X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/efb6c357784af2293a50b3fca9503c3a4c13a9e1..2a072db7030fa33be1e8dcf82ebf0b45cb4d77c1:/LUFA/ManPages/ChangeLog.txt

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 79fa8242b..724ef1ec4 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -9,7 +9,41 @@
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
   *
   *  <b>New:</b>
-  *  - Added TPI programming support for 6-pin ATTINY to the AVRISP programmer project
+  *  - Added incomplete MIDIToneGenerator project
+  *  - Added new Relay Controller Board project (thanks to OBinou)
+  *  - Added board hardware driver support for the Teensy, USBTINY MKII, Benito and JM-DB-U2 lines of third party USB AVR boards
+  *
+  *  <b>Changed:</b>
+  *  - AVRISP programmer project now has a more robust timeout system, allowing for an increase of the software USART speed
+  *    for PDI and TPI programming
+  *  - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond
+  *  - Webserver project now uses the board LEDs to indicate the current IP configuration state
+  *  - Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired
+  *  - Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.)
+  *  - Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.
+  *  - Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders
+  *    and projects
+  *  - All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed
+  *  - Added LIBUSB_FILTERDRV_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows
+  *    builds of avrdude at the expense of AVRStudio compatibility
+  *
+  *  <b>Fixed:</b>
+  *  - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin
+  *  - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register
+  *  - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus
+  *  - Fixed ADC routines not correctly returning the last result when multiple channels were read
+  *  - Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the
+  *    U4 series USB AVR parts
+  *  - Fixed LowLevel MassStorage demo broken on the U2 series USB AVRs due to unsupported double-banked endpoint modes used
+  *  - Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian)
+  *  - Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment
+  *  - Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending
+  *    a valid session ID to the device
+  *
+  *  \section Sec_ChangeLog100219 Version 100219
+  *
+  *  <b>New:</b>
+  *  - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light)
   *  - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected
   *    to a target
   *  - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to
@@ -17,21 +51,50 @@
   *  - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to
   *    sent or received in packed form in a single USB packet
   *  - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events
+  *  - Added master mode hardware TWI driver for easy TWI peripheral control
+  *  - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks
+  *    as on some models, the channel number is not identical to its single-ended ADC MUX mask
+  *  - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library
+  *  - New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which
+  *    do not adversely affect the code operation (currently only the LEDs driver)
+  *  - Added keyboard modifier masks (HID_KEYBOARD_MODIFER_*) and LED report masks (KEYBOARD_LED_*) to the HID class driver and
+  *    Keyboard demos
+  *  - Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses
   *
   *  <b>Changed:</b>
-  *  - Slowed down PDI programming in the AVRISP project to prevent transmission errors
+  *  - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors
   *  - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion
   *  - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target
   *    reset
   *  - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track
   *    of elapsed milliseconds
   *  - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space
+  *  - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's
+  *    TDI pin to determine which mode to use
+  *  - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter
   *
   *  <b>Fixed:</b>
   *  - Fixed AVRISP project not able to enter programming mode when ISP protocol is used
   *  - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit
   *  - Fixed ADC_IsReadingComplete() returning an inverted result
   *  - Fixed blocking CDC streams not aborting when the host is disconnected
+  *  - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands
+  *  - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa)
+  *  - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato)
+  *  - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
+  *  - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
+  *  - Fixed Benito project not resetting the target AVR automatically when programming has completed
+  *  - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming
+  *    ranges are specified (thanks to Thomas Bleeker)
+  *  - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe
+  *  - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account
+  *  - Fixed EEPROM and FLASH ISP programming in the AVRISP project
+  *  - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen)
+  *  - Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF
+  *  - Fixed SerialStream driver not setting stdin to the created serial stream (thanks to Mike Alexander)
+  *  - Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes
+  *  - Fixed AVRISP project not extending the command delay after each successful page/word/byte program
+  *  - Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baudrates (thanks to Renaud Cerrato)
   *
   *  \section Sec_ChangeLog091223 Version 091223
   *
@@ -94,8 +157,9 @@
   *  - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert)
   *  - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be
   *    used (thanks to Daniel Levy)
-  *  - Fixed TeensyHID bootloader not enumerating to the host correctly
+  *  - Fixed TeensyHID bootloader not enumerating to the host correctly (thanks to Clint Fisher)
   *  - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott)
+  *  - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell)
   *
   *  \section Sec_ChangeLog091122 Version 091122
   *