X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/092f82e06fc64436fd957b4b6b8d5ce33532efae..8f9b5ae00df6654490245d29d1fd703a90be382d:/LUFA/ManPages/ChangeLog.txt

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index e71a6f0d2..69b129de5 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -11,6 +11,29 @@
   *  - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
   *    not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
   *  - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
+  *  - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
+  *  - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
+  *    handling of USB Start of Frame events while in USB Host mode
+  *  - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
+  *    Print Host Class driver
+  *  - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
+  *  - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
+  *  - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
+  *  - Added board hardware driver support for the Kernel Concepts USBFOO development board
+  *  - Added board hardware driver support for the Linnix UDIP development board
+  *  - Added board hardware driver support for the Busware BUI development board
+  *  - Added board hardware driver support for the Arduino Uno development board
+  *  - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
+  *  - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
+  *  - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
+  *  - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
+  *  - Added default test tone generation mode to the Device mode AudioInput demos
+  *  - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
+  *    tasks for each driver is called
+  *  - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
+  *  - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
+  *  - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
+  *    CDC class bootloader
   *
   *  <b>Changed:</b>
   *  - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
@@ -26,6 +49,23 @@
   *    not break communications with the host by exceeding the maximum control request stage timeout period
   *  - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
   *    the need for extra casting inside the callback (thanks to Jonathan Kollasch)
+  *  - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
+  *  - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
+  *    to free up the Start of Frame flag for interrupt use in the user application
+  *  - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
+  *  - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
+  *  - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
+  *  - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
+  *  - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
+  *  - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
+  *  - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
+  *    the given endpoint
+  *  - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
+  *  - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
+  *  - All LowLevel demos changed to use the constants and types defined in the USB class drivers
+  *  - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
+  *  - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
+  *  - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
   *
   *  <b>Fixed:</b>
   *  - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
@@ -36,6 +76,23 @@
   *    in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
   *  - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
   *    request handler
+  *  - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
+  *  - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
+  *  - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
+  *  - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
+  *  - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
+  *  - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
+  *  - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
+  *  - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
+  *  - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
+  *  - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
+  *  - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
+  *  - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
+  *  - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
+  *  - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
+  *  - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
+  *  - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
+  *  - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
   *
   *  \section Sec_ChangeLog100807 Version 100807
   *  <b>New:</b>
@@ -170,7 +227,7 @@
   *    read (thanks to Andrei Krainev)
   *  - Fixed device state not being reset back to the default state if the host sets the address to 0
   *  - Fixed Set Configuration requests not being stalled until the host has set the device's address
-  *  - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the 
+  *  - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the
   *    HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set
   *  - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occurring while the control endpoint
   *    request is being processed, causing possible lockups if a USB interrupt occurs during a transfer
@@ -285,7 +342,7 @@
   *  - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a
   *    STALL to a GET MAX LUN request (thanks to Martin Luxen)
   *  - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting
-  *  - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow 
+  *  - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow
   *    devices from timing out the data pipes
   *  - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts
   *  - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing
@@ -362,7 +419,7 @@
   *  - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen
   *  - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID
   *  - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin)
-  *  
+  *
   *  <b>Changed:</b>
   *  - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested
   *    HID interface within the device, not all HID interfaces
@@ -441,7 +498,7 @@
   *  - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions
   *  - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options
   *  - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs
-  *  
+  *
   *  <b>Changed:</b>
   *  - Deprecated pseudo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)
   *  - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested
@@ -597,7 +654,7 @@
   *  - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button
   *  - Serial driver now correctly calculates the baud register value when in double speed mode
   *  - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values
-  *    
+  *
   *
   *  \section Sec_ChangeLog090401 Version 090401
   *
@@ -719,9 +776,9 @@
   *  - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library
   *  - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset
   *  - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices
-  *  - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver  
+  *  - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver
   *  - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster
-  *  - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal 
+  *  - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal
   *    right-handed system
   *  - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in
   *    the demos, but the example code and supporting defines are now in place
@@ -776,7 +833,7 @@
   *  - All HID demos now pass the USB.org automated HID compliance tests
   *  - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems
   *  - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks
-  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions		
+  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions
   *  - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file
   *  - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
   *    are reflected in the hardware (change was previously lost)
@@ -912,7 +969,7 @@
   *
   *  - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
   *    are reflected in the hardware
-  *  - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the 
+  *  - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the
   *    GetLineCoding request had an incorrect RequestType mask preventing it from being processed
   *  - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full
   *  - Device control endpoint size is now determined from the device's descriptors rather than being fixed
@@ -1019,6 +1076,7 @@
   *  - ID transition interrupt now raises the appropriate device/host disconnect event if device attached
   *  - Fixed double VBUS change (and VBUS -) event when detaching in device mode
   *  - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile
-  *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and 
+  *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and
   *    Endpoint_IsConfigured() after calling the config functions to determine success
   */
+