X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/f896c00c48f04fb9273555ab8d9b1af99f865d25..c830fcb0e1d42c1300ebe78a8b33924054b63a87:/Demos/Host/ClassDriver/CDCHost/CDCHost.c

diff --git a/Demos/Host/ClassDriver/CDCHost/CDCHost.c b/Demos/Host/ClassDriver/CDCHost/CDCHost.c
index 941cf7cc4..cf0a9f3ae 100644
--- a/Demos/Host/ClassDriver/CDCHost/CDCHost.c
+++ b/Demos/Host/ClassDriver/CDCHost/CDCHost.c
@@ -42,10 +42,14 @@
  */
 USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface =
 	{
-		.DataINPipeNumber       = 1,
-		.DataOUTPipeNumber      = 2,
-		.NotificationPipeNumber = 3,
+		.Config =
+			{
+				.DataINPipeNumber       = 1,
+				.DataOUTPipeNumber      = 2,
+				.NotificationPipeNumber = 3,
+			},
 	};
+
 	
 /** Main program entry point. This routine configures the hardware required by the application, then
  *  starts the scheduler to run the application tasks.
@@ -54,13 +58,54 @@ int main(void)
 {
 	SetupHardware();
 
-	puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
-	       "CDC Host Demo running.\r\n" ESC_INVERSE_OFF));
+	puts_P(PSTR(ESC_FG_CYAN "CDC Host Demo running.\r\n" ESC_FG_WHITE));
 
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 
 	for (;;)
 	{
+		switch (USB_HostState)
+		{
+			case HOST_STATE_Addressed:
+				LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+			
+				uint16_t ConfigDescriptorSize;
+				uint8_t  ConfigDescriptorData[512];
+
+				if ((USB_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful) ||
+				    (ConfigDescriptorSize > sizeof(ConfigDescriptorData)) ||
+					(USB_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData)))
+				{
+					printf("Error Retrieving Configuration Descriptor.\r\n");
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+
+				if (CDC_Host_ConfigurePipes(&VirtualSerial_CDC_Interface,
+				                            ConfigDescriptorSize, ConfigDescriptorData) != CDC_ENUMERROR_NoError)
+				{
+					printf("Attached Device Not a Valid CDC Class Device.\r\n");
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+				
+				if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+				{
+					printf("Error Setting Device Configuration.\r\n");
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;
+				}
+				
+				printf("CDC Device Enumerated.\r\n");
+				USB_HostState = HOST_STATE_Configured;
+				break;
+			case HOST_STATE_Configured:
+				break;
+		}
+	
 		CDC_Host_USBTask(&VirtualSerial_CDC_Interface);
 		USB_USBTask();
 	}
@@ -85,7 +130,7 @@ void SetupHardware(void)
 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
  *  starts the library USB task to begin the enumeration and USB management process.
  */
-void EVENT_USB_DeviceAttached(void)
+void EVENT_USB_Host_DeviceAttached(void)
 {
 	puts_P(PSTR("Device Attached.\r\n"));
 	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
@@ -94,7 +139,7 @@ void EVENT_USB_DeviceAttached(void)
 /** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
  *  stops the library USB task management process.
  */
-void EVENT_USB_DeviceUnattached(void)
+void EVENT_USB_Host_DeviceUnattached(void)
 {
 	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
@@ -103,18 +148,18 @@ void EVENT_USB_DeviceUnattached(void)
 /** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
  *  enumerated by the host and is now ready to be used by the application.
  */
-void EVENT_USB_DeviceEnumerationComplete(void)
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
 {
 	LEDs_SetAllLEDs(LEDMASK_USB_READY);
 }
 
 /** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_HostError(const uint8_t ErrorCode)
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
 {
 	USB_ShutDown();
 
-	puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
-	printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
 
 	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 	for(;;);
@@ -123,12 +168,12 @@ void EVENT_USB_HostError(const uint8_t ErrorCode)
 /** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
  *  enumerating an attached USB device.
  */
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
 {
-	puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
-	printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
-	printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
-	printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
 	
 	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 }