LUFA/Drivers/USB/Class/Host/HIDClassHost.h

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2012.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *  \brief Host mode driver for the library USB HID Class driver.
  33  *
  34  *  Host mode driver for the library USB HID Class driver.
  35  *
  36  *  \note This file should not be included directly. It is automatically included as needed by the USB module driver
  37  *        dispatch header located in LUFA/Drivers/USB.h.
  38  */
  39
  40 /** \ingroup Group_USBClassHID
  41  *  \defgroup Group_USBClassHIDHost HID Class Host Mode Driver
  42  *
  43  *  \section Sec_Dependencies Module Source Dependencies
  44  *  The following files must be built with any user project that uses this module:
  45  *    - LUFA/Drivers/USB/Class/Host/HIDClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  46  *
  47  *  \section Sec_ModDescription Module Description
  48  *  Host Mode USB Class driver framework interface, for the HID USB Class driver.
  49  *
  50  *  @{
  51  */
  52
  53 #ifndef __HID_CLASS_HOST_H__
  54 #define __HID_CLASS_HOST_H__
  55
  56         /* Includes: */
  57                 #include "../../USB.h"
  58                 #include "../Common/HIDClassCommon.h"
  59
  60         /* Enable C linkage for C++ Compilers: */
  61                 #if defined(__cplusplus)
  62                         extern "C" {
  63                 #endif
  64
  65         /* Preprocessor Checks: */
  66                 #if !defined(__INCLUDE_FROM_HID_DRIVER)
  67                         #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
  68                 #endif
  69
  70         /* Public Interface - May be used in end-application: */
  71                 /* Macros: */
  72                         /** Error code for some HID Host functions, indicating a logical (and not hardware) error. */
  73                         #define HID_ERROR_LOGICAL              0x80
  74
  75                 /* Type Defines: */
  76                         /** \brief HID Class Host Mode Configuration and State Structure.
  77                          *
  78                          *  Class state structure. An instance of this structure should be made within the user application,
  79                          *  and passed to each of the HID class driver functions as the \c HIDInterfaceInfo parameter. This
  80                          *  stores each HID interface's configuration and state information.
  81                          */
  82                         typedef struct
  83                         {
  84                                 struct
  85                                 {
  86                                         uint8_t  DataINPipeNumber; /**< Pipe number of the HID interface's IN data pipe. */
  87                                         bool     DataINPipeDoubleBank; /**< Indicates if the HID interface's IN data pipe should use double banking. */
  88
  89                                         uint8_t  DataOUTPipeNumber; /**< Pipe number of the HID interface's OUT data pipe. */
  90                                         bool     DataOUTPipeDoubleBank; /**< Indicates if the HID interface's OUT data pipe should use double banking. */
  91
  92                                         uint8_t  HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific
  93                                                                         *   boot subclass protocol is required, a protocol value from the
  94                                                                         *   \ref HID_Descriptor_ClassSubclassProtocol_t enum.
  95                                                                         */
  96                                         #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
  97                                         HID_ReportInfo_t* HIDParserData; /**< HID parser data to store the parsed HID report data, when boot protocol
  98                                                                           *   is not used.
  99                                                                                                           *
 100                                                                           *  \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined,
 101                                                                           *        this method is unavailable.
 102                                                                           */
 103                                         #endif
 104                                 } Config; /**< Config data for the USB class interface within the device. All elements in this section
 105                                            *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.
 106                                            */
 107                                 struct
 108                                 {
 109                                         bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
 110                                                         *   after \ref HID_Host_ConfigurePipes() is called and the Host state machine is in the
 111                                                         *   Configured state.
 112                                                         */
 113                                         uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device. */
 114
 115                                         uint16_t DataINPipeSize; /**< Size in bytes of the HID interface's IN data pipe. */
 116                                         uint16_t DataOUTPipeSize;  /**< Size in bytes of the HID interface's OUT data pipe. */
 117
 118                                         bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot
 119                                                                     *   Protocol when enabled via \ref HID_Host_SetBootProtocol().
 120                                                                     */
 121                                         bool DeviceUsesOUTPipe; /**< Indicates if the current interface instance uses a separate OUT data pipe for
 122                                                                  *   OUT reports, or if OUT reports are sent via the control pipe instead.
