X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/f7b9ebea02cf2a48fd4b287f6a445090ea433d52..be2df78637004801ea05902afe2b0e55da43ff47:/LUFA/DoxygenPages/ChangeLog.txt diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt index e218fe3a3..3b28fe57f 100644 --- a/LUFA/DoxygenPages/ChangeLog.txt +++ b/LUFA/DoxygenPages/ChangeLog.txt @@ -8,15 +8,90 @@ * * \section Sec_ChangeLogXXXXXX Version XXXXXX * New: + * - Added support for the Atmel Xplained-MINI series of development kits. + * + * Changed: + * - Library Applications: + * - The CDC, DFU, Mass Storage and Printer class bootloaders will no longer run the user application if the application reset + * vector is blank (thanks to Alex Kazik) + * - The CDC, DFU and Printer class bootloaders are now compatible with the original Atmel XPLAIN and Arduino Leonardo boards. + * - The CDC, DFU, Mass Storage and Printer class bootloaders are not compatible with devices with the BOOTRST fuse set and will + * exit automatically unless an external reset was the last reset cause (thanks to Alex Kazik) + * + * Fixed: + * - None. + * + * \section Sec_ChangeLog140928 Version 140928 + * New: + * - Core: + * - Updated the BUILD build system module to add a new COMPILER_PATH optional variable + * - Added Serial_IsSendReady() and Serial_IsSendComplete() functions to the Serial hardware peripheral driver + * - Added support for the Arduino Yun board (ATMEGA32U4 co-processor) + * - Added support for the Arduino Micro board (thanks to Zoltán Szőke) + * - Library Applications: + * - Added new Dual MIDI class driver device demo + * + * Changed: + * - Core: + * - The RNDIS device class driver now takes a user-supplied buffer and buffer length for the internal RNDIS + * message management (thanks to Peter Mc Shane) + * + * Fixed: + * - Core: + * - Fixed device class driver pipe configuration routines returning success with a partially constructed instance + * when a pipe configuration failed (thanks to Helge Suess) + * - Fixed incorrect XMEGA DFLL reference frequency (thanks to Martin Aakerberg) + * - Fixed possible infinite loop in the control endpoint stream write function (thanks to Clayton Knight) + * - Fixed missing HID report ID prefix on HID class driver GetReport request responses (thanks to Bert van Hall) + * - Fixed incorrect XMEGA USB controller clock division factory for non-Full Speed operation (thanks to Bert van Hall) + * - Fixed the LUFA build system to prevent incorrect code from being generated in newer toolchains when building for larger + * FLASH memory devices (thanks to demultiplexer) + * - Fixed missing parenthesis in the MIDI_EVENT() macro which could cause incorrect results (thanks to hexwab) + * - Fixed mixed capitalization of TWI in the XMEGA TWI driver causing compilation failures (thanks to Jacob Schloss) + * - Fixed broken AVR8 USART-SPI peripheral driver (thanks to Phil Zakielarz) + * - Library Applications: + * - Fixed spurious 0xFE USART byte sent in the USBtoSerial project when the baud rate is changed (thanks to Carl Kjeldsen) + * - Fixed blocking USART reads causing low throughput on slow baud rates in the USBtoSerial project (thanks to Nevada Smith) + * - Fixed USART reception overrun corrupting the internal buffers in the USBtoSerial project (thanks to Nevada Smith) + * - Fixed broken LowLevel Audio Out demo sampling frequency configuration (thanks to Torsten Duwe) + * + * \section Sec_ChangeLog140302 Version 140302 + * New: + * - Library Applications: + * - Added new Bulk Vendor low level device demo + * - Added new libUSB host Python and NodeJS application examples for the Class driver GenericHID demo (thanks to Laszlo Monda) + * - Added new AVR8 USB option to keep 3.3V regulator enabled (thanks to Michael Hanselmann) + * - Added new USB_STRING_DESCRIPTOR() and USB_STRING_DESCRIPTOR_ARRAY() convenience macros (thanks to Laszlo Monda) + * + * Changed: + * - Library Applications: + * - Refactored out USB interface IDs in the demo applications into enums (thanks to Laszlo Monda) + * - AVRISP-MKII Clone Project PDI/TPI frequency increased from 250KHz to 2MHz as it is now stable + * - Increased TPI/PDI handshake delay to 100us from 1us to support targets with high amounts of capacitance on their + * /RESET lines (thanks to Paul Duke) + * - Changed the VERSION_BCD() macro to accept the major/minor/revision values as separate parameters + * + * Fixed: + * - Core: + * - Fixed MIDI device class driver MIDI_Device_ReceiveEventPacket() for the XMEGA architecture + * - Library Applications: + * - Fixed incorrect signature bytes returned in the DFU bootloader + * + * \section Sec_ChangeLog130901 Version 130901 + * New: * - Core: * - Added additional MIDI command definitions to the MIDI class driver (thanks to Daniel Dreibrodt) * - Added new CONCAT() and CONCAT_EXPANDED() convenience macros * - Added new Printer Device Class driver * - Added support for the XMEGA C3 Xplained board + * - Added support for the U2S board (thanks to megal0maniac) + * - Added TWI Master driver for the XMEGA architecture (thanks to Michael Janssen) * - Library Applications: * - Added new Printer class bootloader * - Added new Mass Storage class bootloader * - Added XMEGA support for class driver device demos (where applicable) + * - Added Python host application example for the Generic HID class driver device demo + * - Added Python alternative host application for the HID class bootloader * * Changed: * - Core: @@ -25,6 +100,10 @@ * - All board drivers now implement dummy functions and constants when BOARD is set to NONE * - Added missing LEDs to the XMEGA A3BU Xplained board LED driver (thanks to Michael Janssen) * - Changed board Dataflash drivers to automatically configure the appropriate SPI interface for the selected board + * - Library Applications: + * - Re-added Set Control Line State request handling to the CDC class bootloader to prevent issues with the .NET serial + * class (thanks to Erik Lins) + * - TemperatureDataLogger project dummy RTC mode now tracks real time (thanks to David Lazarus) * * Fixed: * - Core: @@ -32,6 +111,10 @@ * - Fixed possible register corruption in USB Host mode on AVR8 devices when ORDERED_EP_CONFIG is used (thanks to Martin Aakerberg) * - Fixed Pipe_GetBoundEndpointAddress() returning invalid endpoint directions on AVR8 architecture devices (thanks to decerri) * under some circumstances + * - Fixed incorrect USB device state set when a suspended LUFA device is woken while addressed but not configured (thanks to Balaji Krishnan) + * - Fixed broken USART SPI driver for the AVR8 architecture due to incorrect initialization + * - Fixed re-enumeration issue of XMEGA architecture targets (thanks to Jaroslav Jedlinsky) + * - Fixed error receiving PIMA events via the Still Image Host class driver * - Library Applications: * - Added handler for SCSI_CMD_START_STOP_UNIT in demos using the Mass Storage class, to prevent ejection errors on *nix systems due to an * unknown SCSI command @@ -40,6 +123,7 @@ * - Fixed incorrect HID report descriptor generated for button multiples of 8 by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK() * macros * - Fixed race condition in the DFU class bootloader causing failed device reprogramming in some circumstances (thanks to Luis Mendes) + * - Fixed incorrect time/date configuration data order in the TempDataLogger host application (thanks to David Lazarus) * * \section Sec_ChangeLog130303 Version 130303 * New: @@ -146,7 +230,7 @@ * - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid) * - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin) * - Fixed inverted LED logic in the OLIMEX162 board LED driver - * - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) + * - Fixed incorrect response to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) * - Fixed inverted LED logic in the USB2AX board LED driver * - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by * the stack (thanks to Jonathan Hudgins) @@ -198,7 +282,7 @@ * - Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without * having to reset the Mass Storage interface * - USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors) - * - Reordered board name definition indexes so that a mispelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY + * - Reordered board name definition indexes so that a misspelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY * - Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage * - All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance * - Library Applications: @@ -745,7 +829,7 @@ * - Added new RNDIS Ethernet Host ClassDriver demo * - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device * - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair) - * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used + * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different Dataflash used * on the first revision boards compared to the one mounted on later revisions * - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype * - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values @@ -1063,7 +1147,7 @@ * Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe * bank management API * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG) - * - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity + * - Updated library Doxygen documentation, added groups, changed documentation macro functions to real functions for clarity * - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity * - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway * - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream @@ -1279,7 +1363,7 @@ * - All HID demos now pass the USB.org automated HID compliance tests * - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems * - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks - * - Mass Storage demo dataflash management routines changed to use the endpoint stream functions + * - Mass Storage demo Dataflash management routines changed to use the endpoint stream functions * - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file * - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes * are reflected in the hardware (change was previously lost) @@ -1335,7 +1419,7 @@ * size bits not required for the routines (improves compatibility with devices) * - Fixed AudioInput demo - now correctly sends sampled audio to the host PC * - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes - * - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes + * - Shrunk round-robin scheduler code slightly via the use of struct pointers rather than array indexes * - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser * - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder * - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler @@ -1477,7 +1561,7 @@ * - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and * placing board drivers in {Application Directory}/Board/ * - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power - * - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY + * - Joystick defines are now in sync with the schematics - orientation will be rotated for the USBKEY * - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register * - Fixed data transfers to devices when in host mode * - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to @@ -1512,7 +1596,7 @@ * - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer * pointer is passed * - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables - * dependant on size of memory parameters passed in via the user project's makefile + * dependent on size of memory parameters passed in via the user project's makefile * - Fixed incorrect device reset routine being called in USBTask * - Devices which do not connect within the standard 300mS are now supported * - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being