X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/4cc7f5200beef90c39c8c8310ed7c8b849afb4d9..bea72a8412f99b294c00341fa16a8308bcc66f15:/LUFA/ManPages/ChangeLog.txt

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 6b1090d02..e16a33de5 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -10,6 +10,20 @@
   *  <b>New:</b>
   *  - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
   *    not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
+  *  - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
+  *  - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
+  *  - Added board hardware driver support for the Kernel Concepts USBFOO development board
+  *  - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
+  *  - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
+  *    handling of USB Start of Frame events while in USB Host mode
+  *  - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
+  *    Print Host Class driver
+  *  - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
+  *  - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
+  *  - Added board hardware driver support for the Linnix UDIP development board
+  *  - Added board hardware driver support for the Busware BUI development board
+  *  - Added board hardware driver support for the Arduino Uno development board
+  *  - Added board hardware driver support for the Busware CUL V3 868MHZ radio board
   *
   *  <b>Changed:</b>
   *  - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
@@ -23,6 +37,16 @@
   *  - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
   *    transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
   *    not break communications with the host by exceeding the maximum control request stage timeout period
+  *  - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
+  *    the need for extra casting inside the callback (thanks to Jonathan Kollasch)
+  *  - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
+  *  - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
+  *    to free up the Start of Frame flag for interrupt use in the user application
+  *  - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
+  *  - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
+  *  - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
+  *  - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
+  *  - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
   *
   *  <b>Fixed:</b>
   *  - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
@@ -33,6 +57,20 @@
   *    in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
   *  - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
   *    request handler
+  *  - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
+  *  - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
+  *  - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
+  *  - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
+  *  - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
+  *  - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
+  *  - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
+  *  - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
+  *  - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
+  *  - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
+  *  - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
+  *  - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
+  *  - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
+  *  - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
   *
   *  \section Sec_ChangeLog100807 Version 100807
   *  <b>New:</b>