Bootloaders/HID/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make doxygen = Generate DoxyGen documentation for the project (must have
  36 #                DoxyGen installed)
  37 #
  38 # make debug = Start either simulavr or avarice as specified for debugging,
  39 #              with avr-gdb or avr-insight as the front end for debugging.
  40 #
  41 # make filename.s = Just compile filename.c into the assembler code only.
  42 #
  43 # make filename.i = Create a preprocessed source file for use in submitting
  44 #                   bug reports to the GCC project.
  45 #
  46 # To rebuild project do "make clean" then "make all".
  47 #----------------------------------------------------------------------------
  48
  49
  50 # MCU name
  51 MCU = at90usb1287
  52
  53
  54 # Target architecture (see library "Board Types" documentation).
  55 ARCH = AVR8
  56
  57
  58 # Target board (see library "Board Types" documentation, NONE for projects not requiring
  59 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  60 # "Board" inside the application directory.
  61 BOARD = USBKEY
  62
  63
  64 # Processor frequency.
  65 #     This will define a symbol, F_CPU, in all source code files equal to the
  66 #     processor frequency in Hz. You can then use this symbol in your source code to
  67 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  68 #     automatically to create a 32-bit value in your source code.
  69 #
  70 #     This will be an integer division of F_USB below, as it is sourced by
  71 #     F_USB after it has run through any CPU prescalers. Note that this value
  72 #     does not *change* the processor frequency - it should merely be updated to
  73 #     reflect the processor speed set externally so that the code can use accurate
  74 #     software delays.
  75 F_CPU = 8000000
  76
  77
  78 # Input clock frequency.
  79 #     This will define a symbol, F_USB, in all source code files equal to the
  80 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  81 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  82 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  83 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  84 #     at the end, this will be done automatically to create a 32-bit value in your
  85 #     source code.
  86 #
  87 #     If no clock division is performed on the input clock inside the AVR (via the
  88 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  89 F_USB = $(F_CPU)
  90
  91
  92 # Starting byte address of the bootloader, as a byte address - computed via the formula
  93 #   BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
  94 #
  95 # Note that the bootloader size and start address given in AVRStudio is in words and not
  96 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
  97 FLASH_SIZE_KB        = 128
  98 BOOT_SECTION_SIZE_KB = 4
  99 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
 100
 101
 102 # Output format. (can be srec, ihex, binary)
 103 FORMAT = ihex
 104
 105
 106 # Target file name (without extension).
 107 TARGET = BootloaderHID
 108
 109
 110 # Object files directory
 111 #     To put object files in current directory, use a dot (.), do NOT make
 112 #     this an empty or blank macro!
 113 OBJDIR = .
 114
 115
 116 # Path to the LUFA library
 117 LUFA_PATH = ../..
 118
 119
 120 # LUFA library compile-time options and predefined tokens
 121 LUFA_OPTS  = -D USB_DEVICE_ONLY
 122 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 123 LUFA_OPTS += -D ORDERED_EP_CONFIG
 124 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 125 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 126 LUFA_OPTS += -D USE_RAM_DESCRIPTORS
 127 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 128 LUFA_OPTS += -D NO_INTERNAL_SERIAL
 129 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 130 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 131 LUFA_OPTS += -D NO_SOF_EVENTS
 132
 133
 134 # Create the LUFA source path variables by including the LUFA root makefile
 135 include $(LUFA_PATH)/LUFA/makefile
 136
 137
 138 # List C source files here. (C dependencies are automatically generated.)
 139 SRC = $(TARGET).c                                                 \
 140           Descriptors.c                                               \
 141           $(LUFA_SRC_USB)                                             \
 142
 143
 144 # List C++ source files here. (C dependencies are automatically generated.)
 145 CPPSRC =
 146
 147
 148 # List Assembler source files here.
 149 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 150 #     will not be considered source files but generated files (assembler
 151 #     output from the compiler), and will be deleted upon "make clean"!
 152 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 153 #     it will preserve the spelling of the filenames, and gcc itself does
 154 #     care about how the name is spelled on its command-line.
 155 ASRC =
 156
 157
 158 # Optimization level, can be [0, 1, 2, 3, s].
 159 #     0 = turn off optimization. s = optimize for size.
 160 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 161 OPT = s
 162
 163
 164 # Debugging format.
