X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/ecf7538430c01b95104682f0f7493e57b9168125..ed031c1df2f5b053b9cd9f48c63e66a42b7c049e:/Demos/USBtoSerial/USBtoSerial.c diff --git a/Demos/USBtoSerial/USBtoSerial.c b/Demos/USBtoSerial/USBtoSerial.c deleted file mode 100644 index c7c9e4b04..000000000 --- a/Demos/USBtoSerial/USBtoSerial.c +++ /dev/null @@ -1,399 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "USBtoSerial.h" - -/* Project Tags, for reading out using the ButtLoad project */ -BUTTLOADTAG(ProjName, "LUFA USB RS232 App"); -BUTTLOADTAG(BuildTime, __TIME__); -BUTTLOADTAG(BuildDate, __DATE__); -BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING); - -/* Scheduler Task List */ -TASK_LIST -{ - { Task: USB_USBTask , TaskStatus: TASK_STOP }, - { Task: CDC_Task , TaskStatus: TASK_STOP }, -}; - -/* Globals: */ -/** Contains the current baud rate and other settings of the virtual serial port. - * - * These values are set by the host via a class-specific request, and the physical USART should be reconfigured to match the - * new settings each time they are changed by the host. - */ -CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600, - CharFormat: OneStopBit, - ParityType: Parity_None, - DataBits: 8 }; - -/** Ring (circular) buffer to hold the RX data - data from the host to the attached device on the serial port. */ -RingBuff_t Rx_Buffer; - -/** Ring (circular) buffer to hold the TX data - data from the attached device on the serial port to the host. */ -RingBuff_t Tx_Buffer; - -/** Flag to indicate if the USART is currently transmitting data from the Rx_Buffer circular buffer. */ -volatile bool Transmitting = false; - -/** Main program entry point. This routine configures the hardware required by the application, then - * starts the scheduler to run the application tasks. - */ -int main(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - LEDs_Init(); - ReconfigureUSART(); - - /* Ringbuffer Initialization */ - Buffer_Initialize(&Rx_Buffer); - Buffer_Initialize(&Tx_Buffer); - - /* Indicate USB not ready */ - UpdateStatus(Status_USBNotReady); - - /* Initialize Scheduler so that it can be used */ - Scheduler_Init(); - - /* Initialize USB Subsystem */ - USB_Init(); - - /* Scheduling - routine never returns, so put this last in the main function */ - Scheduler_Start(); -} - -/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and - * starts the library USB task to begin the enumeration and USB management process. - */ -EVENT_HANDLER(USB_Connect) -{ - /* Start USB management task */ - Scheduler_SetTaskMode(USB_USBTask, TASK_RUN); - - /* Indicate USB enumerating */ - UpdateStatus(Status_USBEnumerating); -} - -/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via - * the status LEDs and stops the USB management and CDC management tasks. - */ -EVENT_HANDLER(USB_Disconnect) -{ - /* Stop running CDC and USB management tasks */ - Scheduler_SetTaskMode(CDC_Task, TASK_STOP); - Scheduler_SetTaskMode(USB_USBTask, TASK_STOP); - - /* Reset Tx and Rx buffers, device disconnected */ - Buffer_Initialize(&Rx_Buffer); - Buffer_Initialize(&Tx_Buffer); - - /* Indicate USB not ready */ - UpdateStatus(Status_USBNotReady); -} - -/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration - * of the USB device after enumeration - the device endpoints are configured and the CDC management task started. - */ -EVENT_HANDLER(USB_ConfigurationChanged) -{ - /* Setup CDC Notification, Rx and Tx Endpoints */ - Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE, - ENDPOINT_BANK_SINGLE); - - Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE); - - Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE); - - /* Indicate USB connected and ready */ - UpdateStatus(Status_USBReady); - - /* Start CDC task */ - Scheduler_SetTaskMode(CDC_Task, TASK_RUN); -} - -/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific - * control requests that are not handled internally by the USB library (including the CDC control commands, - * which are all issued via the control endpoint), so that they can be handled appropriately for the application. - */ -EVENT_HANDLER(USB_UnhandledControlPacket) -{ - uint8_t* LineCodingData = (uint8_t*)&LineCoding; - - /* Process CDC specific control requests */ - switch (bRequest) - { - case REQ_GetLineEncoding: - if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { - /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSetupReceived(); - - /* Write the line coding data to the control endpoint */ - Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(LineCoding)); - - /* Finalize the stream transfer to send the last packet or clear the host abort */ - Endpoint_ClearSetupOUT(); - } - - break; - case REQ_SetLineEncoding: - if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { - /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSetupReceived(); - - /* Read the line coding data in from the host into the global struct */ - Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(LineCoding)); - - /* Finalize the stream transfer to clear the last packet from the host */ - Endpoint_ClearSetupIN(); - - /* Reconfigure the USART with the new settings */ - ReconfigureUSART(); - } - - break; - case REQ_SetControlLineState: - if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { -#if 0 - /* NOTE: Here you can read in the line state mask from the host, to get the current state of the output handshake - lines. The mask is read in from the wValue parameter, and can be masked against the CONTROL_LINE_OUT_* masks - to determine the RTS and DTR line states using the following code: - */ - - uint16_t wIndex = Endpoint_Read_Word_LE(); - - // Do something with the given line states in wIndex -#endif - - /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSetupReceived(); - - /* Acknowledge status stage */ - while (!