Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2011.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaim all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Target-related functions for the TINY target's NVM module.
  34  */
  35
  36 #define  INCLUDE_FROM_TINYNVM_C
  37 #include "TINYNVM.h"
  38
  39 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
  40
  41 /** Sends the given pointer address to the target's TPI pointer register */
  42 static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
  43 {
  44         /* Send the given 16-bit address to the target, LSB first */
  45         XPROGTarget_SendByte(TPI_CMD_SSTPR | 0);
  46         XPROGTarget_SendByte(AbsoluteAddress & 0xFF);
  47         XPROGTarget_SendByte(TPI_CMD_SSTPR | 1);
  48         XPROGTarget_SendByte(AbsoluteAddress >> 8);
  49 }
  50
  51 /** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.
  52  *
  53  *  \param[in] Address  6-bit I/O address to write to in the target's I/O memory space
  54  */
  55 static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  56 {
  57         /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
  58          * two bits of the 6-bit address are shifted left once */
  59         XPROGTarget_SendByte(TPI_CMD_SIN | ((Address & 0x30) << 1) | (Address & 0x0F));
  60 }
  61
  62 /** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read.
  63  *
  64  *  \param[in] Address  6-bit I/O address to read from in the target's I/O memory space
  65  */
  66 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
  67 {
  68         /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
  69          * two bits of the 6-bit address are shifted left once */
  70         XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));
  71 }
  72
  73 /** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
  74  *
  75  *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
  76  */
  77 bool TINYNVM_WaitWhileNVMBusBusy(void)
  78 {
  79         /* Poll the STATUS register to check to see if NVM access has been enabled */
  80         for (;;)
  81         {
  82                 /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
  83                 XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
  84
  85                 uint8_t StatusRegister = XPROGTarget_ReceiveByte();
  86
  87                 /* We might have timed out waiting for the status register read response, check here */
  88                 if (TimeoutExpired)
  89                   return false;
  90
  91                 /* Check the status register read response to see if the NVM bus is enabled */
  92                 if (StatusRegister & TPI_STATUS_NVM)
  93                   return true;
  94         }
  95 }
  96
  97 /** Waits while the target's NVM controller is busy performing an operation, exiting if the
  98  *  timeout period expires.
  99  *
 100  *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
 101  */
 102 bool TINYNVM_WaitWhileNVMControllerBusy(void)
 103 {
 104         /* Poll the STATUS register to check to see if NVM access has been enabled */
 105         for (;;)
 106         {
 107                 /* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
 108                 TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);
 109
 110                 uint8_t StatusRegister = XPROGTarget_ReceiveByte();
 111
 112                 /* We might have timed out waiting for the status register read response, check here */
 113                 if (TimeoutExpired)
 114                   return false;
 115
 116                 /* Check to see if the BUSY flag is still set */
 117                 if (!(StatusRegister & (1 << 7)))
 118                   return true;
 119         }
 120 }
 121
 122 /** Enables the physical TPI interface on the target and enables access to the internal NVM controller.
 123  *
 124  *  \return Boolean true if the TPI interface was enabled successfully, false otherwise
 125  */
 126 bool TINYNVM_EnableTPI(void)
 127 {
 128         /* Enable TPI programming mode with the attached target */
 129         XPROGTarget_EnableTargetTPI();
 130
 131         /* Lower direction change guard time to 0 USART bits */
 132         XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
 133         XPROGTarget_SendByte(0x07);
 134
 135         /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
 136         XPROGTarget_SendByte(TPI_CMD_SKEY);
 137         for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
 138           XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
 139
 140         /* Wait until the NVM bus becomes active */
 141         return TINYNVM_WaitWhileNVMBusBusy();
 142 }
 143
 144 /** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */
 145 void TINYNVM_DisableTPI(void)
 146 {
 147         TINYNVM_WaitWhileNVMBusBusy();
 148
 149         /* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
 150         XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_STATUS_REG);
 151         XPROGTarget_SendByte(0x00);
 152
 153         XPROGTarget_DisableTargetTPI();
 154 }
 155
 156 /** Reads memory from the target's memory spaces.
