X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/04774208b6d4131466a2b5e44af314252ab1734e..6a46f0025a4d44ca2c747745f542e8f475dd9b28:/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c

diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c
new file mode 100644
index 000000000..5b156ecda
--- /dev/null
+++ b/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c
@@ -0,0 +1,207 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2009.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, and distribute this software
+  and its documentation for any purpose and without fee is hereby
+  granted, provided that the above copyright notice appear in all
+  copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+ 
+#include "RNDISEthernetHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "RNDIS Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+	for (;;)
+	{
+		RNDIS_Host_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	SerialStream_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_ShutDown();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+	
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+/** Task to set the configuration of the attached device after it has been enumerated, and to read in
+ *  data received from the attached RNDIS device and print it to the serial port.
+ */
+void RNDIS_Host_Task(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Config Data.\r\n"));
+		
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+				
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			RNDIS_Initialize_Complete_t InitMessageResponse;
+			if ((ErrorCode = RNDIS_InitializeDevice(1024, &InitMessageResponse)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Error Initializing Device.\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;			
+			}
+			
+			printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), InitMessageResponse.MaxTransferSize);
+			
+			uint32_t PacketFilter = 0xFFFFFFFF;
+			if ((ErrorCode = RNDIS_SetRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
+			                                        &PacketFilter, sizeof(PacketFilter))) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Error Setting Device Packet Filter.\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
+
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+						
+			break;
+	}
+}