X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/0210fa5648b1ed65caa384f966ac40b4ecc489ae..beb069b9b845da02de07e4e3e0149e84004d2445:/LUFA/ManPages/ChangeLog.txt diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt index 93ccce1a0..6b1fc877f 100644 --- a/LUFA/ManPages/ChangeLog.txt +++ b/LUFA/ManPages/ChangeLog.txt @@ -6,38 +6,95 @@ /** \page Page_ChangeLog Project Changelog * - * \section Sec_ChangeLogXXXXXX Version XXXXXX + * \section Sec_ChangeLog111009 Version 111009 * New: * - Core: * - Added USE_LUFA_CONFIG_HEADER compile time option to include a LUFAConfig.h header in the user director for LUFA configuration * tokens as an alternative to tokens defined in the project makefile * - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting * - Added Audio class control request definitions - * - Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates + * - Added new CALLBACK_Audio_Device_GetSetEndpointProperty() callback to the Audio Device Class driver to allow for endpoint control manipulations + * such as data sample rates + * - Added support for the Audio class GET STATUS request in the Audio Device Class driver so that it is correctly ACKed when sent by the host + * - Added new EVENT_Audio_Device_StreamStartStop() event to the Audio Device Class driver to detect stream start/stop events * - Added board driver support for the Busware TUL board + * - Added board hardware driver support for the EVK1100 board + * - Added board hardware driver support for the EVK1104 board + * - Added new Host mode Audio Class driver + * - Added new SPI_GetCurrentMode() function to the SPI peripheral driver + * - Added RingBuffer_GetFreeCount() function to the Ring Buffer driver + * - Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver + * - Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device + * - Added new USB_Host_GetDeviceStatus() function to the host standard request function set + * - Added AVR USB XMEGA architecture port (currently incomplete/experimental) + * - Added new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros + * - Added new JTAG_DISABLE() macro for the AVR8 architecture + * - Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t * - Library Applications: * - Added RNDIS device mode to the Webserver project - * - Added new MediaControl project * - Added new incomplete AndroidAccessoryHost Host LowLevel demo - * - Added new incomplete AudioInputHost Host LowLevel demo - * - Added new incomplete AudioOutputHost Host LowLevel demo + * - Added new HIDReportViewer project + * - Added new MediaControl project + * - Added new AudioInputHost Host ClassDriver demo + * - Added new AudioOutputHost Host ClassDriver demo + * - Added new AudioInputHost Host LowLevel demo + * - Added new AudioOutputHost Host LowLevel demo + * - Added new "checksource" target to all library project makefiles + * - Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch) * * Changed: * - Core: - * - Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host * - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying * the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or * continuous sample rates + * - Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction + * as part of the endpoint address + * - Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, + * by changing the USB_* prefix to USB_Device_* or USB_Host_* + * - Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required + * - Altered the USB_Host_SetDeviceConfiguration() function to update the global Host state machine state and the new + * USB_Host_ConfigurationNumber global as required + * - Added endian correcting code to the library USB class drivers for multiple architecture support + * - Removed the ENDPOINT_DESCRIPTOR_DIR_* macros, replaced by ENDPOINT_DIR_* instead + * - Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT() + * - Added variable number of axis to HID_DESCRIPTOR_JOYSTICK() for multi-axis joysticks above just X and Y + * - Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, + * and not a Pipe within the host + * - The MS_Host_ResetMSInterface() now performs a full Mass Storage reset sequence to prevent data corruption in the event of a device + * lock up or timeout (thanks to David Lyons) + * - Added endian-correction to the CDC driver's Line Encoding control request handlers. * - Library Applications: - * - Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates + * - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates + * - Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration + * instead of manual host state machine manipulations in the main application task + * - Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines + * - Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair) * * Fixed: * - Core: - * - None + * - Large number of documentation and code comment corrections (thanks to Andrey from Microsin.ru) + * - Fixed possibility of the AVR's SPI interface being pulled out of master mode if the /SS pin is a input and pulled low (thanks + * to Andrey from Microsin.ru) + * - Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time + * option was not enabled on the AVR8s + * - Fixed lack of C++ compatibility in some internal header files causing compile errors when using LUFA in C++ projects + * - Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices + * - Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used + * - Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values + * - Fixed TWI_ReadPacket() not releasing the TWI bus on read completion + * - Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was + * \c NULL (which should be allowable according to the API) + * - Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer + * - Fixed HID Parser's largest report size bit count not including the size of the last parsed report item + * - Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255 * - Library Applications: * - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2 * - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed * - Fixed compile errors in the incomplete BluetoothHost demo application (thanks to Timo Lindfors) + * - Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden) + * - Fixed incorrect logging interval (always 500ms longer than requested) in the TempDataLogger project + * - Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov) + * - Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos * * \section Sec_ChangeLog110528 Version 110528 * New: @@ -122,7 +179,7 @@ * - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.) * - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey) * - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet) - * - Fixed inverted Minimum board LEDs + * - Fixed inverted Minimus board LEDs * - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab) * - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect * error code enum (thanks to Daniel Seibert) @@ -1016,7 +1073,7 @@ * - Library license changed from LGPLv3 to MIT license * * - * \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008 + * \section Sec_ChangeLog151 Version 1.5.1 - Released 7th July, 2008 * * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event * rather than the USB_DeviceAttached event @@ -1095,7 +1152,7 @@ * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names * * - * \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008 + * \section Sec_ChangeLog141 Version 1.4.1 - Released 19 May, 2008 * * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly