projects / pub / USBasp.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Add LUFA DMBS extension modules, use DMBS in project makefiles.
[pub/USBasp.git] / Demos / Host / LowLevel / MassStorageHost / Lib / MassStoreCommands.c
1 /*
2 LUFA Library
3 Copyright (C) Dean Camera, 2016.
4
5 dean [at] fourwalledcubicle [dot] com
6 www.lufa-lib.org
7 */
8
9 /*
10 Copyright 2016 Dean Camera (dean [at] fourwalledcubicle [dot] com)
11
12 Permission to use, copy, modify, distribute, and sell this
13 software and its documentation for any purpose is hereby granted
14 without fee, provided that the above copyright notice appear in
15 all copies and that both that the copyright notice and this
16 permission notice and warranty disclaimer appear in supporting
17 documentation, and that the name of the author not be used in
18 advertising or publicity pertaining to distribution of the
19 software without specific, written prior permission.
20
21 The author disclaims all warranties with regard to this
22 software, including all implied warranties of merchantability
23 and fitness. In no event shall the author be liable for any
24 special, indirect or consequential damages or any damages
25 whatsoever resulting from loss of use, data or profits, whether
26 in an action of contract, negligence or other tortious action,
27 arising out of or in connection with the use or performance of
28 this software.
29 */
30
31 /** \file
32 *
33 * Mass Storage Device commands, to issue MSD commands to the device for
34 * reading device status, capacity, and other characteristics. This file
35 * also contains block read and write functions, so that device blocks
36 * can be read and written. In general, these functions would be chained
37 * to a FAT library to give file-level access to an attached device's contents.
38 *
39 * \note Many Mass Storage devices on the market are non-compliant to the
40 * specifications and thus can prove difficult to interface with. It
41 * may be necessary to retry the functions in the module several times
42 * after they have returned and error to successfully send the command
43 * to the device. Some devices may also need to have the stream function
44 * timeout period extended beyond 100ms (some badly designed devices exceeding
45 * 1.5 seconds occasionally) by defining USB_STREAM_TIMEOUT_MS to a
46 * larger value in the project makefile and passing it to the compiler
47 * via the -D switch.
48 */
49
50 #define INCLUDE_FROM_MASSSTORE_COMMANDS_C
51 #include "MassStoreCommands.h"
52
53 /** Current Tag value used in issued CBWs to the device. This is automatically incremented
54 * each time a command is sent, and is not externally accessible.
55 */
56 static uint32_t MassStore_Tag = 1;
57
58
59 /** Routine to send the current CBW to the device, and increment the Tag value as needed.
60 *
61 * \param[in] SCSICommandBlock Pointer to a SCSI command block structure to send to the attached device
62 * \param[in,out] BufferPtr Pointer to a buffer for the data to send or receive to/from the device, or NULL if no data
63 *
64 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
65 */
66 static uint8_t MassStore_SendCommand(MS_CommandBlockWrapper_t* const SCSICommandBlock,
67 void* BufferPtr)
68 {
69 uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
70
71 /* Wrap Tag value when invalid - MS class defines tag values of 0 and 0xFFFFFFFF to be invalid */
72 if (++MassStore_Tag == 0xFFFFFFFF)
73 MassStore_Tag = 1;
74
75 /* Each transmission should have a unique tag value, increment before use */
76 SCSICommandBlock->Tag = MassStore_Tag;
77
78 /* Select the OUT data pipe for CBW transmission */
79 Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
80 Pipe_Unfreeze();
81
82 /* Write the CBW command to the OUT pipe */
83 if ((ErrorCode = Pipe_Write_Stream_LE(SCSICommandBlock, sizeof(MS_CommandBlockWrapper_t), NULL)) !=
84 PIPE_RWSTREAM_NoError)
85 {
86 Pipe_Freeze();
87 return ErrorCode;
88 }
89
90 /* Send the data in the OUT pipe to the attached device */
91 Pipe_ClearOUT();
92
93 /* Wait until command has been sent */
94 Pipe_WaitUntilReady();
95
96 /* Freeze pipe after use */
97 Pipe_Freeze();
98
99 if (BufferPtr != NULL)
100 {
101 /* Transfer the requested data (if any) to or from the device */
102 ErrorCode = MassStore_SendReceiveData(SCSICommandBlock, (void*)BufferPtr);
103
104 /* Only fail completely if the transfer fails without a STALL, as a logical STALL can be recovered from */
105 if ((ErrorCode != PIPE_RWSTREAM_NoError) && (ErrorCode != PIPE_RWSTREAM_PipeStalled))
106 {
107 Pipe_Freeze();
108 return ErrorCode;
109 }
110 }
111
112 /* Retrieve the returned SCSI status from the device */
113 MS_CommandStatusWrapper_t SCSIStatusBlock;
114 return MassStore_GetReturnedStatus(&SCSIStatusBlock);
115 }
116
117 /** Waits until the attached device is ready to accept data following a CBW, checking
118 * to ensure that the device has not stalled the transaction.
119 *
120 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
121 */
122 static uint8_t MassStore_WaitForDataReceived(void)
123 {
124 uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;
125 uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
126
127 /* Select the IN data pipe for data reception */
128 Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
129 Pipe_Unfreeze();
130
131 /* Wait until data received in the IN pipe */
132 while (!(Pipe_IsINReceived()))
133 {
134 uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
135
136 /* Check to see if a new frame has been issued (1ms elapsed) */
137 if (CurrentFrameNumber != PreviousFrameNumber)
138 {
139 /* Save the new frame number and decrement the timeout period */
140 PreviousFrameNumber = CurrentFrameNumber;
141 TimeoutMSRem--;
142
143 /* Check to see if the timeout period for the command has elapsed */
144 if (!(TimeoutMSRem))
145 return PIPE_RWSTREAM_Timeout;
146 }
147
148 Pipe_Freeze();
149 Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
150 Pipe_Unfreeze();
151
152 /* Check if pipe stalled (command failed by device) */
153 if (Pipe_IsStalled())
154 {
155 /* Clear the stall condition on the OUT pipe */
156 USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
157
158 return PIPE_RWSTREAM_PipeStalled;
159 }
160
161 Pipe_Freeze();
162 Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
163 Pipe_Unfreeze();
164
165 /* Check if pipe stalled (command failed by device) */
166 if (Pipe_IsStalled())
167 {
168 /* Clear the stall condition on the IN pipe */
169 USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
170
171 return PIPE_RWSTREAM_PipeStalled;
172 }
173
174 /* Check to see if the device was disconnected, if so exit function */
175 if (USB_HostState == HOST_STATE_Unattached)
176 return PIPE_RWSTREAM_DeviceDisconnected;
177 };
178
179 Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
180 Pipe_Freeze();
181
182 Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
183 Pipe_Freeze();
184
185 return PIPE_RWSTREAM_NoError;
186 }
187
188 /** Sends or receives the transaction's data stage to or from the attached device, reading or
189 * writing to the nominated buffer.
190 *
191 * \param[in] SCSICommandBlock Pointer to a SCSI command block structure being sent to the attached device
192 * \param[in,out] BufferPtr Pointer to the data buffer to read from or write to
193 *
194 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
195 */
196 static uint8_t MassStore_SendReceiveData(MS_CommandBlockWrapper_t* const SCSICommandBlock,
197 void* BufferPtr)
198 {
199 uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
200 uint16_t BytesRem = SCSICommandBlock->DataTransferLength;
201
202 /* Check the direction of the SCSI command data stage */
203 if (SCSICommandBlock->Flags & MS_COMMAND_DIR_DATA_IN)
204 {
205 /* Wait until the device has replied with some data */
206 if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
207 return ErrorCode;
208
209 /* Select the IN data pipe for data reception */
210 Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
211 Pipe_Unfreeze();
212
213 /* Read in the block data from the pipe */
214 if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError)
215 return ErrorCode;
216
217 /* Acknowledge the packet */
218 Pipe_ClearIN();
219 }
220 else
221 {
222 /* Select the OUT data pipe for data transmission */
223 Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
224 Pipe_Unfreeze();
225
226 /* Write the block data to the pipe */
227 if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError)
228 return ErrorCode;
229
230 /* Acknowledge the packet */
231 Pipe_ClearOUT();
232
233 while (!(Pipe_IsOUTReady()))
234 {
235 if (USB_HostState == HOST_STATE_Unattached)
236 return PIPE_RWSTREAM_DeviceDisconnected;
237 }
238 }
239
240 /* Freeze used pipe after use */
241 Pipe_Freeze();
242
243 return PIPE_RWSTREAM_NoError;
244 }
245
246 /** Routine to receive the current CSW from the device.
247 *
248 * \param[out] SCSICommandStatus Pointer to a destination where the returned status data should be stored
249 *
250 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
251 */
252 static uint8_t MassStore_GetReturnedStatus(MS_CommandStatusWrapper_t* const SCSICommandStatus)
253 {
254 uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
255
256 /* If an error in the command occurred, abort */
257 if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
258 return ErrorCode;
259
260 /* Select the IN data pipe for data reception */
261 Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
262 Pipe_Unfreeze();
263
264 /* Load in the CSW from the attached device */
265 if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t), NULL)) !=
266 PIPE_RWSTREAM_NoError)
267 {
268 return ErrorCode;
269 }
270
271 /* Clear the data ready for next reception */
272 Pipe_ClearIN();
273
274 /* Freeze the IN pipe after use */
275 Pipe_Freeze();
276
277 /* Check to see if command failed */
278 if (SCSICommandStatus->Status != MS_SCSI_COMMAND_Pass)
279 ErrorCode = MASS_STORE_SCSI_COMMAND_FAILED;
280
281 return ErrorCode;
282 }
283
284 /** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
285 * readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this
286 * command completes successfully.
287 *
288 * \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
289 */
290 uint8_t MassStore_MassStorageReset(void)
291 {
292 uint8_t ErrorCode;
293
294 USB_ControlRequest = (USB_Request_Header_t)
295 {
296 .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
297 .bRequest = MS_REQ_MassStorageReset,
298 .wValue = 0,
299 .wIndex = 0,
300 .wLength = 0,
301 };
302
303 /* Select the control pipe for the request transfer */
304 Pipe_SelectPipe(PIPE_CONTROLPIPE);
305
306 if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
307 return ErrorCode;
308
309 /* Select first data pipe to clear STALL condition if one exists */
310 Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
311
312 if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful)
313 return ErrorCode;
314
315 /* Select second data pipe to clear STALL condition if one exists */
316 Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
317
318 if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful)
319 return ErrorCode;
320
321 return HOST_SENDCONTROL_Successful;
322 }
323
324 /** Issues a Mass Storage class specific request to determine the index of the highest numbered Logical
325 * Unit in the attached device.
326 *
327 * \note Some devices do not support this request, and will STALL it when issued. To get around this,
328 * on unsupported devices the max LUN index will be reported as zero and no error will be returned
329 * if the device STALLs the request.
330 *
331 * \param[out] MaxLUNIndex Pointer to the location that the maximum LUN index value should be stored
332 *
333 * \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
334 */
335 uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)
336 {
337 uint8_t ErrorCode;
338
339 USB_ControlRequest = (USB_Request_Header_t)
340 {
341 .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
342 .bRequest = MS_REQ_GetMaxLUN,
343 .wValue = 0,
344 .wIndex = 0,
345 .wLength = 1,
346 };
347
348 /* Select the control pipe for the request transfer */
349 Pipe_SelectPipe(PIPE_CONTROLPIPE);
350
351 if ((ErrorCode = USB_Host_SendControlRequest(MaxLUNIndex)) == HOST_SENDCONTROL_SetupStalled)
352 {
353 /* Clear the pipe stall */
354 Pipe_ClearStall();
355
356 /* Some faulty Mass Storage devices don't implement the GET_MAX_LUN request, so assume a single LUN */
357 *MaxLUNIndex = 0;
358
359 /* Clear the error, and pretend the request executed correctly if the device STALLed it */
360 ErrorCode = HOST_SENDCONTROL_Successful;
361 }
362
363 return ErrorCode;
364 }
365
366 /** Issues a SCSI Inquiry command to the attached device, to determine the device's information. This
367 * gives information on the device's capabilities.