 165 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 166 #     AVR Studio 4.10 requires dwarf-2.
 167 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 168 DEBUG = dwarf-2
 169
 170
 171 # List any extra directories to look for include files here.
 172 #     Each directory must be seperated by a space.
 173 #     Use forward slashes for directory separators.
 174 #     For a directory that has spaces, enclose it in quotes.
 175 EXTRAINCDIRS = $(LUFA_PATH)/
 176
 177
 178 # Compiler flag to set the C Standard level.
 179 #     c89   = "ANSI" C
 180 #     gnu89 = c89 plus GCC extensions
 181 #     c99   = ISO C99 standard (not yet fully implemented)
 182 #     gnu99 = c99 plus GCC extensions
 183 CSTANDARD = -std=c99
 184
 185
 186 # Place -D or -U options here for C sources
 187 CDEFS  = -DF_CPU=$(F_CPU)UL
 188 CDEFS += -DF_USB=$(F_USB)UL
 189 CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
 190 CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 191 CDEFS += $(LUFA_OPTS)
 192
 193
 194 # Place -D or -U options here for ASM sources
 195 ADEFS  = -DF_CPU=$(F_CPU)
 196 ADEFS += -DF_USB=$(F_USB)UL
 197 ADEFS += -DBOARD=BOARD_$(BOARD)
 198 ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 199 ADEFS += $(LUFA_OPTS)
 200
 201
 202 # Place -D or -U options here for C++ sources
 203 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 204 CPPDEFS += -DF_USB=$(F_USB)UL
 205 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 206 CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 207 CPPDEFS += $(LUFA_OPTS)
 208 #CPPDEFS += -D__STDC_LIMIT_MACROS
 209 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 210
 211
 212
 213 #---------------- Compiler Options C ----------------
 214 #  -g*:          generate debugging information
 215 #  -O*:          optimization level
 216 #  -f...:        tuning, see GCC manual and avr-libc documentation
 217 #  -Wall...:     warning level
 218 #  -Wa,...:      tell GCC to pass this to the assembler.
 219 #    -adhlns...: create assembler listing
 220 CFLAGS = -g$(DEBUG)
 221 CFLAGS += $(CDEFS)
 222 CFLAGS += -O$(OPT)
 223 CFLAGS += -funsigned-char
 224 CFLAGS += -funsigned-bitfields
 225 CFLAGS += -ffunction-sections
 226 CFLAGS += -fno-inline-small-functions
 227 CFLAGS += -fpack-struct
 228 CFLAGS += -fshort-enums
 229 CFLAGS += -fno-strict-aliasing
 230 CFLAGS += -Wall
 231 CFLAGS += -Wstrict-prototypes
 232 #CFLAGS += -mshort-calls
 233 #CFLAGS += -fno-unit-at-a-time
 234 #CFLAGS += -Wundef
 235 #CFLAGS += -Wunreachable-code
 236 #CFLAGS += -Wsign-compare
 237 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 238 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 239 CFLAGS += $(CSTANDARD)
 240
 241
 242 #---------------- Compiler Options C++ ----------------
 243 #  -g*:          generate debugging information
 244 #  -O*:          optimization level
 245 #  -f...:        tuning, see GCC manual and avr-libc documentation
 246 #  -Wall...:     warning level
 247 #  -Wa,...:      tell GCC to pass this to the assembler.
 248 #    -adhlns...: create assembler listing
 249 CPPFLAGS = -g$(DEBUG)
 250 CPPFLAGS += $(CPPDEFS)
 251 CPPFLAGS += -O$(OPT)
 252 CPPFLAGS += -funsigned-char
 253 CPPFLAGS += -funsigned-bitfields
 254 CPPFLAGS += -fpack-struct
 255 CPPFLAGS += -fshort-enums
 256 CPPFLAGS += -fno-exceptions
 257 CPPFLAGS += -Wall
 258 CPPFLAGS += -Wundef
 259 #CPPFLAGS += -mshort-calls
 260 #CPPFLAGS += -fno-unit-at-a-time
 261 #CPPFLAGS += -Wstrict-prototypes
 262 #CPPFLAGS += -Wunreachable-code
 263 #CPPFLAGS += -Wsign-compare
 264 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 265 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 266 #CPPFLAGS += $(CSTANDARD)
 267
 268
 269 #---------------- Assembler Options ----------------
 270 #  -Wa,...:   tell GCC to pass this to the assembler.
