X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/f11826fc477426bfaecdeff03041c320e96ee9fc..c93259fbdbfec154b37fd4c3a4e1b43f5b7265e5:/LUFA/DoxygenPages/ChangeLog.txt

diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt
index d5ecd845f..dfc6af612 100644
--- a/LUFA/DoxygenPages/ChangeLog.txt
+++ b/LUFA/DoxygenPages/ChangeLog.txt
@@ -9,20 +9,78 @@
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
   *  <b>New:</b>
   *  - Core:
+  *   - Added support for the Arduino Leonardo board
+  *   - Added support for the Atmel UC3-A3 Xplained board
+  *   - Added new doxygen_upgrade and doxygen_create targets to the DOXYGEN build system module
+  *  - Library Applications:
+  *   - Added a different device serial number when the AVRISP-MKII Clone project is in libUSB compatibility mode, so that
+  *     both the libUSB and Jungo drivers can be installed at the same time
+  *
+  *  <b>Changed:</b>
+  *  - Core:
+  *   - Added workaround for broken VBUS detection on AVR8 devices when a bootloader starts the application
+  *     via a software jump without first turning off the OTG pad (thanks to Simon Inns)
+  *  - Library Applications:
+  *   - <i>None</i>
+  *
+  *  <b>Fixed:</b>
+  *  - Core:
+  *   - Fixed inverted LEDs_GetLEDs() function implementation for the Benito, Minimus and Arduino UNO boards
+  *   - Fixed missing Win-32bit compatibility sections in the LUFA INF driver files (thanks to Christan Beharrell)
+  *   - Fixed logic hole breaking USB operations on a USB controller with only one supported USB mode and no USB_DEVICE_ONLY or USB_HOST_ONLY
+  *     configuration token set
+  *   - Fixed possible rounding in the VERSION_BCD() macros for some 0.01 step increments (thanks to Oliver Zander)
+  *  - Library Applications:
+  *   - Fixed broken RESET_TOGGLES_LIBUSB_COMPAT compile time option in the AVRISP-MKII project
+  *   - Fixed incompatibility in the CDC class bootloader on some systems (thanks to Sylvain Munaut)
+  *
+  *  \section Sec_ChangeLog120730 Version 120730
+  *  <b>New:</b>
+  *  - Core:
+  *   - Added new, revamped modular build system with new makefile templates
   *   - Added support for the BitWizard Multio and Big-Multio boards
+  *   - Added support for the DorkbotPDX Duce board
+  *   - Added support for the Olimex AVR-USB-32U4 board
+  *   - Added support for the Olimex AVR-USB-T32U4 board
+  *   - Added support for the Olimex AVR-ISP-MK2 board
+  *   - Added new Endpoint_ConfigureEndpointTable() function
+  *   - Added new Pipe_ConfigurePipeTable() function
+  *   - Added build test to verify correct compilation of all board drivers using all driver APIs
+  *   - Added build test to verify correct compilation of all bootloaders using all supported devices  
+  *   - Added build test to verify that there are no detectable errors in the codebase via static analysis
+  *   - Added new JTAG_ENABLE() macro for the AVR8 architecture
   *  - Library Applications:
   *   - Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices
   *   - Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use
+  *   - Added new SerialToLCD user project contributed by Simon Foster
+  *   - Added new RESET_TOGGLES_LIBUSB_COMPAT compile time option to the AVRISP-MKII clone programmer project (thanks to Robert Spitzenpfeil)
   *
   *  <b>Changed:</b>
   *  - Core:
   *   - Android Accessory Host property strings changed from a struct of pointer to an array to prevent unaligned access on greater than 8-bit architectures
   *   - Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments
   *   - Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure
+  *   - Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release
+  *   - Endpoint indexes are now specified as full endpoint addresses within the device in device mode, rather than a logical index
+  *   - The Endpoint_ConfigureEndpoint() function no longer takes an endpoint direction as a parameter, as this is now deduced from the specified full endpoint
+  *     address and type
+  *   - The Endpoint_ConfigureEndpoint() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter
