X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/a8b66f318dda3cc18dfcedaa3af3d01ab68b82e8..refs/heads/master:/Demos/Device/ClassDriver/AudioInput/AudioInput.txt

diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
index fd94748d6..4b0594244 100644
--- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
+++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
@@ -10,9 +10,9 @@
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
- *  - Series 6 USB AVRs (AT90USBxxx6)
- *  - Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
  *
  *  \section Sec_Info USB Information:
  *
@@ -38,7 +38,7 @@
  *        USBIF Audio 1.0 Data Formats Specification</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
@@ -50,7 +50,7 @@
  *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
  *  required).
  *
- *  On start-up the system will automatically enumerate and function as a 
+ *  On start-up the system will automatically enumerate and function as a
  *  USB microphone. By default, the demo will produce a square wave test tone
  *  when the board button is pressed. If USE_TEST_TONE is not defined in the
  *  project makefile, incoming audio from the ADC channel 1 will be sampled
@@ -67,26 +67,26 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
+ *   </tr>
+ *   <tr>
+ *    <td>MIC_IN_ADC_CHANNEL</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>USE_TEST_TONE</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
  *        instead of sampling the board microphone.</td>
  *   </tr>
  *   <tr>
  *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
  *   </tr>
- *   <tr>
- *    <td>AUDIO_SAMPLE_FREQUENCY</td>
- *    <td>Descriptors.h</td>
- *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
- *   </tr>
  *  </table>
  */