 271 #  -adhlns:   create listing
 272 #  -gstabs:   have the assembler create line number information; note that
 273 #             for use in COFF files, additional information about filenames
 274 #             and function names needs to be present in the assembler source
 275 #             files -- see avr-libc docs [FIXME: not yet described there]
 276 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 277 #       dump that will be displayed for a given single line of source input.
 278 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 279
 280
 281 #---------------- Library Options ----------------
 282 # Minimalistic printf version
 283 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 284
 285 # Floating point printf version (requires MATH_LIB = -lm below)
 286 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 287
 288 # If this is left blank, then it will use the Standard printf version.
 289 PRINTF_LIB =
 290 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 291 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 292
 293
 294 # Minimalistic scanf version
 295 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 296
 297 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 298 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 299
 300 # If this is left blank, then it will use the Standard scanf version.
 301 SCANF_LIB =
 302 #SCANF_LIB = $(SCANF_LIB_MIN)
 303 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 304
 305
 306 MATH_LIB = -lm
 307
 308
 309 # List any extra directories to look for libraries here.
 310 #     Each directory must be seperated by a space.
 311 #     Use forward slashes for directory separators.
 312 #     For a directory that has spaces, enclose it in quotes.
 313 EXTRALIBDIRS =
 314
 315
 316
 317 #---------------- External Memory Options ----------------
 318
 319 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 320 # used for variables (.data/.bss) and heap (malloc()).
 321 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 322
 323 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 324 # only used for heap (malloc()).
 325 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 326
 327 EXTMEMOPTS =
 328
 329
 330
 331 #---------------- Linker Options ----------------
 332 #  -Wl,...:     tell GCC to pass this to linker.
 333 #    -Map:      create map file
 334 #    --cref:    add cross reference to  map file
 335 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 336 LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
 337 LDFLAGS += -Wl,--relax
 338 LDFLAGS += -Wl,--gc-sections
 339 LDFLAGS += $(EXTMEMOPTS)
 340 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 341 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 342 #LDFLAGS += -T linker_script.x
 343
 344
 345
 346 #---------------- Programming Options (avrdude) ----------------
 347
 348 # Programming hardware
 349 # Type: avrdude -c ?
 350 # to get a full listing.
 351 #
 352 AVRDUDE_PROGRAMMER = jtagmkII
 353
 354 # com1 = serial port. Use lpt1 to connect to parallel port.
 355 AVRDUDE_PORT = usb
 356
 357 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 358 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 359
 360
 361 # Uncomment the following if you want avrdude's erase cycle counter.
 362 # Note that this counter needs to be initialized first using -Yn,
 363 # see avrdude manual.
 364 #AVRDUDE_ERASE_COUNTER = -y
 365
 366 # Uncomment the following if you do /not/ wish a verification to be
 367 # performed after programming the device.
 368 #AVRDUDE_NO_VERIFY = -V
 369
 370 # Increase verbosity level.  Please use this when submitting bug
 371 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 372 # to submit bug reports.
 373 #AVRDUDE_VERBOSE = -v -v
 374
 375 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 376 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 377 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 378 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 379
 380
 381
 382 #---------------- Debugging Options ----------------
 383
 384 # For simulavr only - target MCU frequency.
 385 DEBUG_MFREQ = $(F_CPU)
 386
 387 # Set the DEBUG_UI to either gdb or insight.
 388 # DEBUG_UI = gdb
 389 DEBUG_UI = insight
 390
 391 # Set the debugging back-end to either avarice, simulavr.
 392 DEBUG_BACKEND = avarice
 393 #DEBUG_BACKEND = simulavr
 394
 395 # GDB Init Filename.
 396 GDBINIT_FILE = __avr_gdbinit
 397
 398 # When using avarice settings for the JTAG
 399 JTAG_DEV = /dev/com1
 400
 401 # Debugging port used to communicate between GDB / avarice / simulavr.
 402 DEBUG_PORT = 4242
 403
 404 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 405 #     just set to localhost unless doing some sort of crazy debugging when
 406 #     avarice is running on a different computer.
