Demos/Device/ClassDriver/RNDISEthernet/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #     Typical values are:
  78 #         F_CPU =  1000000
  79 #         F_CPU =  1843200
  80 #         F_CPU =  2000000
  81 #         F_CPU =  3686400
  82 #         F_CPU =  4000000
  83 #         F_CPU =  7372800
  84 #         F_CPU =  8000000
  85 #         F_CPU = 11059200
  86 #         F_CPU = 14745600
  87 #         F_CPU = 16000000
  88 #         F_CPU = 18432000
  89 #         F_CPU = 20000000
  90 F_CPU = 8000000
  91
  92
  93 # Input clock frequency.
  94 #     This will define a symbol, F_CLOCK, in all source code files equal to the
  95 #     input clock frequency (before any prescaling is performed). This value may
  96 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  97 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  98 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  99 #     at the end, this will be done automatically to create a 32-bit value in your
 100 #     source code.
 101 #
 102 #     If no clock division is performed on the input clock inside the AVR (via the
 103 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 104 F_CLOCK = $(F_CPU)
 105
 106
 107 # Output format. (can be srec, ihex, binary)
 108 FORMAT = ihex
 109
 110
 111 # Target file name (without extension).
 112 TARGET = RNDISEthernet
 113
 114
 115 # Object files directory
 116 #     To put object files in current directory, use a dot (.), do NOT make
 117 #     this an empty or blank macro!
 118 OBJDIR = .
 119
 120
 121 # Path to the LUFA library
 122 LUFA_PATH = ../../../..
 123
 124
 125 # LUFA library compile-time options
 126 LUFA_OPTS  = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
 127 LUFA_OPTS += -D USB_DEVICE_ONLY
 128 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 129 LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1
 130 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 131 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 132
 133
 134 # List C source files here. (C dependencies are automatically generated.)
 135 SRC = $(TARGET).c                                                 \
 136       Descriptors.c                                               \
 137           Lib/Ethernet.c                                              \
 138           Lib/ProtocolDecoders.c                                      \
 139           Lib/ICMP.c                                                  \
 140           Lib/TCP.c                                                   \
 141           Lib/UDP.c                                                   \
 142           Lib/DHCP.c                                                  \
 143           Lib/ARP.c                                                   \
 144           Lib/IP.c                                                    \
 145           Lib/Webserver.c                                             \
 146           $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c         \
 147           $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 148           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 149           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 150           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
 151           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 152           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 153           $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
 154           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
 155           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 156           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
 157           $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 158           $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/RNDIS.c          \
 159
 160
 161 # List C++ source files here. (C dependencies are automatically generated.)
 162 CPPSRC =
 163
 164
 165 # List Assembler source files here.
 166 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 167 #     will not be considered source files but generated files (assembler
 168 #     output from the compiler), and will be deleted upon "make clean"!
 169 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 170 #     it will preserve the spelling of the filenames, and gcc itself does
 171 #     care about how the name is spelled on its command-line.
 172 ASRC =
 173
 174
 175 # Optimization level, can be [0, 1, 2, 3, s].
 176 #     0 = turn off optimization. s = optimize for size.
 177 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 178 OPT = s
 179
 180
 181 # Debugging format.
 182 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 183 #     AVR Studio 4.10 requires dwarf-2.
 184 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 185 DEBUG = dwarf-2
 186
 187
 188 # List any extra directories to look for include files here.
 189 #     Each directory must be seperated by a space.
 190 #     Use forward slashes for directory separators.
 191 #     For a directory that has spaces, enclose it in quotes.
 192 EXTRAINCDIRS = $(LUFA_PATH)/
 193
 194
 195 # Compiler flag to set the C Standard level.
