X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/c1a1b6eeecb375259968ef6d989833312047f2d8..d47df1cd3a340306255b26a7112d7ff7fa6cd4e4:/Bootloaders/CDC/BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index cb6f9f01f..1122e73ae 100644
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -5,15 +5,10 @@
  */
  
 /** \mainpage CDC Class USB AVR Bootloader
- * 
- * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
- * protocol compatible programming software to load firmware onto the AVR.	
- *  
- * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
- * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
- * values in the accompanying makefile.
- *  
- * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
  *
  * <table>
  *  <tr>
@@ -37,4 +32,34 @@
  *   <td>Full Speed Mode</td>
  *  </tr>
  * </table>
- */
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
+ * protocol compatible programming software to load firmware onto the AVR.	
+ *  
+ * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
+ * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
+ * values in the accompanying makefile.
+ *  
+ * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG.
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>SIGNATURE_0, SIGNATURE_1, SIGNATURE_2</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>AVR part signature bytes. These are normally defined as part of the AVR device header files in recent avr-libc
+ *        distributions. If your avr-libc library is out of date and does not define these values, you can define them
+ *        manually in the makefile CDEFS.</td>
+ *   </tr>
+ *  </table>
+ */
\ No newline at end of file