 123                                                                  */
 124                                         bool UsingBootProtocol; /**< Indicates that the interface is currently initialized in Boot Protocol mode */
 125                                         uint16_t HIDReportSize; /**< Size in bytes of the HID report descriptor in the device. */
 126
 127                                         uint8_t LargestReportSize; /**< Largest report the device will send, in bytes. */
 128                                 } State; /**< State data for the USB class interface within the device. All elements in this section
 129                                                   *   <b>may</b> be set to initial values, but may also be ignored to default to sane values when
 130                                                   *   the interface is enumerated.
 131                                                   */
 132                         } USB_ClassInfo_HID_Host_t;
 133
 134                 /* Enums: */
 135                         /** Enum for the possible error codes returned by the \ref HID_Host_ConfigurePipes() function. */
 136                         enum HID_Host_EnumerationFailure_ErrorCodes_t
 137                         {
 138                                 HID_ENUMERROR_NoError                    = 0, /**< Configuration Descriptor was processed successfully. */
 139                                 HID_ENUMERROR_InvalidConfigDescriptor    = 1, /**< The device returned an invalid Configuration Descriptor. */
 140                                 HID_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible HID interface was not found in the device's Configuration Descriptor. */
 141                                 HID_ENUMERROR_PipeConfigurationFailed    = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
 142                         };
 143
 144                 /* Function Prototypes: */
 145                         /** Host interface configuration routine, to configure a given HID host interface instance using the Configuration
 146                          *  Descriptor read from an attached USB device. This function automatically updates the given HID Host instance's
 147                          *  state values and configures the pipes required to communicate with the interface if it is found within the
 148                          *  device. This should be called once after the stack has enumerated the attached device, while the host state
 149                          *  machine is in the Addressed state.
 150                          *
 151                          *  \attention Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
 152                          *             to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
 153                          *
 154                          *  \param[in,out] HIDInterfaceInfo      Pointer to a structure containing a HID Class host configuration and state.
 155                          *  \param[in]     ConfigDescriptorSize  Length of the attached device's Configuration Descriptor.
 156                          *  \param[in]     ConfigDescriptorData  Pointer to a buffer containing the attached device's Configuration Descriptor.
 157                          *
 158                          *  \return A value from the \ref HID_Host_EnumerationFailure_ErrorCodes_t enum.
 159                          */
 160                         uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
 161                                                         uint16_t ConfigDescriptorSize,
 162                                                         void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
 163
 164
 165                         /** Receives a HID IN report from the attached HID device, when a report has been received on the HID IN Data pipe.
 166                          *
 167                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 168                          *       call will fail.
 169                          *
 170                          *  \attention The destination buffer should be large enough to accommodate the largest report that the attached device
 171                          *             can generate.
 172                          *
 173                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 174                          *  \param[in]     Buffer            Buffer to store the received report into.
 175                          *
 176                          *  \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
 177                          */
 178                         uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
 179                                                        void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 180
 181                         #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
 182                         /** Receives a HID IN report from the attached device, by the report ID.
 183                          *
 184                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 185                          *       call will fail.
 186                          *
 187                          *  \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
 188                          *
 189                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 190                          *  \param[in]     ReportID          Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch.
 191                          *  \param[in]     Buffer            Buffer to store the received report into.
 192                          *
 193                          *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
 194                          */
 195                         uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
 196                                                            const uint8_t ReportID,
 197                                                            void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
 198                         #endif
 199
 200                         /** Sends an OUT or FEATURE report to the currently attached HID device, using the device's OUT pipe if available,
 201                          *  or the device's Control pipe if not.
 202                          *
 203                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 204                          *       call will fail.
 205                          *
 206                          *  \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, the ReportID parameter is removed
 207                          *        from the parameter list of this function.
 208                          *
 209                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 210                          *  \param[in]     ReportID          Report ID of the report to send to the device, or 0 if the device does not use report IDs.
 211                          *  \param[in]     ReportType        Type of report to issue to the device, either \ref HID_REPORT_ITEM_Out or \ref HID_REPORT_ITEM_Feature.
 212                          *  \param[in]     Buffer            Buffer containing the report to send to the attached device.