 196 #     c89   = "ANSI" C
 197 #     gnu89 = c89 plus GCC extensions
 198 #     c99   = ISO C99 standard (not yet fully implemented)
 199 #     gnu99 = c99 plus GCC extensions
 200 CSTANDARD = -std=gnu99
 201
 202
 203 # Place -D or -U options here for C sources
 204 CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 205 CDEFS += -DNO_DECODE_ETHERNET -DNO_DECODE_ARP -DNO_DECODE_ICMP -DNO_DECODE_IP -DNO_DECODE_TCP -DNO_DECODE_UDP -DNO_DECODE_DHCP
 206
 207
 208 # Place -D or -U options here for ASM sources
 209 ADEFS = -DF_CPU=$(F_CPU)
 210
 211
 212 # Place -D or -U options here for C++ sources
 213 CPPDEFS = -DF_CPU=$(F_CPU)UL
 214 #CPPDEFS += -D__STDC_LIMIT_MACROS
 215 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 216
 217
 218
 219 #---------------- Compiler Options C ----------------
 220 #  -g*:          generate debugging information
 221 #  -O*:          optimization level
 222 #  -f...:        tuning, see GCC manual and avr-libc documentation
 223 #  -Wall...:     warning level
 224 #  -Wa,...:      tell GCC to pass this to the assembler.
 225 #    -adhlns...: create assembler listing
 226 CFLAGS = -g$(DEBUG)
 227 CFLAGS += $(CDEFS)
 228 CFLAGS += -O$(OPT)
 229 CFLAGS += -funsigned-char
 230 CFLAGS += -funsigned-bitfields
 231 CFLAGS += -ffunction-sections
 232 CFLAGS += -fpack-struct
 233 CFLAGS += -fshort-enums
 234 CFLAGS += -finline-limit=20
 235 CFLAGS += -Wall
 236 CFLAGS += -Wstrict-prototypes
 237 CFLAGS += -Wundef
 238 #CFLAGS += -fno-unit-at-a-time
 239 #CFLAGS += -Wunreachable-code
 240 #CFLAGS += -Wsign-compare
 241 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 242 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 243 CFLAGS += $(CSTANDARD)
 244
 245
 246 #---------------- Compiler Options C++ ----------------
 247 #  -g*:          generate debugging information
 248 #  -O*:          optimization level
 249 #  -f...:        tuning, see GCC manual and avr-libc documentation
 250 #  -Wall...:     warning level
 251 #  -Wa,...:      tell GCC to pass this to the assembler.
 252 #    -adhlns...: create assembler listing
 253 CPPFLAGS = -g$(DEBUG)
 254 CPPFLAGS += $(CPPDEFS)
 255 CPPFLAGS += -O$(OPT)
 256 CPPFLAGS += -funsigned-char
 257 CPPFLAGS += -funsigned-bitfields
 258 CPPFLAGS += -fpack-struct
 259 CPPFLAGS += -fshort-enums
 260 CPPFLAGS += -fno-exceptions
 261 CPPFLAGS += -Wall
 262 CFLAGS += -Wundef
 263 #CPPFLAGS += -mshort-calls
 264 #CPPFLAGS += -fno-unit-at-a-time
 265 #CPPFLAGS += -Wstrict-prototypes
 266 #CPPFLAGS += -Wunreachable-code
 267 #CPPFLAGS += -Wsign-compare
 268 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 269 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 270 #CPPFLAGS += $(CSTANDARD)
 271
 272
 273 #---------------- Assembler Options ----------------
 274 #  -Wa,...:   tell GCC to pass this to the assembler.
 275 #  -adhlns:   create listing
 276 #  -gstabs:   have the assembler create line number information; note that
 277 #             for use in COFF files, additional information about filenames
 278 #             and function names needs to be present in the assembler source
 279 #             files -- see avr-libc docs [FIXME: not yet described there]
 280 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 281 #       dump that will be displayed for a given single line of source input.
 282 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 283
 284
 285 #---------------- Library Options ----------------
 286 # Minimalistic printf version
 287 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 288
 289 # Floating point printf version (requires MATH_LIB = -lm below)
 290 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 291
 292 # If this is left blank, then it will use the Standard printf version.
 293 PRINTF_LIB =
 294 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 295 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 296
 297
 298 # Minimalistic scanf version
 299 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 300
 301 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 302 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 303
 304 # If this is left blank, then it will use the Standard scanf version.
 305 SCANF_LIB =
 306 #SCANF_LIB = $(SCANF_LIB_MIN)
 307 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 308
 309
 310 MATH_LIB = -lm
 311
 312
 313 # List any extra directories to look for libraries here.
 314 #     Each directory must be seperated by a space.
 315 #     Use forward slashes for directory separators.
 316 #     For a directory that has spaces, enclose it in quotes.
 317 EXTRALIBDIRS =
 318
 319
 320
 321 #---------------- External Memory Options ----------------
 322
 323 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 324 # used for variables (.data/.bss) and heap (malloc()).
