X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/022035839e62c52299b7191f6967ac57ccf1bd94..8ecdc2b1441417bf97661a3d3edd17a5afd707bf:/Projects/AVRISP/Lib/XPROG/TINYNVM.c

diff --git a/Projects/AVRISP/Lib/XPROG/TINYNVM.c b/Projects/AVRISP/Lib/XPROG/TINYNVM.c
deleted file mode 100644
index 3ddd2eda0..000000000
--- a/Projects/AVRISP/Lib/XPROG/TINYNVM.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2009.
-              
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, and distribute this software
-  and its documentation for any purpose and without fee is hereby
-  granted, provided that the above copyright notice appear in all
-  copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Target-related functions for the TINY target's NVM module.
- */
-
-#define  INCLUDE_FROM_TINYNVM_C
-#include "TINYNVM.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-#warning TPI Protocol support is currently incomplete and is not suitable for general use.
-
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
- *
- *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
- */
-bool TINYNVM_WaitWhileNVMBusBusy(void)
-{
-	/* Poll the STATUS register to check to see if NVM access has been enabled */
-	while (TimeoutMSRemaining)
-	{
-		/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
-		XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
-		if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
-		  return true;
-	}
-	
-	return false;
-}
-
-/** Reads memory from the target's memory spaces.
- *
- *  \param[in]  ReadAddress  Start address to read from within the target's address space
- *  \param[out] ReadBuffer   Buffer to store read data into
- *  \param[in]  ReadSize     Number of bytes to read
- *
- *  \return Boolean true if the command sequence complete successfully
- */
-bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
-{
-	// TODO
-	
-	return true;
-}
-
-/** Writes byte addressed memory to the target's memory spaces.
- *
- *  \param[in]  WriteCommand  Command to send to the device to write each memory byte
- *  \param[in]  WriteAddress  Start address to write to within the target's address space
- *  \param[in]  WriteBuffer   Buffer to source data from
- *
- *  \return Boolean true if the command sequence complete successfully
- */
-bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
-{
-	// TODO
-	
-	return true;
-}
-
-/** Erases a specific memory space of the target.
- *
- *  \param[in] EraseCommand  NVM erase command to send to the device
- *  \param[in] Address  Address inside the memory space to erase
- *
- *  \return Boolean true if the command sequence complete successfully
- */
-bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
-{
-	// TODO
-	
-	return true;
-}
-
-#endif