X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/c31fdbd03eee95660d65adb0f1bf7c0c397fd435..refs/heads/master:/Demos/Device/ClassDriver/AudioInput/AudioInput.txt

diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
index fea95b0c8..4b0594244 100644
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
@@ -50,7 +50,7 @@
  *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
  *  required).
  *
- *  On start-up the system will automatically enumerate and function as a 
+ *  On start-up the system will automatically enumerate and function as a
  *  USB microphone. By default, the demo will produce a square wave test tone
  *  when the board button is pressed. If USE_TEST_TONE is not defined in the
  *  project makefile, incoming audio from the ADC channel 1 will be sampled
@@ -67,19 +67,24 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>USE_TEST_TONE</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>
  *  </table>