 325 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 326
 327 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 328 # only used for heap (malloc()).
 329 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 330
 331 EXTMEMOPTS =
 332
 333
 334
 335 #---------------- Linker Options ----------------
 336 #  -Wl,...:     tell GCC to pass this to linker.
 337 #    -Map:      create map file
 338 #    --cref:    add cross reference to  map file
 339 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 340 LDFLAGS += -Wl,--relax
 341 LDFLAGS += -Wl,--gc-sections
 342 LDFLAGS += $(EXTMEMOPTS)
 343 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 344 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 345 #LDFLAGS += -T linker_script.x
 346
 347
 348
 349 #---------------- Programming Options (avrdude) ----------------
 350
 351 # Programming hardware: alf avr910 avrisp bascom bsd
 352 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 353 #
 354 # Type: avrdude -c ?
 355 # to get a full listing.
 356 #
 357 AVRDUDE_PROGRAMMER = jtagmkII
 358
 359 # com1 = serial port. Use lpt1 to connect to parallel port.
 360 AVRDUDE_PORT = usb
 361
 362 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 363 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 364
 365
 366 # Uncomment the following if you want avrdude's erase cycle counter.
 367 # Note that this counter needs to be initialized first using -Yn,
 368 # see avrdude manual.
 369 #AVRDUDE_ERASE_COUNTER = -y
 370
 371 # Uncomment the following if you do /not/ wish a verification to be
 372 # performed after programming the device.
 373 #AVRDUDE_NO_VERIFY = -V
 374
 375 # Increase verbosity level.  Please use this when submitting bug
 376 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 377 # to submit bug reports.
 378 #AVRDUDE_VERBOSE = -v -v
 379
 380 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 381 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 382 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 383 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 384
 385
 386
 387 #---------------- Debugging Options ----------------
 388
 389 # For simulavr only - target MCU frequency.
 390 DEBUG_MFREQ = $(F_CPU)
 391
 392 # Set the DEBUG_UI to either gdb or insight.
 393 # DEBUG_UI = gdb
 394 DEBUG_UI = insight
 395
 396 # Set the debugging back-end to either avarice, simulavr.
 397 DEBUG_BACKEND = avarice
 398 #DEBUG_BACKEND = simulavr
 399
 400 # GDB Init Filename.
 401 GDBINIT_FILE = __avr_gdbinit
 402
 403 # When using avarice settings for the JTAG
 404 JTAG_DEV = /dev/com1
 405
 406 # Debugging port used to communicate between GDB / avarice / simulavr.
 407 DEBUG_PORT = 4242
 408
 409 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 410 #     just set to localhost unless doing some sort of crazy debugging when
 411 #     avarice is running on a different computer.
 412 DEBUG_HOST = localhost
 413
 414
 415
 416 #============================================================================
 417
 418
 419 # Define programs and commands.
 420 SHELL = sh
 421 CC = avr-gcc
 422 OBJCOPY = avr-objcopy
 423 OBJDUMP = avr-objdump
 424 SIZE = avr-size
 425 AR = avr-ar rcs
 426 NM = avr-nm
 427 AVRDUDE = avrdude
 428 REMOVE = rm -f
 429 REMOVEDIR = rm -rf
 430 COPY = cp
 431 WINSHELL = cmd
 432
 433 # Define Messages
 434 # English
 435 MSG_ERRORS_NONE = Errors: none
 436 MSG_BEGIN = -------- begin --------
 437 MSG_END = --------  end  --------
 438 MSG_SIZE_BEFORE = Size before:
 439 MSG_SIZE_AFTER = Size after:
 440 MSG_COFF = Converting to AVR COFF:
 441 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 442 MSG_FLASH = Creating load file for Flash:
 443 MSG_EEPROM = Creating load file for EEPROM:
 444 MSG_EXTENDED_LISTING = Creating Extended Listing:
 445 MSG_SYMBOL_TABLE = Creating Symbol Table:
 446 MSG_LINKING = Linking:
 447 MSG_COMPILING = Compiling C:
 448 MSG_COMPILING_CPP = Compiling C++:
 449 MSG_ASSEMBLING = Assembling:
 450 MSG_CLEANING = Cleaning project:
 451 MSG_CREATING_LIBRARY = Creating library:
 452
 453
 454
 455
 456 # Define all object files.