(Endpoint_IsSetupINReady())); - Endpoint_ClearSetupIN(); - } - - break; - } -} - -/** Task to manage CDC data transmission and reception to and from the host, from and to the physical USART. */ -TASK(CDC_Task) -{ - if (USB_IsConnected) - { -#if 0 - /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232 - handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code: - */ - - USB_Notification_Header_t Notification = (USB_Notification_Header_t) - { - NotificationType: (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE), - Notification: NOTIF_SerialState, - wValue: 0, - wIndex: 0, - wLength: sizeof(uint16_t), - }; - - uint16_t LineStateMask; - - // Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host - - Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); - Endpoint_Write_Stream_LE(&Notification, sizeof(Notification)); - Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask)); - Endpoint_ClearCurrentBank(); -#endif - - /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); - - if (Endpoint_ReadWriteAllowed()) - { - /* Read the received data endpoint into the transmission buffer */ - while (Endpoint_BytesInEndpoint()) - { - /* Wait until the buffer has space for a new character */ - while (!((BUFF_STATICSIZE - Rx_Buffer.Elements))); - - /* Store each character from the endpoint */ - Buffer_StoreElement(&Rx_Buffer, Endpoint_Read_Byte()); - } - - /* Clear the endpoint buffer */ - Endpoint_ClearCurrentBank(); - } - - /* Check if Rx buffer contains data */ - if (Rx_Buffer.Elements) - { - /* Initiate the transmission of the buffer contents if USART idle */ - if (!(Transmitting)) - { - Transmitting = true; - Serial_TxByte(Buffer_GetElement(&Rx_Buffer)); - } - } - - /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); - - /* Check if the Tx buffer contains anything to be sent to the host */ - if (Tx_Buffer.Elements) - { - /* Wait until Serial Tx Endpoint Ready for Read/Write */ - while (!(Endpoint_ReadWriteAllowed())); - - /* Check before sending the data if the endpoint is completely full */ - bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE); - - /* Write the transmission buffer contents to the received data endpoint */ - while (Tx_Buffer.Elements && (Endpoint_BytesInEndpoint() < CDC_TXRX_EPSIZE)) - Endpoint_Write_Byte(Buffer_GetElement(&Tx_Buffer)); - - /* Send the data */ - Endpoint_ClearCurrentBank(); - - /* If a full endpoint was sent, we need to send an empty packet afterwards to terminate the transfer */ - if (IsFull) - { - /* Wait until Serial Tx Endpoint Ready for Read/Write */ - while (!(Endpoint_ReadWriteAllowed())); - - /* Send an empty packet to terminate the transfer */ - Endpoint_ClearCurrentBank(); - } - } - } -} - -/** ISR to handle the USART transmit complete interrupt, fired each time the USART has sent a character. This reloads the USART - * data register with the next byte from the Rx_Buffer circular buffer if a character is available, or stops the transmission if - * the buffer is currently empty. - */ -ISR(USART1_TX_vect, ISR_BLOCK) -{ - /* Send next character if available */ - if (Rx_Buffer.Elements) - UDR1 = Buffer_GetElement(&Rx_Buffer); - else - Transmitting = false; -} - -/** ISR to handle the USART receive complete interrupt, fired each time the USART has received a character. This stores the received - * character into the Tx_Buffer circular buffer for later transmission to the host. - */ -ISR(USART1_RX_vect, ISR_BLOCK) -{ - /* Only store received characters if the USB interface is connected */ - if (USB_IsConnected) - { - /* Character received, store it into the buffer */ - Buffer_StoreElement(&Tx_Buffer, UDR1); - } -} - -/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to - * log to a serial port, or anything else that is suitable for status updates. - * - * \param CurrentStatus Current status of the system, from the USBtoSerial_StatusCodes_t enum - */ -void UpdateStatus(uint8_t CurrentStatus) -{ - uint8_t LEDMask = LEDS_NO_LEDS; - - /* Set the LED mask to the appropriate LED mask based on the given status code */ - switch (CurrentStatus) - { - case Status_USBNotReady: - LEDMask = (LEDS_LED1); - break; - case Status_USBEnumerating: - LEDMask = (LEDS_LED1 | LEDS_LED2); - break; - case Status_USBReady: - LEDMask = (LEDS_LED2 | LEDS_LED4); - break; - } - - /* Set the board LEDs to the new LED mask */ - LEDs_SetAllLEDs(LEDMask); -} - -/** Reconfigures the USART to match the current serial port settings issued by the host as closely as possible. */ -void ReconfigureUSART(void) -{ - uint8_t ConfigMask = 0; - - /* Determine parity - non odd/even parity mode defaults to no parity */ - if (LineCoding.ParityType == Parity_Odd) - ConfigMask = ((1 << UPM11) | (1 << UPM10)); - else if (LineCoding.ParityType == Parity_Even) - ConfigMask = (1 << UPM11); - - /* Determine stop bits - 1.5 stop bits is set as 1 stop bit due to hardware limitations */ - if (LineCoding.CharFormat == TwoStopBits) - ConfigMask |= (1 << USBS1); - - /* Determine data size - 5, 6, 7, or 8 bits are supported */ - if (LineCoding.DataBits == 6) - ConfigMask |= (1 << UCSZ10); - else if (LineCoding.DataBits == 7) - ConfigMask |= (1 << UCSZ11); - else if (LineCoding.DataBits == 8) - ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); - - /* Enable double speed, gives better error percentages at 8MHz */ - UCSR1A = (1 << U2X1); - - /* Enable transmit and receive modules and interrupts */ - UCSR1B = ((1 << TXCIE1) | (1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); - - /* Set the USART mode to the mask generated by the Line Coding options */ - UCSR1C = ConfigMask; - - /* Set the USART baud rate register to the desired baud rate value */ - UBRR1 = SERIAL_2X_UBBRVAL((uint16_t)LineCoding.BaudRateBPS); -}