X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/7a9b3d3641e1bc97d2826b4865b3cedb11099e62..cf22a744ec0da3b68c4ffdb14c6fa43f2e07542f:/Demos/Device/LowLevel/VirtualSerial/CDC.c?ds=sidebyside diff --git a/Demos/Device/LowLevel/VirtualSerial/CDC.c b/Demos/Device/LowLevel/VirtualSerial/CDC.c deleted file mode 100644 index 444dc019d..000000000 --- a/Demos/Device/LowLevel/VirtualSerial/CDC.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the CDC demo. This file contains the main tasks of the demo and - * is responsible for the initial application hardware configuration. - */ - -#include "CDC.h" - -/** Contains the current baud rate and other settings of the virtual serial port. While this demo does not use - * the physical USART and thus does not use these settings, they must still be retained and returned to the host - * upon request or the host will assume the device is non-functional. - * - * These values are set by the host via a class-specific request, however they are not required to be used accurately. - * It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical - * serial link characteristics and instead sends and receives data in endpoint streams. - */ -CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0, - .CharFormat = OneStopBit, - .ParityType = Parity_None, - .DataBits = 8 }; - - -#if 0 -/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in - * can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string). - */ - -static int CDC_putchar(char c, FILE *stream) -{ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); - - if (!(LineEncoding.BaudRateBPS)) - return -1; - - if (Endpoint_WaitUntilReady()) - return -1; - - Endpoint_Write_Byte(c); - Endpoint_ClearIN(); - - return 0; -} - -static int CDC_getchar(FILE *stream) -{ - int c; - - if (!(LineEncoding.BaudRateBPS)) - return -1; - - Endpoint_SelectEndpoint(CDC_RX_EPNUM); - - for (;;) - { - if (Endpoint_WaitUntilReady()) - return -1; - - if (!(Endpoint_BytesInEndpoint())) - { - Endpoint_ClearOUT(); - } - else - { - c = Endpoint_Read_Byte(); - break; - } - } - - return c; -} - -static FILE USBSerial = FDEV_SETUP_STREAM(CDC_putchar, CDC_getchar, _FDEV_SETUP_RW); -#endif - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - - for (;;) - { - CDC_Task(); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - Joystick_Init(); - LEDs_Init(); - USB_Init(); -} - -/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and - * starts the library USB task to begin the enumeration and USB management process. - */ -void EVENT_USB_Device_Connect(void) -{ - /* Indicate USB enumerating */ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via - * the status LEDs and stops the USB management and CDC management tasks. - */ -void EVENT_USB_Device_Disconnect(void) -{ - /* Indicate USB not ready */ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration - * of the USB device after enumeration - the device endpoints are configured and the CDC management task started. - */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - /* Indicate USB connected and ready */ - LEDs_SetAllLEDs(LEDMASK_USB_READY); - - /* Setup CDC Notification, Rx and Tx Endpoints */ - if (!(Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE, - ENDPOINT_BANK_SINGLE))) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - } - - if (!(Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE))) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - } - - if (!(Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE))) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - } - - /* Reset line encoding baud rate so that the host knows to send new values */ - LineEncoding.BaudRateBPS = 0; -} - -/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific - * control requests that are not handled internally by the USB library (including the CDC control commands, - * which are all issued via the control endpoint), so that they can be handled appropriately for the application. - */ -void EVENT_USB_Device_UnhandledControlRequest(void) -{ - /* Process CDC specific control requests */ - switch (USB_ControlRequest.bRequest) - { - case REQ_GetLineEncoding: - if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { - /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSETUP(); - - /* Write the line coding data to the control endpoint */ - Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t)); - - /* Finalize the stream transfer to send the last packet or clear the host abort */ - Endpoint_ClearOUT(); - } - - break; - case REQ_SetLineEncoding: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { - /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSETUP(); - - /* Read the line coding data in from the host into the global struct */ - Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t)); - - /* Finalize the stream transfer to clear the last packet from the host */ - Endpoint_ClearIN(); - } - - break; - case REQ_SetControlLineState: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { - /* Acknowledge the SETUP packet, ready for data transfer */ - Endpoint_ClearSETUP(); - - /* NOTE: Here you can read in the line state mask from the host, to get the current state of the output handshake - lines. The mask is read in from the wValue parameter in USB_ControlRequest, and can be masked against the - CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code: - */ - - Endpoint_ClearStatusStage(); - } - - break; - } -} - -/** Function to manage CDC data transmission and reception to and from the host. */ -void CDC_Task(void) -{ - char* ReportString = NULL; - uint8_t JoyStatus_LCL = Joystick_GetStatus(); - static bool ActionSent = false; - - /* Device must be connected and configured for the task to run */ - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - -#if 0 - /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232 - * handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code: - */ - USB_Notification_Header_t Notification = (USB_Notification_Header_t) - { - .NotificationType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE), - .Notification = NOTIF_SerialState, - .wValue = 0, - .wIndex = 0, - .wLength = sizeof(uint16_t), - }; - - uint16_t LineStateMask; - - // Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host - - Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); - Endpoint_Write_Stream_LE(&Notification, sizeof(Notification)); - Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask)); - Endpoint_ClearIN(); -#endif - - /* Determine if a joystick action has occurred */ - if (JoyStatus_LCL & JOY_UP) - ReportString = "Joystick Up\r\n"; - else if (JoyStatus_LCL & JOY_DOWN) - ReportString = "Joystick Down\r\n"; - else if (JoyStatus_LCL & JOY_LEFT) - ReportString = "Joystick Left\r\n"; - else if (JoyStatus_LCL & JOY_RIGHT) - ReportString = "Joystick Right\r\n"; - else if (JoyStatus_LCL & JOY_PRESS) - ReportString = "Joystick Pressed\r\n"; - else - ActionSent = false; - - /* Flag management - Only allow one string to be sent per action */ - if ((ReportString != NULL) && (ActionSent == false) && LineEncoding.BaudRateBPS) - { - ActionSent = true; - - /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); - - /* Write the String to the Endpoint */ - Endpoint_Write_Stream_LE(ReportString, strlen(ReportString)); - - /* Remember if the packet to send completely fills the endpoint */ - bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE); - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); - - /* If the last packet filled the endpoint, send an empty packet to release the buffer on - * the receiver (otherwise all data will be cached until a non-full packet is received) */ - if (IsFull) - { - /* Wait until the endpoint is ready for another packet */ - Endpoint_WaitUntilReady(); - - /* Send an empty packet to ensure that the host does not buffer data sent to it */ - Endpoint_ClearIN(); - } - } - - /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); - - /* Throw away any received data from the host */ - if (Endpoint_IsOUTReceived()) - Endpoint_ClearOUT(); -}