+  *   - Endpoints are now configured via instances of a new struct USB_Endpoint_Table_t in all device mode class drivers, rather than a list of endpoint parameters
+  *   - Pipe indexes are now specified as full pipe addresses within the host in host mode, rather than a logical index
+  *   - The Pipe_ConfigurePipe() function no longer takes an pipe token as a parameter, as this is now deduced from the specified full pipe address and type
+  *   - The Pipe_ConfigurePipe() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter
+  *   - Pipes are now configured via instances of a new struct USB_Pipe_Table_t in all host mode class drivers, rather than a list of pipe parameters
+  *   - Added support for various assert and debugging macros for the UC3 devices
+  *   - Changed MIDI event structure MIDI_EventPacket_t to use a single field for the combined virtual cable index and command ID, to prevent bitfield packing issues
+  *     on some architectures (thanks to Darren Gibbs)
+  *   - Changed board LED driver implementations of LEDs_ToggleLEDs() for the AVR8 architecture to use the fast PIN register toggle alternative function for speed
   *  - Library Applications:
   *   - Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target
   *   - Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders
   *   - Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed
+  *   - The library bootloaders will now correctly start the user application after a watchdog-based application start, even if the /HWB line is held low externally
+  *     during the reset phase
+  *   - Increased endpoint polling interval for all demos and projects to 5ms, as 1ms was causing some enumeration issues on some machines (thanks to Riku Salminen)
   *
   *  <b>Fixed:</b>
   *  - Core:
@@ -32,10 +90,26 @@
   *   - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid)
   *   - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin)
   *   - Fixed inverted LED logic in the OLIMEX162 board LED driver
+  *   - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock)
+  *   - Fixed inverted LED logic in the USB2AX board LED driver
+  *   - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by
+  *     the stack (thanks to Jonathan Hudgins)
+  *   - Fixed broken MIDI host driver MIDI_Host_ReceiveEventPacket() function due to not unfreezing the MIDI data IN pipe before use (thanks to Michael Brown)
+  *   - Fixed swapped Little Endian/Big Endian endpoint and pipe write code for the UC3 devices (thanks to Andrew Chu)
+  *   - Fixed the JTAG_DISABLE() macro clearing all other bits in MCUSR when called
+  *   - Fixed incorrect Micropendous board LED driver LEDs_SetAllLEDs() and LEDs_ChangeLEDs() function implementations (thanks to MitchJS)
+  *   - Fixed endianess issues in the RNDIS host class driver for UC3 devices (thanks to Andrew Chu)  
   *  - Library Applications:
   *   - Fixed error in the AVRISP-MKII programmer when ISP mode is used at 64KHz (thanks to Ben R. Porter)
   *   - Fixed AVRISP-MKII programmer project failing to compile for the U4 chips when VTARGET_ADC_CHANNEL is defined to an invalid channel and NO_VTARGET_DETECT is
   *     defined (thanks to Steven Morehouse)
+  *   - Fixed AVRISP-MKII programmer project reset line polarity inverted when the generated EEP file is loaded into the USB AVR's EEPROM and avr-dude is used
+  *   - Fixed CDC and DFU bootloaders failing to compile when the bootloader section size is 8KB or more (thanks to Georg Glock)
+  *   - Fixed CDC and DFU bootloaders API function offsets incorrect on some devices (thanks to Rod DeMay)
+  *   - Fixed incorrect DFU version number reported to the host in the  DFU bootloader descriptors (thanks to Georg Glock)
+  *   - Fixed incorrect version hundredths value encoding in VERSION_BCD() macro (thanks to Georg Glock)
+  *   - Fixed invalid configuration descriptor in the low level KeyboardMouse device demo (thanks to Jun Wako)
+  *   - Fixed CDC and DFU bootloaders API page erase and write function failures (thanks to Martin Lambert)
   *
   *  \section Sec_ChangeLog120219 Version 120219
   *  <b>New:</b>