X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/5ec9d04bcaa0f48098441f36dd6d048ff32ecb99..8edd56194859c47fe3d779594dfe1ece7076613c:/Bootloaders/DFU/BootloaderDFU.txt

diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt
index 538214e90..b6ba45553 100644
--- a/Bootloaders/DFU/BootloaderDFU.txt
+++ b/Bootloaders/DFU/BootloaderDFU.txt
@@ -12,8 +12,8 @@
  *
  *  \li Series 7 USB AVRs (AT90USBxxx7)
  *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4) - <i>See \ref SSec_Aux_Space</i>
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - <i>See \ref SSec_Aux_Space</i>
  *
  *  \section Sec_Info USB Information:
  *
@@ -38,7 +38,8 @@
  *  </tr>
  *  <tr>
  *   <td><b>Supported USB Speeds:</b></td>
- *   <td>Full Speed Mode</td>
+ *   <td>Low Speed Mode \n
+ *       Full Speed Mode</td>
  *  </tr>
  * </table>
  *
@@ -67,7 +68,7 @@
  *        manually change them in Descriptors.c and alter your driver's INF file accordingly.
  *
  *  \section Sec_HostApp Host Controller Application
- *  
+ *
  *  This bootloader is compatible with Atmel's FLIP utility on Windows machines, and dfu-programmer on Linux machines.
  *
  *  \subsection SSec_FLIP FLIP (Windows)
@@ -103,7 +104,7 @@
  *  #define BOOTLOADER_API_TABLE_SIZE          32
  *  #define BOOTLOADER_API_TABLE_START         ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE)
  *  #define BOOTLOADER_API_CALL(Index)         (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2)
- *  
+ *
  *  void    (*BootloaderAPI_ErasePage)(uint32_t Address)               = BOOTLOADER_API_CALL(0);
  *  void    (*BootloaderAPI_WritePage)(uint32_t Address)               = BOOTLOADER_API_CALL(1);
  *  void    (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2);
@@ -111,13 +112,13 @@
  *  uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address)                = BOOTLOADER_API_CALL(4);
  *  uint8_t (*BootloaderAPI_ReadLock)(void)                            = BOOTLOADER_API_CALL(5);
  *  void    (*BootloaderAPI_WriteLock)(uint8_t LockBits)               = BOOTLOADER_API_CALL(6);
- *  
+ *
  *  #define BOOTLOADER_MAGIC_SIGNATURE_START   (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2))
  *  #define BOOTLOADER_MAGIC_SIGNATURE         0xDCFB
- *  
+ *
  *  #define BOOTLOADER_CLASS_SIGNATURE_START   (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4))
- *  #define BOOTLOADER_CDC_SIGNATURE           0xDFB1
- *  
+ *  #define BOOTLOADER_DFU_SIGNATURE           0xDF10
+ *
  *  #define BOOTLOADER_ADDRESS_START           (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8))
  *  #define BOOTLOADER_ADDRESS_LENGTH          4
  *  \endcode
@@ -125,7 +126,7 @@
  *  From the application the API support of the bootloader can be detected by reading the FLASH memory bytes located at address
  *  \c BOOTLOADER_MAGIC_SIGNATURE_START and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader
  *  can be determined by reading the FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them
- *  to the value \c BOOTLOADER_CDC_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes of FLASH
+ *  to the value \c BOOTLOADER_DFU_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes of FLASH
  *  memory starting from address \c BOOTLOADER_ADDRESS_START.
  *
  *  \subsection SSec_API_MemLayout Device Memory Map
@@ -149,6 +150,16 @@
  *  |                            |
  *  |                            |
  *  |                            |
+ *  |                            |
+ *  +----------------------------+ FLASHEND - BOOT_AUX_SECTION_SIZE
+ *  | Booloader Start Trampoline |
+ *  | (Not User App. Accessible) |
+ *  +----------------------------+ FLASHEND - (BOOT_AUX_SECTION_SIZE - 4)
+ *  |                            |
+ *  |     Auxillery Bootloader   |
+ *  |  Space for Smaller Devices |
+ *  | (Not User App. Accessible) |
+ *  |                            |
  *  +----------------------------+ FLASHEND - BOOT_SECTION_SIZE
  *  |                            |
  *  |   Bootloader Application   |
@@ -166,15 +177,33 @@
  *  +----------------------------+ FLASHEND
  *  \endverbatim
  *
+ *  \subsection SSec_Aux_Space Auxiliary Bootloader Section
+ *  To make the bootloader function on smaller devices (those with a physical
+ *  bootloader section of smaller than 6KB)
+ *
+ *  \section Sec_KnownIssues Known Issues:
+ *
+ *  \par On Linux machines, the DFU bootloader is inaccessible.
+ *  On many Linux systems, non-root users do not have automatic access to newly
+ *  inserted DFU devices. Root privileges or a UDEV rule is required to gain
+ *  access.
+ *  See <a href=https://groups.google.com/d/msg/lufa-support/CP9cy2bc8yo/kBqsOu-RBeMJ>here</a> for resolution steps.
+ *
+ *  \par After loading an application, it is not run automatically on startup.
+ *  Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader
+ *  to run automatically when the device is reset. In most cases, the BOOTRST
+ *  fuse should be disabled and the HWBE fuse used instead to run the bootloader
+ *  when needed.
+ *
  *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>SECURE_MODE</td>