 457 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 458
 459 # Define all listing files.
 460 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 461
 462
 463 # Compiler flags to generate dependency files.
 464 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 465
 466
 467 # Combine all necessary flags and optional flags.
 468 # Add target processor to flags.
 469 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 470 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 471 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 472
 473
 474
 475
 476
 477 # Default target.
 478 all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
 479
 480 # Change the build target to build a HEX file or a library.
 481 build: elf hex eep lss sym
 482 #build: lib
 483
 484
 485 elf: $(TARGET).elf
 486 hex: $(TARGET).hex
 487 eep: $(TARGET).eep
 488 lss: $(TARGET).lss
 489 sym: $(TARGET).sym
 490 LIBNAME=lib$(TARGET).a
 491 lib: $(LIBNAME)
 492
 493
 494
 495 # Eye candy.
 496 # AVR Studio 3.x does not check make's exit code but relies on
 497 # the following magic strings to be generated by the compile job.
 498 begin:
 499         @echo
 500         @echo $(MSG_BEGIN)
 501
 502 end:
 503         @echo $(MSG_END)
 504         @echo
 505
 506
 507 # Display size of file.
 508 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 509 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 510 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 511 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 512
 513 sizebefore:
 514         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 515         2>/dev/null; echo; fi
 516
 517 sizeafter:
 518         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 519         2>/dev/null; echo; fi
 520
 521 checkhooks: build
 522         @echo
 523         @echo ------- Unhooked LUFA Events -------
 524         @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
 525                    cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 526                            echo "(None)"
 527         @echo ------------------------------------
 528
 529 checklibmode:
 530         @echo
 531         @echo ----------- Library Mode -----------
 532         @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
 533                   | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
 534                   || echo "No specific mode (both device and host mode allowable)."
 535         @echo ------------------------------------
 536
 537 checkboard:
 538         @echo
 539         @echo ---------- Selected Board ----------
 540         @echo Selected board model is $(BOARD).
 541         @echo ------------------------------------
 542
 543 # Display compiler version information.
 544 gccversion :
 545         @$(CC) --version
 546
 547
 548
 549 # Program the device.
 550 program: $(TARGET).hex $(TARGET).eep
 551         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 552
 553 flip: $(TARGET).hex
 554         batchisp -hardware usb -device $(MCU) -operation erase f
 555         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 556         batchisp -hardware usb -device $(MCU) -operation start reset 0
 557
 558 dfu: $(TARGET).hex
 559         dfu-programmer $(MCU) erase
 560         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 561         dfu-programmer $(MCU) reset
 562
 563 flip-ee: $(TARGET).hex $(TARGET).eep
 564         copy $(TARGET).eep $(TARGET)eep.hex
 565         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 566         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 567         batchisp -hardware usb -device $(MCU) -operation start reset 0
 568
 569 dfu-ee: $(TARGET).hex $(TARGET).eep
 570         dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
 571         dfu-programmer $(MCU) reset
 572
 573
 574 # Generate avr-gdb config/init file which does the following:
 575 #     define the reset signal, load the target file, connect to target, and set
 576 #     a breakpoint at main().
 577 gdb-config:
 578         @$(REMOVE) $(GDBINIT_FILE)
 579         @echo define reset >> $(GDBINIT_FILE)
 580         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 581         @echo end >> $(GDBINIT_FILE)
 582         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 583         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 584 ifeq ($(DEBUG_BACKEND),simulavr)
 585         @echo load  >> $(GDBINIT_FILE)
 586 endif
 587         @echo break main >> $(GDBINIT_FILE)
 588
 589 debug: gdb-config $(TARGET).elf
 590 ifeq ($(DEBUG_BACKEND), avarice)
 591         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 592         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 593         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 594         @$(WINSHELL) /c pause
 595
 596 else
 597         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 598         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 599 endif
 600         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 601
 602
 603
 604
 605 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 606 COFFCONVERT = $(OBJCOPY) --debugging
 607 COFFCONVERT += --change-section-address .data-0x800000
 608 COFFCONVERT += --change-section-address .bss-0x800000
 609 COFFCONVERT += --change-section-address .noinit-0x800000
 610 COFFCONVERT += --change-section-address .eeprom-0x810000
 611
 612
 613
 614 coff: $(TARGET).elf
 615         @echo
 616         @echo $(MSG_COFF) $(TARGET).cof
 617         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 618
 619
 620 extcoff: $(TARGET).elf
 621         @echo
 622         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 623         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 624
 625
 626
 627 # Create final output files (.hex, .eep) from ELF output file.
 628 %.hex: %.elf
 629         @echo
 630         @echo $(MSG_FLASH) $@
 631         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 632
 633 %.eep: %.elf
 634         @echo
 635         @echo $(MSG_EEPROM) $@
 636         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 637         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 638
 639 # Create extended listing file from ELF output file.
 640 %.lss: %.elf
 641         @echo
 642         @echo $(MSG_EXTENDED_LISTING) $@
 643         $(OBJDUMP) -h -z -S $< > $@
 644
 645 # Create a symbol table from ELF output file.
 646 %.sym: %.elf
 647         @echo
 648         @echo $(MSG_SYMBOL_TABLE) $@
 649         $(NM) -n $< > $@
 650
 651
 652
 653 # Create library from object files.
 654 .SECONDARY : $(TARGET).a
 655 .PRECIOUS : $(OBJ)
 656 %.a: $(OBJ)
 657         @echo
 658         @echo $(MSG_CREATING_LIBRARY) $@
 659         $(AR) $@ $(OBJ)
 660
 661
 662 # Link: create ELF output file from object files.
 663 .SECONDARY : $(TARGET).elf
 664 .PRECIOUS : $(OBJ)
 665 %.elf: $(OBJ)
 666         @echo
 667         @echo $(MSG_LINKING) $@
 668         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 669
 670
 671 # Compile: create object files from C source files.
 672 $(OBJDIR)/%.o : %.c
 673         @echo
 674         @echo $(MSG_COMPILING) $<
 675         $(CC) -c $(ALL_CFLAGS) $< -o $@
 676
 677
 678 # Compile: create object files from C++ source files.
 679 $(OBJDIR)/%.o : %.cpp
 680         @echo
 681         @echo $(MSG_COMPILING_CPP) $<
 682         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 683
 684
 685 # Compile: create assembler files from C source files.
 686 %.s : %.c
 687         $(CC) -S $(ALL_CFLAGS) $< -o $@
 688
 689
 690 # Compile: create assembler files from C++ source files.
 691 %.s : %.cpp
 692         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 693
 694
 695 # Assemble: create object files from assembler source files.
 696 $(OBJDIR)/%.o : %.S
 697         @echo
 698         @echo $(MSG_ASSEMBLING) $<
 699         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 700
 701
 702 # Create preprocessed source for use in sending a bug report.
 703 %.i : %.c
 704         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 705
 706
 707 # Target: clean project.
 708 clean: begin clean_list clean_binary end
 709
 710 clean_binary:
 711         $(REMOVE) $(TARGET).hex
 712
 713 clean_list:
 714         @echo $(MSG_CLEANING)
 715         $(REMOVE) $(TARGET).eep
 716         $(REMOVE) $(TARGET)eep.hex
 717         $(REMOVE) $(TARGET).cof
 718         $(REMOVE) $(TARGET).elf
 719         $(REMOVE) $(TARGET).map
 720         $(REMOVE) $(TARGET).sym
 721         $(REMOVE) $(TARGET).lss
 722         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 723         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 724         $(REMOVE) $(SRC:.c=.s)
 725         $(REMOVE) $(SRC:.c=.d)
 726         $(REMOVE) $(SRC:.c=.i)
 727         $(REMOVEDIR) .dep
 728
 729
 730 doxygen:
 731         @echo Generating Project Documentation...
 732         @doxygen Doxygen.conf
 733         @echo Documentation Generation Complete.
 734
 735 clean_doxygen:
 736         rm -rf Documentation
 737
 738 # Create object files directory
 739 $(shell mkdir $(OBJDIR) 2>/dev/null)
 740
 741
 742 # Include the dependency files.
 743 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 744
 745
 746 # Listing of phony targets.
 747 .PHONY : all checkhooks checklibmode checkboard   \
 748 begin finish end sizebefore sizeafter gccversion  \
 749 build elf hex eep lss sym coff extcoff clean      \
 750 clean_list clean_binary program debug gdb-config  \
 751 doxygen dfu flip flip-ee dfu-ee