368 *
369 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
370 * \param[out] InquiryPtr Pointer to the inquiry data structure where the inquiry data from the device is to be stored
371 *
372 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
373 */
374 uint8_t MassStore_Inquiry(const uint8_t LUNIndex,
375 SCSI_Inquiry_Response_t* const InquiryPtr)
376 {
377 /* Create a CBW with a SCSI command to issue INQUIRY command */
378 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
379 {
380 .Signature = MS_CBW_SIGNATURE,
381 .DataTransferLength = sizeof(SCSI_Inquiry_Response_t),
382 .Flags = MS_COMMAND_DIR_DATA_IN,
383 .LUN = LUNIndex,
384 .SCSICommandLength = 6,
385 .SCSICommandData =
386 {
387 SCSI_CMD_INQUIRY,
388 0x00, // Reserved
389 0x00, // Reserved
390 0x00, // Reserved
391 sizeof(SCSI_Inquiry_Response_t), // Allocation Length
392 0x00 // Unused (control)
393 }
394 };
395
396 /* Send the command and any data to the attached device */
397 return MassStore_SendCommand(&SCSICommandBlock, InquiryPtr);
398 }
399
400 /** Issues a SCSI Request Sense command to the attached device, to determine the current SCSI sense information. This
401 * gives error codes for the last issued SCSI command to the device.
402 *
403 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
404 * \param[out] SensePtr Pointer to the sense data structure where the sense data from the device is to be stored
405 *
406 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
407 */
408 uint8_t MassStore_RequestSense(const uint8_t LUNIndex,
409 SCSI_Request_Sense_Response_t* const SensePtr)
410 {
411 /* Create a CBW with a SCSI command to issue REQUEST SENSE command */
412 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
413 {
414 .Signature = MS_CBW_SIGNATURE,
415 .DataTransferLength = sizeof(SCSI_Request_Sense_Response_t),
416 .Flags = MS_COMMAND_DIR_DATA_IN,
417 .LUN = LUNIndex,
418 .SCSICommandLength = 6,
419 .SCSICommandData =
420 {
421 SCSI_CMD_REQUEST_SENSE,
422 0x00, // Reserved
423 0x00, // Reserved
424 0x00, // Reserved
425 sizeof(SCSI_Request_Sense_Response_t), // Allocation Length
426 0x00 // Unused (control)
427 }
428 };
429
430 /* Send the command and any data to the attached device */
431 return MassStore_SendCommand(&SCSICommandBlock, SensePtr);
432 }
433
434 /** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the
435 * storage medium into a buffer.
436 *
437 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
438 * \param[in] BlockAddress Start block address to read from
439 * \param[in] Blocks Number of blocks to read from the device
440 * \param[in] BlockSize Size in bytes of each block to read
441 * \param[out] BufferPtr Pointer to the buffer where the read data is to be written to
442 *
443 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
444 */
445 uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex,
446 const uint32_t BlockAddress,
447 const uint8_t Blocks,
448 const uint16_t BlockSize,
449 void* BufferPtr)
450 {
451 /* Create a CBW with a SCSI command to read in the given blocks from the device */
452 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
453 {
454 .Signature = MS_CBW_SIGNATURE,
455 .DataTransferLength = ((uint32_t)Blocks * BlockSize),
456 .Flags = MS_COMMAND_DIR_DATA_IN,
457 .LUN = LUNIndex,
458 .SCSICommandLength = 10,
459 .SCSICommandData =
460 {
461 SCSI_CMD_READ_10,
462 0x00, // Unused (control bits, all off)
463 (BlockAddress >> 24), // MSB of Block Address
464 (BlockAddress >> 16),
465 (BlockAddress >> 8),
466 (BlockAddress & 0xFF), // LSB of Block Address
467 0x00, // Reserved
468 0x00, // MSB of Total Blocks to Read
469 Blocks, // LSB of Total Blocks to Read
470 0x00 // Unused (control)
471 }
472 };
473
474 /* Send the command and any data to the attached device */
475 return MassStore_SendCommand(&SCSICommandBlock, BufferPtr);
476 }
477
478 /** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the
479 * storage medium from a buffer.
