X-Git-Url: http://git.linex4red.de/pub/lufa.git/blobdiff_plain/0174d8ea70f3d7180e6ea3da2b3720273adb33d9..bea72a8412f99b294c00341fa16a8308bcc66f15:/LUFA/Drivers/USB/LowLevel/Host.h

diff --git a/LUFA/Drivers/USB/LowLevel/Host.h b/LUFA/Drivers/USB/LowLevel/Host.h
index 8623c4ec6..b11883974 100644
--- a/LUFA/Drivers/USB/LowLevel/Host.h
+++ b/LUFA/Drivers/USB/LowLevel/Host.h
@@ -245,6 +245,39 @@
 			};
 
 		/* Inline Functions: */
+			/** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended)
+			 *  the frame number is incremented by one.
+			 */
+			static inline uint16_t USB_Host_GetFrameNumber(void)
+			{
+				return UHFNUM;
+			}
+			
+			#if !defined(NO_SOF_EVENTS)
+				/** Enables the host mode Start Of Frame events. When enabled, this causes the
+				 *  \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
+				 *  at the start of each USB frame when a device is enumerated while in host mode.
+				 *
+				 *  \note Not available when the NO_SOF_EVENTS compile time token is defined.
+				 */
+				static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
+				static inline void USB_Host_EnableSOFEvents(void)
+				{
+					USB_INT_Enable(USB_INT_HSOFI);
+				}
+					
+				/** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the
+				 *  \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode.
+				 *
+				 *  \note Not available when the NO_SOF_EVENTS compile time token is defined.
+				 */
+				static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
+				static inline void USB_Host_DisableSOFEvents(void)
+				{
+					USB_INT_Disable(USB_INT_HSOFI);
+				}
+			#endif
+			
 			/** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host.
 			 *  USB bus resets leave the default control pipe configured (if already configured).
 			 *
@@ -398,7 +431,7 @@
 			 *
 			 *  \note After this routine returns, the control pipe will be selected.
 			 *
-			 *  \param[in] EndpointIndex  Index of the endpoint to clear.
+			 *  \param[in] EndpointIndex  Index of the endpoint to clear, including the endpoint's direction.
 			 *
 			 *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
 			 */