally, and setting the device descriptors serial number string index to this value
  87                                  *  will cause it to use the internal serial number.
  88                                  *
  89                                  *  On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial
  90                                  *  number for the device.
  91                                  */
  92                                 #define USE_INTERNAL_SERIAL           0xDC
  93
  94                                 /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller
  95                                  *  model.
  96                                  */
  97                                 #define INTERNAL_SERIAL_LENGTH_BITS   120
  98                         #else
  99                                 #define USE_INTERNAL_SERIAL           NO_DESCRIPTOR
 100
 101                                 #define INTERNAL_SERIAL_LENGTH_BITS   0
 102                         #endif
 103
 104                 /* Function Prototypes: */
 105                         /** Sends a Remote Wakeup request to the host. This signals to the host that the device should
 106                          *  be taken out of suspended mode, and communications should resume.
 107                          *
 108                          *  Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
 109                          *  host computer when the host has suspended all USB devices to enter a low power state.
 110                          *
 111                          *  \note This macro should only be used if the device has indicated to the host that it
 112                          *        supports the Remote Wakeup feature in the device descriptors, and should only be
 113                          *        issued if the host is currently allowing remote wakeup events from the device (i.e.,
 114                          *        the \ref USB_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP compile
 115                          *        time option is used, this macro is unavailable.
 116                          *        \n\n
 117                          *
 118                          *  \note The USB clock must be running for this function to operate. If the stack is initialized with
 119                          *        the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
 120                          *        before attempting to call this function.
 121                          *
 122                          *  \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors.
 123                          */
 124                         void USB_Device_SendRemoteWakeup(void);
 125
 126                 /* Inline Functions: */
 127                         /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
 128                          *  the frame number is incremented by one.
 129                          */
 130                         static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
 131                         static inline uint16_t USB_Device_GetFrameNumber(void)
 132                         {
 133                                 return AVR32_USBB.UDFNUM.fnum;
 134                         }
 135
 136                         #if !defined(NO_SOF_EVENTS)
 137                                 /** Enables the device mode Start Of Frame events. When enabled, this causes the
 138                                  *  \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
 139                                  *  at the start of each USB frame when enumerated in device mode.
 140                                  *
 141                                  *  \note Not available when the \c NO_SOF_EVENTS compile time token is defined.
 142                                  */
 143                                 static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
 144                                 static inline void USB_Device_EnableSOFEvents(void)
 145                                 {
 146                                         USB_INT_Enable(USB_INT_SOFI);
 147                                 }
 148
 149                                 /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
 150                                  *  \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
 151                                  *
 152                                  *  \note Not available when the \c NO_SOF_EVENTS compile time token is defined.
 153                                  */
 154                                 static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
 155                                 static inline void USB_Device_DisableSOFEvents(void)
 156                                 {
 157                                         USB_INT_Disable(USB_INT_SOFI);
 158                                 }
 159                         #endif
 160
 161         /* Private Interface - For use in library only: */
 162         #if !defined(__DOXYGEN__)
 163                 /* Inline Functions: */
 164                         static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
 165                         static inline void USB_Device_SetLowSpeed(void)
 166                         {
 167                                 AVR32_USBB.UDCON.ls = true;
 168                         }
 169
 170                         static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
 171                         static inline void USB_Device_SetFullSpeed(void)
 172                         {
 173                                 AVR32_USBB.UDCON.ls = false;
 174                         }
 175
 176                         static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
 177                         static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
 178                         {
 179                                 AVR32_USBB.UDCON.uadd  = Address;
 180                                 AVR32_USBB.UDCON.adden = true;
 181                         }
 182
 183                         static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
 184                         static inline bool USB_Device_IsAddressSet(void)
 185                         {
 186                                 return AVR32_USBB.UDCON.adden;
 187                         }
 188
 189                         static inline void USB_Device_GetSerialString(uint16_t* UnicodeString)
 190                         {
 191                                 uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
 192                                 GlobalInterruptDisable();
 193
 194                                 uint8_t* SigReadAddress = (uint8_t*)0x80800204;
 195
 196                                 for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++)
 197                                 {
 198                                         uint8_t SerialByte = *SigReadAddress;
 199
 200                                         if (SerialCharNum & 0x01)
 201                                         {
 202                                                 SerialByte >>= 4;
 203                                                 SigReadAddress++;
 204                                         }
 205
 206                                         SerialByte &= 0x0F;
 207
 208                                         UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ?
 209                                                                                                                            (('A' - 10) + SerialByte) : ('0' + SerialByte));
 210                                 }
 211
 212                                 SetGlobalInterruptMask(CurrentGlobalInt);
 213                         }
 214         #endif
 215
 216 #endif
 217
 218 /** @} */
 219