 213                          *  \param[in]     ReportSize        Report size in bytes to send to the attached device.
 214                          *
 215                          *  \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in
 216                          *          the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise.
 217                          */
 218                         uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
 219                         #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
 220                                                         const uint8_t ReportID,
 221                         #endif
 222                                                         const uint8_t ReportType,
 223                                                         void* Buffer,
 224                                                         const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1)
 225                         #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
 226                                                         ATTR_NON_NULL_PTR_ARG(4);
 227                         #else
 228                                                         ATTR_NON_NULL_PTR_ARG(3);
 229                         #endif
 230
 231                         /** Determines if a HID IN report has been received from the attached device on the data IN pipe.
 232                          *
 233                          *  \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
 234                          *       call will fail.
 235                          *
 236                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 237                          *
 238                          *  \return Boolean \c true if a report has been received, \c false otherwise.
 239                          */
 240                         bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 241
 242                         /** Switches the attached HID device's reporting protocol over to the Boot Report protocol mode, on supported devices.
 243                          *
 244                          *  \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method must still be called
 245                          *        to explicitly place the attached device into boot protocol mode before use.
 246                          *
 247                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 248                          *
 249                          *  \return \ref HID_ERROR_LOGICAL if the device does not support Boot Protocol mode, a value from the
 250                          *          \ref USB_Host_SendControlErrorCodes_t enum otherwise.
 251                          */
 252                         uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 253
 254                         /** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate
 255                          *  at which the device should send a report, when no state changes have ocurred; i.e. on HID keyboards, this sets the
 256                          *  hardware key repeat interval.
 257                          *
 258                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 259                          *  \param[in]     MS                Idle period as a multiple of four milliseconds, zero to disable hardware repeats
 260                          *
 261                          *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
 262                          */
 263                         uint8_t HID_Host_SetIdlePeriod(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
 264                                                        const uint16_t MS) ATTR_NON_NULL_PTR_ARG(1);
 265
 266                         #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
 267                         /** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves
 268                          *  and parses the device's HID report descriptor, so that the size of each report can be determined in advance.
 269                          *
 270                          *  \attention Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
 271                          *             Report Parser this function references <b>must</b> be implemented in the user code.
 272                          *
 273                          *  \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
 274                          *
 275                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 276                          *
 277                          *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum if an error occurs while retrieving the HID
 278                          *          Report descriptor or the setting of the Report protocol, \ref HID_ERROR_LOGICAL if the HID interface does
 279                          *          not have a valid \ref HID_ReportInfo_t structure set in its configuration, a mask of \ref HID_ERROR_LOGICAL
 280                          *          and a value from the \ref HID_Parse_ErrorCodes_t otherwise.
 281                          */
 282                         uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 283                         #endif
 284
 285                 /* Inline Functions: */
 286                         /** General management task for a given Human Interface Class host class interface, required for the correct operation of
 287                          *  the interface. This should be called frequently in the main program loop, before the master USB management task
 288                          *  \ref USB_USBTask().
 289                          *
 290                          *  \param[in,out] HIDInterfaceInfo  Pointer to a structure containing a HID Class host configuration and state.
 291                          */
 292                         static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 293                         static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
 294                         {
 295                                 (void)HIDInterfaceInfo;
 296                         }
 297
 298         /* Private Interface - For use in library only: */
 299         #if !defined(__DOXYGEN__)
 300                 /* Function Prototypes: */
 301                         #if defined(__INCLUDE_FROM_HID_HOST_C)
 302                                 static uint8_t DCOMP_HID_Host_NextHIDInterface(void* const CurrentDescriptor)
 303                                                                                ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
 304                                 static uint8_t DCOMP_HID_Host_NextHIDDescriptor(void* const CurrentDescriptor)
 305                                                                                 ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
 306                                 static uint8_t DCOMP_HID_Host_NextHIDInterfaceEndpoint(void* const CurrentDescriptor)
 307                                                                                        ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
 308                         #endif
 309         #endif
 310
 311         /* Disable C linkage for C++ Compilers: */
 312                 #if defined(__cplusplus)
 313                         }
 314                 #endif
 315
 316 #endif
 317
 318 /** @} */
 319