 407 DEBUG_HOST = localhost
 408
 409
 410
 411 #============================================================================
 412
 413
 414 # Define programs and commands.
 415 SHELL = sh
 416 CC = avr-gcc
 417 OBJCOPY = avr-objcopy
 418 OBJDUMP = avr-objdump
 419 SIZE = avr-size
 420 AR = avr-ar rcs
 421 NM = avr-nm
 422 AVRDUDE = avrdude
 423 REMOVE = rm -f
 424 REMOVEDIR = rm -rf
 425 COPY = cp
 426 WINSHELL = cmd
 427
 428
 429 # Define Messages
 430 # English
 431 MSG_ERRORS_NONE = Errors: none
 432 MSG_BEGIN = -------- begin --------
 433 MSG_END = --------  end  --------
 434 MSG_SIZE_BEFORE = Size before:
 435 MSG_SIZE_AFTER = Size after:
 436 MSG_COFF = Converting to AVR COFF:
 437 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 438 MSG_FLASH = Creating load file for Flash:
 439 MSG_EEPROM = Creating load file for EEPROM:
 440 MSG_EXTENDED_LISTING = Creating Extended Listing:
 441 MSG_SYMBOL_TABLE = Creating Symbol Table:
 442 MSG_LINKING = Linking:
 443 MSG_COMPILING = Compiling C:
 444 MSG_COMPILING_CPP = Compiling C++:
 445 MSG_ASSEMBLING = Assembling:
 446 MSG_CLEANING = Cleaning project:
 447 MSG_CREATING_LIBRARY = Creating library:
 448
 449
 450
 451
 452 # Define all object files.
 453 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 454
 455 # Define all listing files.
 456 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 457
 458
 459 # Compiler flags to generate dependency files.
 460 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 461
 462
 463 # Combine all necessary flags and optional flags.
 464 # Add target processor to flags.
 465 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 466 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 467 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 468
 469
 470
 471
 472
 473 # Default target.
 474 all: begin gccversion sizebefore build sizeafter end
 475
 476 # Change the build target to build a HEX file or a library.
 477 build: elf hex eep lss sym
 478 #build: lib
 479
 480
 481 elf: $(TARGET).elf
 482 hex: $(TARGET).hex
 483 eep: $(TARGET).eep
 484 lss: $(TARGET).lss
 485 sym: $(TARGET).sym
 486 LIBNAME=lib$(TARGET).a
 487 lib: $(LIBNAME)
 488
 489
 490
 491 # Eye candy.
 492 # AVR Studio 3.x does not check make's exit code but relies on
 493 # the following magic strings to be generated by the compile job.
 494 begin:
 495         @echo
 496         @echo $(MSG_BEGIN)
 497
 498 end:
 499         @echo $(MSG_END)
 500         @echo
 501
 502
 503 # Display size of file.
 504 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 505 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 506 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 507 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 508
 509
 510 sizebefore:
 511         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 512         2>/dev/null; echo; fi
 513
 514 sizeafter:
 515         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 516         2>/dev/null; echo; fi
 517
 518
 519
 520 # Display compiler version information.
 521 gccversion :
 522         @$(CC) --version
 523
 524
 525 # Program the device.
 526 program: $(TARGET).hex $(TARGET).eep
 527         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 528
 529
 530 # Generate avr-gdb config/init file which does the following:
 531 #     define the reset signal, load the target file, connect to target, and set
 532 #     a breakpoint at main().
 533 gdb-config:
 534         @$(REMOVE) $(GDBINIT_FILE)
 535         @echo define reset >> $(GDBINIT_FILE)
 536         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 537         @echo end >> $(GDBINIT_FILE)
 538         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 539         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 540 ifeq ($(DEBUG_BACKEND),simulavr)
 541         @echo load  >> $(GDBINIT_FILE)
 542 endif
 543         @echo break main >> $(GDBINIT_FILE)
 544
 545 debug: gdb-config $(TARGET).elf
 546 ifeq ($(DEBUG_BACKEND), avarice)
 547         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 548         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 549         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 550         @$(WINSHELL) /c pause
 551
 552 else
 553         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 554         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 555 endif
 556         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 557
 558
 559
 560
 561 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 562 COFFCONVERT = $(OBJCOPY) --debugging
 563 COFFCONVERT += --change-section-address .data-0x800000
 564 COFFCONVERT += --change-section-address .bss-0x800000
 565 COFFCONVERT += --change-section-address .noinit-0x800000
 566 COFFCONVERT += --change-section-address .eeprom-0x810000
 567
 568
 569
 570 coff: $(TARGET).elf
 571         @echo
 572         @echo $(MSG_COFF) $(TARGET).cof
 573         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 574
 575
 576 extcoff: $(TARGET).elf
 577         @echo
 578         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 579         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 580
 581
 582
 583 # Create final output files (.hex, .eep) from ELF output file.