 157  *
 158  *  \param[in]  ReadAddress  Start address to read from within the target's address space
 159  *  \param[out] ReadBuffer   Buffer to store read data into
 160  *  \param[in]  ReadSize     Length of the data to read from the device
 161  *
 162  *  \return Boolean true if the command sequence complete successfully
 163  */
 164 bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
 165                         uint8_t* ReadBuffer,
 166                         uint16_t ReadSize)
 167 {
 168         /* Wait until the NVM controller is no longer busy */
 169         if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 170           return false;
 171
 172         /* Set the NVM control register to the NO OP command for memory reading */
 173         TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
 174         XPROGTarget_SendByte(TINY_NVM_CMD_NOOP);
 175
 176         /* Send the address of the location to read from */
 177         TINYNVM_SendPointerAddress(ReadAddress);
 178
 179         while (ReadSize-- && !(TimeoutExpired))
 180         {
 181                 /* Read the byte of data from the target */
 182                 XPROGTarget_SendByte(TPI_CMD_SLD | TPI_POINTER_INDIRECT_PI);
 183                 *(ReadBuffer++) = XPROGTarget_ReceiveByte();
 184         }
 185
 186         return (TimeoutExpired == false);
 187 }
 188
 189 /** Writes word addressed memory to the target's memory spaces.
 190  *
 191  *  \param[in] WriteAddress  Start address to write to within the target's address space
 192  *  \param[in] WriteBuffer   Buffer to source data from
 193  *  \param[in] WriteLength   Total number of bytes to write to the device (must be an integer multiple of 2)
 194  *
 195  *  \return Boolean true if the command sequence complete successfully
 196  */
 197 bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
 198                          uint8_t* WriteBuffer,
 199                          uint16_t WriteLength)
 200 {
 201         /* Wait until the NVM controller is no longer busy */
 202         if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 203           return false;
 204
 205         /* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */
 206         if (WriteLength & 0x01)
 207           WriteBuffer[WriteLength++] = 0xFF;
 208
 209         /* Set the NVM control register to the WORD WRITE command for memory writing */
 210         TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
 211         XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE);
 212
 213         /* Send the address of the location to write to */
 214         TINYNVM_SendPointerAddress(WriteAddress);
 215
 216         while (WriteLength)
 217         {
 218                 /* Wait until the NVM controller is no longer busy */
 219                 if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 220                   return false;
 221
 222                 /* Write the low byte of data to the target */
 223                 XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
 224                 XPROGTarget_SendByte(*(WriteBuffer++));
 225
 226                 /* Write the high byte of data to the target */
 227                 XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);
 228                 XPROGTarget_SendByte(*(WriteBuffer++));
 229
 230                 /* Need to decrement the write length twice, since we wrote a whole two-byte word */
 231                 WriteLength -= 2;
 232         }
 233
 234         return true;
 235 }
 236
 237 /** Erases the target's memory space.
 238  *
 239  *  \param[in] EraseCommand  NVM erase command to send to the device
 240  *  \param[in] Address       Address inside the memory space to erase
 241  *
 242  *  \return Boolean true if the command sequence complete successfully
 243  */
 244 bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
 245                          const uint16_t Address)
 246 {
 247         /* Wait until the NVM controller is no longer busy */
 248         if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 249           return false;
 250
 251         /* Set the NVM control register to the target memory erase command */
 252         TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
 253         XPROGTarget_SendByte(EraseCommand);
 254
 255         /* Write to a high byte location within the target address space to start the erase process */
 256         TINYNVM_SendPointerAddress(Address | 0x0001);
 257         XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);
 258         XPROGTarget_SendByte(0x00);
 259
 260         /* Wait until the NVM controller is no longer busy */
 261         if (!(TINYNVM_WaitWhileNVMControllerBusy()))
 262           return false;
 263
 264         return true;
 265 }
 266
 267 #endif
 268