480 *
481 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
482 * \param[in] BlockAddress Start block address to write to
483 * \param[in] Blocks Number of blocks to write to in the device
484 * \param[in] BlockSize Size in bytes of each block to write
485 * \param[in] BufferPtr Pointer to the buffer where the write data is to be sourced from
486 *
487 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
488 */
489 uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex,
490 const uint32_t BlockAddress,
491 const uint8_t Blocks,
492 const uint16_t BlockSize,
493 void* BufferPtr)
494 {
495 /* Create a CBW with a SCSI command to write the given blocks to the device */
496 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
497 {
498 .Signature = MS_CBW_SIGNATURE,
499 .DataTransferLength = ((uint32_t)Blocks * BlockSize),
500 .Flags = MS_COMMAND_DIR_DATA_OUT,
501 .LUN = LUNIndex,
502 .SCSICommandLength = 10,
503 .SCSICommandData =
504 {
505 SCSI_CMD_WRITE_10,
506 0x00, // Unused (control bits, all off)
507 (BlockAddress >> 24), // MSB of Block Address
508 (BlockAddress >> 16),
509 (BlockAddress >> 8),
510 (BlockAddress & 0xFF), // LSB of Block Address
511 0x00, // Unused (reserved)
512 0x00, // MSB of Total Blocks to Write
513 Blocks, // LSB of Total Blocks to Write
514 0x00 // Unused (control)
515 }
516 };
517
518 /* Send the command and any data to the attached device */
519 return MassStore_SendCommand(&SCSICommandBlock, BufferPtr);
520 }
521
522 /** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept
523 * other commands.
524 *
525 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
526 *
527 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
528 */
529 uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
530 {
531 /* Create a CBW with a SCSI command to issue TEST UNIT READY command */
532 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
533 {
534 .Signature = MS_CBW_SIGNATURE,
535 .DataTransferLength = 0,
536 .Flags = MS_COMMAND_DIR_DATA_IN,
537 .LUN = LUNIndex,
538 .SCSICommandLength = 6,
539 .SCSICommandData =
540 {
541 SCSI_CMD_TEST_UNIT_READY,
542 0x00, // Reserved
543 0x00, // Reserved
544 0x00, // Reserved
545 0x00, // Reserved
546 0x00 // Unused (control)
547 }
548 };
549
550 /* Send the command and any data to the attached device */
551 return MassStore_SendCommand(&SCSICommandBlock, NULL);
552 }
553
554 /** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the
555 * given Logical Unit within the device.
556 *
557 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
558 * \param[out] CapacityPtr Device capacity structure where the capacity data is to be stored
559 *
560 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
561 */
562 uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex,
563 SCSI_Capacity_t* const CapacityPtr)
564 {
565 uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
566
567 /* Create a CBW with a SCSI command to issue READ CAPACITY command */
568 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
569 {
570 .Signature = MS_CBW_SIGNATURE,
571 .DataTransferLength = sizeof(SCSI_Capacity_t),
572 .Flags = MS_COMMAND_DIR_DATA_IN,
573 .LUN = LUNIndex,
574 .SCSICommandLength = 10,
575 .SCSICommandData =
576 {
577 SCSI_CMD_READ_CAPACITY_10,
578 0x00, // Reserved
579 0x00, // MSB of Logical block address
580 0x00,
581 0x00,
582 0x00, // LSB of Logical block address
583 0x00, // Reserved
584 0x00, // Reserved
585 0x00, // Partial Medium Indicator
586 0x00 // Unused (control)
587 }
588 };
589
590 /* Send the command and any data to the attached device */
591 if ((ErrorCode = MassStore_SendCommand(&SCSICommandBlock, CapacityPtr)) != PIPE_RWSTREAM_NoError)
592 return ErrorCode;
593
594 /* Endian-correct the read data */
595 CapacityPtr->Blocks = SwapEndian_32(CapacityPtr->Blocks);
596 CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize);
597
598 return ErrorCode;
599 }
600
601 /** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from
602 * being removed. This is a legacy command for SCSI disks with removable storage (such as ZIP disks), but should still
603 * be issued before the first read or write command is sent.
604 *
605 * \param[in] LUNIndex Index of the LUN inside the device the command is being addressed to
606 * \param[in] PreventRemoval Whether or not the LUN media should be locked to prevent removal or not
607 *
608 * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
609 */
610 uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex,
611 const bool PreventRemoval)
612 {
613 /* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */
614 MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
615 {
616 .Signature = MS_CBW_SIGNATURE,
617 .DataTransferLength = 0,
618 .Flags = MS_COMMAND_DIR_DATA_OUT,
619 .LUN = LUNIndex,
620 .SCSICommandLength = 6,
621 .SCSICommandData =
622 {
623 SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL,
624 0x00, // Reserved
625 0x00, // Reserved
626 PreventRemoval, // Prevent flag
627 0x00, // Reserved
628 0x00 // Unused (control)
629 }
630 };
631
632 /* Send the command and any data to the attached device */
633 return MassStore_SendCommand(&SCSICommandBlock, NULL);
634 }
635
USB isp AVR programmer