X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/cae0fa73d70f82820bd8d71c4d60b6aff8ccf3cb..e572ee7ff271a3f454fcd8a5fb0d2079bbda4be2:/Bootloaders/HID/BootloaderHID.txt

diff --git a/Bootloaders/HID/BootloaderHID.txt b/Bootloaders/HID/BootloaderHID.txt
index 9b47ff3c6..d69582212 100644
--- a/Bootloaders/HID/BootloaderHID.txt
+++ b/Bootloaders/HID/BootloaderHID.txt
@@ -48,12 +48,31 @@
  *
  *  This bootloader enumerates to the host as a HID Class device, allowing for device FLASH programming through
  *  the supplied command line software, which is a modified version of Paul's TeensyHID Command Line loader code
- *  from PJRC, used with permission. This bootloader is delibertely non-compatible with the properietary HalfKay
- *  bootloader GUI; only the command line interface software accompanying this bootloader will work with it.
+ *  from PJRC (used with permission). This bootloader is deliberatley non-compatible with the properietary PJRC
+ *  HalfKay bootloader GUI; only the command line interface software accompanying this bootloader will work with it.
  *  
- *  Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
- *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
- *  values in the accompanying makefile.
+ *  Out of the box this bootloader builds for the USB1287, and will fit into 2KB of bootloader space for the
+ *  Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for all other models. If you wish to
+ *  enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU values in the
+ *  accompanying makefile.
+ *
+ *  \section Sec_Installation Driver Installation
+ *
+ *  This bootloader uses the HID class driver inbuilt into all modern operating systems, thus no additional drivers
+ *  need to be supplied for correct operation.
+ *
+ *  \section Sec_HostApp Host Controller Application
+ *
+ *  Due to licensing issues, the supplied bootloader is compatible with the HalfKay bootloader protocol designed
+ *  by PJRC, but is non-compatible with the cross-platform loader GUI. A modified version of the open source
+ *  cross-platform TeensyLoader application is supplied, which can be compiled under most operating systems. The
+ *  command-line loader application should remain compatible with genuine Teensy boards in addition to boards using
+ *  this custom bootloader.
+ *
+ *  Once compiled, programs can be loaded into the AVR's FLASH memory through the following example command:
+ *  \code
+ *  hid_bootloader_cli -mmcu=at90usb1287 Mouse.hex
+ *  \endcode
  *
  *  \section SSec_Options Project Options
  *