 584 %.hex: %.elf
 585         @echo
 586         @echo $(MSG_FLASH) $@
 587         $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 588
 589 %.eep: %.elf
 590         @echo
 591         @echo $(MSG_EEPROM) $@
 592         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 593         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 594
 595 # Create extended listing file from ELF output file.
 596 %.lss: %.elf
 597         @echo
 598         @echo $(MSG_EXTENDED_LISTING) $@
 599         $(OBJDUMP) -h -S -z $< > $@
 600
 601 # Create a symbol table from ELF output file.
 602 %.sym: %.elf
 603         @echo
 604         @echo $(MSG_SYMBOL_TABLE) $@
 605         $(NM) -n $< > $@
 606
 607
 608
 609 # Create library from object files.
 610 .SECONDARY : $(TARGET).a
 611 .PRECIOUS : $(OBJ)
 612 %.a: $(OBJ)
 613         @echo
 614         @echo $(MSG_CREATING_LIBRARY) $@
 615         $(AR) $@ $(OBJ)
 616
 617
 618 # Link: create ELF output file from object files.
 619 .SECONDARY : $(TARGET).elf
 620 .PRECIOUS : $(OBJ)
 621 %.elf: $(OBJ)
 622         @echo
 623         @echo $(MSG_LINKING) $@
 624         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 625
 626
 627 # Compile: create object files from C source files.
 628 $(OBJDIR)/%.o : %.c
 629         @echo
 630         @echo $(MSG_COMPILING) $<
 631         $(CC) -c $(ALL_CFLAGS) $< -o $@
 632
 633
 634 # Compile: create object files from C++ source files.
 635 $(OBJDIR)/%.o : %.cpp
 636         @echo
 637         @echo $(MSG_COMPILING_CPP) $<
 638         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 639
 640
 641 # Compile: create assembler files from C source files.
 642 %.s : %.c
 643         $(CC) -S $(ALL_CFLAGS) $< -o $@
 644
 645
 646 # Compile: create assembler files from C++ source files.
 647 %.s : %.cpp
 648         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 649
 650
 651 # Assemble: create object files from assembler source files.
 652 $(OBJDIR)/%.o : %.S
 653         @echo
 654         @echo $(MSG_ASSEMBLING) $<
 655         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 656
 657
 658 # Create preprocessed source for use in sending a bug report.
 659 %.i : %.c
 660         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 661
 662
 663 # Target: clean project.
 664 clean: begin clean_list end
 665
 666 clean_list :
 667         @echo
 668         @echo $(MSG_CLEANING)
 669         $(REMOVE) $(TARGET).hex
 670         $(REMOVE) $(TARGET).eep
 671         $(REMOVE) $(TARGET).cof
 672         $(REMOVE) $(TARGET).elf
 673         $(REMOVE) $(TARGET).map
 674         $(REMOVE) $(TARGET).sym
 675         $(REMOVE) $(TARGET).lss
 676         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 677         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 678         $(REMOVE) $(SRC:.c=.s)
 679         $(REMOVE) $(SRC:.c=.d)
 680         $(REMOVE) $(SRC:.c=.i)
 681         $(REMOVEDIR) .dep
 682
 683 doxygen:
 684         @echo Generating Project Documentation...
 685         @doxygen Doxygen.conf
 686         @echo Documentation Generation Complete.
 687
 688 clean_doxygen:
 689         rm -rf Documentation
 690
 691 # Create object files directory
 692 $(shell mkdir $(OBJDIR) 2>/dev/null)
 693
 694
 695 # Include the dependency files.
 696 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 697
 698
 699 # Listing of phony targets.
 700 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 701 build elf hex eep lss sym coff extcoff doxygen clean          \
 702 clean_list clean_doxygen program debug gdb-config
 703