X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/a8b66f318dda3cc18dfcedaa3af3d01ab68b82e8..51d3adfe1869e4a45c8368bb00a485be052eecdb:/Projects/Benito/Benito.txt

diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt
index f1a4f6acd..07bec52b3 100644
--- a/Projects/Benito/Benito.txt
+++ b/Projects/Benito/Benito.txt
@@ -10,10 +10,10 @@
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
- *  - Series 6 USB AVRs (AT90USBxxx6)
- *  - Series 4 USB AVRs (ATMEGAxxU4)
- *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
  *  \section Sec_Info USB Information:
  *
@@ -38,7 +38,7 @@
  *       Arduino Bootloader Specification</td>
  *  </tr>
  *  <tr>
- *   <td><b>Usable Speeds:</b></td>
+ *   <td><b>Supported USB Speeds:</b></td>
  *   <td>Full Speed Mode</td>
  *  </tr>
  * </table>
@@ -62,43 +62,43 @@
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>AVR_RESET_LINE_PORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td>
  *   </tr>
  *   <tr>
  *    <td>AVR_RESET_LINE_DDR</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td>
  *   </tr>
  *   <tr>
  *    <td>AVR_RESET_LINE_MASK</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td>
  *   </tr>
  *   <tr>
  *    <td>AVR_RESET_PULSE_MS</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Pulse length in milliseconds for the target /RESET pulse.</td>
  *   </tr>
  *   <tr>
  *    <td>TX_RX_LED_PULSE_MS</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
  *   </tr>
  *   <tr>
  *    <td>PING_PONG_LED_PULSE_MS</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td>
  *   </tr>
  *   <tr>
  *    <td>RECEIVE_BUFFER_FLUSH_MS</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Period between flushings of received data buffer to the attached USB host.</td>
  *   </tr>
  *  </table>