X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/c31fdbd03eee95660d65adb0f1bf7c0c397fd435..7464e40a4ba3470c12001069bbe5f31db209dc4d:/Bootloaders/CDC/BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index e88a7fba8..379988f9e 100644
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -111,12 +111,18 @@
  *  #define BOOTLOADER_MAGIC_SIGNATURE         0xDCFB
  *
  *  #define BOOTLOADER_CLASS_SIGNATURE_START   (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4))
- *  #define BOOTLOADER_CDC_SIGNATURE           0xCDC1
+ *  #define BOOTLOADER_CDC_SIGNATURE           0xDF00
  *
  *  #define BOOTLOADER_ADDRESS_START           (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8))
  *  #define BOOTLOADER_ADDRESS_LENGTH          4
  *  \endcode
  *
+ *  From the application the API support of the bootloader can be detected by reading the FLASH memory bytes located at address
+ *  \c BOOTLOADER_MAGIC_SIGNATURE_START and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader
+ *  can be determined by reading the FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them
+ *  to the value \c BOOTLOADER_CDC_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes of FLASH
+ *  memory starting from address \c BOOTLOADER_ADDRESS_START.
+ *
  *  \subsection SSec_API_MemLayout Device Memory Map
  *  The following illustration indicates the final memory map of the device when loaded with the bootloader.
  *
@@ -155,11 +161,25 @@
  *  +----------------------------+ FLASHEND
  *  \endverbatim
  *
- *  Bootloaders reporting a device release revision number of 1.00 or greater are bootloader API enabled. From the application
- *  the API support of the bootloader can be detected by reading the FLASH memory bytes located at address \c BOOTLOADER_MAGIC_SIGNATURE_START
- *  and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader can be determined by reading the
- *  FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them to the value \c BOOTLOADER_CDC_SIGNATURE.
- *  The start address of the bootloader can be retrieved by reading the bytes of FLASH memory starting from address \c BOOTLOADER_ADDRESS_START.
+ *  \section Sec_KnownIssues Known Issues:
+ *
+ *  \par On Linux machines, the CDC bootloader is unstable or inaccessible.
+ *  A change to the \c ModemManager module in many Linux distributions causes
+ *  this module to try to take control over inserted CDC devices, corrupting the
+ *  datastream. A UDEV rule is required to prevent this.
+ *  See <a href=https://groups.google.com/d/msg/lufa-support/CP9cy2bc8yo/kBqsOu-RBeMJ>here</a> for resolution steps.
+ *
+ *  \par On Linux machines, the CDC bootloader is inaccessible.
+ *  On many Linux systems, non-root users do not have automatic access to newly
+ *  inserted CDC devices. Root privileges or a UDEV rule is required to gain
+ *  access.
+ *  See <a href=https://groups.google.com/d/msg/lufa-support/CP9cy2bc8yo/kBqsOu-RBeMJ>here</a> for resolution steps.
+ *
+ *  \par After loading an application, it is not run automatically on startup.
+ *  Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader
+ *  to run automatically when the device is reset. In most cases, the BOOTRST
+ *  fuse should be disabled and the HWBE fuse used instead to run the bootloader
+ *  when needed.
  *
  *  \section Sec_Options Project Options
  *
@@ -173,25 +193,25 @@
  *   </tr>
  *   <tr>
  *    <td>NO_BLOCK_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
  *        using the byte-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_EEPROM_BYTE_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
  *        to be made using the block-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_FLASH_BYTE_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
  *        to be made using the block-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>
  *   </tr>
  *  </table>