X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/48400df13c7f9f4f0fd8e7f841d49f9502557cb1..88051e78a281f5776538558aec113ff2b66e056c:/Projects/AVRISP_Programmer/Sample_Programming_Session.txt

diff --git a/Projects/AVRISP_Programmer/Sample_Programming_Session.txt b/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
deleted file mode 100644
index b5af76ebb..000000000
--- a/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-ubuntu@ubuntu:~/LUFA/Bootloaders/LUFA_DFU_Bootloader_AT90USB162$  sudo avrdude -vv -F -P /dev/ttyACM0 -c avr910 -p usb162 -U flash:w:BootloaderDFU.hex
-
-avrdude: Version 5.5, compiled on May  9 2008 at 13:04:46
-         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
-
-         System wide configuration file is "/etc/avrdude.conf"
-         User configuration file is "/home/ubuntu/.avrduderc"
-         User configuration file does not exist or is not a regular file, skipping
-
-         Using Port            : /dev/ttyACM0
-         Using Programmer      : avr910
-         AVR Part              : AT90USB162
-         Chip Erase delay      : 9000 us
-         PAGEL                 : PD7
-         BS2                   : PA0
-         RESET disposition     : dedicated
-         RETRY pulse           : SCK
-         serial program mode   : yes
-         parallel program mode : yes
-         Timeout               : 200
-         StabDelay             : 100
-         CmdexeDelay           : 25
-         SyncLoops             : 32
-         ByteDelay             : 0
-         PollIndex             : 3
-         PollValue             : 0x53
-         Memory Detail         :
-
-                                  Block Poll               Page                       Polled
-           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
-           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
-           eeprom        65    10     8    0 no        512    4      0  9000  9000 0x00 0x00
-           flash         65     6   128    0 yes     16384  128    128  4500  4500 0x00 0x00
-           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
-           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
-           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
-           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
-           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
-           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
-
-         Programmer Type : avr910
-         Description     : Atmel Low Cost Serial Programmer
-
-Found programmer: Id = "AVR ISP"; type = S
-    Software Version = 2.3; Hardware Version = 1.0
-Programmer supports auto addr increment.
-
-Programmer supports the following devices:
-    Device code: 0x55 = ATtiny12
-    Device code: 0x56 = ATtiny15
-    Device code: 0x5e = ATtiny2313
-    Device code: 0x76 = ATMEGA8
-    Device code: 0x74 = ATMEGA6450
-    Device code: 0x72 = ATMEGA32
-    Device code: 0x45 = ATMEGA64
-    Device code: 0x74 = ATMEGA6450
-    Device code: 0x43 = ATMEGA128
-    Device code: 0x63 = ATMEGA162
-    Device code: 0x78 = ATMEGA169
-    Device code: 0x6c = AT90S4434
-    Device code: 0x38 = AT90S8515
-    Device code: 0x65 = (unknown)
-
-avrdude: warning: selected device is not supported by programmer: usb162
-avrdude: AVR device initialized and ready to accept instructions
-
-Reading | ################################################## | 100% 0.00s
-
-avrdude: Device signature = 0x1e9482
-avrdude: safemode: lfuse reads as 5E
-avrdude: safemode: hfuse reads as D9
-avrdude: safemode: efuse reads as F4
-avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
-         To disable this feature, specify the -D option.
-avrdude: erasing chip
-avrdude: reading input file "BootloaderDFU.hex"
-avrdude: input file BootloaderDFU.hex auto detected as Intel Hex
-avrdude: writing flash (16066 bytes):
-
-Writing | ################################################## | 100% 33.39s
-
-
-
-avrdude: 16066 bytes of flash written
-avrdude: verifying flash memory against BootloaderDFU.hex:
-avrdude: load data flash data from input file BootloaderDFU.hex:
-avrdude: input file BootloaderDFU.hex auto detected as Intel Hex
-avrdude: input file BootloaderDFU.hex contains 16066 bytes
-avrdude: reading on-chip flash data:
-
-Reading | ################################################## | 100% 16.07s
-
-
-
-avrdude: verifying ...
-avrdude: 16066 bytes of flash verified
-
-avrdude: safemode: lfuse reads as 5E
-avrdude: safemode: hfuse reads as D9
-avrdude: safemode: efuse reads as F4
-avrdude: safemode: Fuses OK
-
-avrdude done.  Thank you.
-