+/*\r
+ LUFA Library\r
+ Copyright (C) Dean Camera, 2009.\r
+ \r
+ dean [at] fourwalledcubicle [dot] com\r
+ www.fourwalledcubicle.com\r
+*/\r
+\r
+/*\r
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+ Permission to use, copy, modify, distribute, and sell this \r
+ software and its documentation for any purpose is hereby granted\r
+ without fee, provided that the above copyright notice appear in \r
+ all copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting \r
+ documentation, and that the name of the author not be used in \r
+ advertising or publicity pertaining to distribution of the \r
+ software without specific, written prior permission.\r
+\r
+ The author disclaim all warranties with regard to this\r
+ software, including all implied warranties of merchantability\r
+ and fitness. In no event shall the author be liable for any\r
+ special, indirect or consequential damages or any damages\r
+ whatsoever resulting from loss of use, data or profits, whether\r
+ in an action of contract, negligence or other tortious action,\r
+ arising out of or in connection with the use or performance of\r
+ this software.\r
+*/\r
+\r
+/** \file\r
+ *\r
+ * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage\r
+ * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,\r
+ * which wrap around standard SCSI device commands for controlling the actual storage medium.\r
+ */\r
+ \r
+#define INCLUDE_FROM_SCSI_C\r
+#include "SCSI.h"\r
+\r
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's\r
+ * features and capabilities.\r
+ */\r
+SCSI_Inquiry_Response_t InquiryData = \r
+ {\r
+ .DeviceType = DEVICE_TYPE_BLOCK,\r
+ .PeripheralQualifier = 0,\r
+ \r
+ .Removable = true,\r
+ \r
+ .Version = 0,\r
+ \r
+ .ResponseDataFormat = 2,\r
+ .NormACA = false,\r
+ .TrmTsk = false,\r
+ .AERC = false,\r
+\r
+ .AdditionalLength = 0x1F,\r
+ \r
+ .SoftReset = false,\r
+ .CmdQue = false,\r
+ .Linked = false,\r
+ .Sync = false,\r
+ .WideBus16Bit = false,\r
+ .WideBus32Bit = false,\r
+ .RelAddr = false,\r
+ \r
+ .VendorID = "LUFA",\r
+ .ProductID = "Dataflash Disk",\r
+ .RevisionID = {'0','.','0','0'},\r
+ };\r
+\r
+/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE\r
+ * command is issued. This gives information on exactly why the last command failed to complete.\r
+ */\r
+SCSI_Request_Sense_Response_t SenseData =\r
+ {\r
+ .ResponseCode = 0x70,\r
+ .AdditionalLength = 0x0A,\r
+ };\r
+\r
+\r
+/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches\r
+ * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns\r
+ * a command failure due to a ILLEGAL REQUEST.\r
+ *\r
+ * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with\r
+ */\r
+bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* MSInterfaceInfo)\r
+{\r
+ /* Set initial sense data, before the requested command is processed */\r
+ SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,\r
+ SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,\r
+ SCSI_ASENSEQ_NO_QUALIFIER);\r
+ \r
+ /* Run the appropriate SCSI command hander function based on the passed command */\r
+ switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])\r
+ {\r
+ case SCSI_CMD_INQUIRY:\r
+ SCSI_Command_Inquiry(MSInterfaceInfo); \r
+ break;\r
+ case SCSI_CMD_REQUEST_SENSE:\r
+ SCSI_Command_Request_Sense(MSInterfaceInfo);\r
+ break;\r
+ case SCSI_CMD_READ_CAPACITY_10:\r
+ SCSI_Command_Read_Capacity_10(MSInterfaceInfo); \r
+ break;\r
+ case SCSI_CMD_SEND_DIAGNOSTIC:\r
+ SCSI_Command_Send_Diagnostic(MSInterfaceInfo);\r
+ break;\r
+ case SCSI_CMD_WRITE_10:\r
+ SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);\r
+ break;\r
+ case SCSI_CMD_READ_10:\r
+ SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);\r
+ break;\r
+ case SCSI_CMD_TEST_UNIT_READY:\r
+ case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:\r
+ case SCSI_CMD_VERIFY_10:\r
+ /* These commands should just succeed, no handling required */\r
+ MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;\r
+ break;\r
+ default:\r
+ /* Update the SENSE key to reflect the invalid command */\r
+ SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,\r
+ SCSI_ASENSE_INVALID_COMMAND,\r
+ SCSI_ASENSEQ_NO_QUALIFIER);\r
+ break;\r
+ }\r
+\r
+ return (SenseData.SenseKey == SCSI_SENSE_KEY_GOOD);\r
+}\r
+\r
+/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features\r
+ * and capabilities to the host.\r
+ *\r
+ * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with\r
+ */\r
+static void SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* MSInterfaceInfo)\r
+{\r
+ uint16_t AllocationLength = (((uint16_t)MSInterfaceInfo->State.CommandBlock.SCSICommandData[3] << 8) |\r
+ MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]);\r
+ uint16_t BytesTransferred = (AllocationLength < sizeof(InquiryData))? AllocationLength :\r
+ sizeof(InquiryData);\r
+\r
+ /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */\r
+ if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||\r
+ MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])\r
+ {\r
+ /* Optional but unsupported bits set - update the SENSE key and fail the request */\r
+ SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,\r
+ SCSI_ASENSE_INVALID_FIELD_IN_CDB,\r
+ SCSI_ASENSEQ_NO_QUALIFIER);\r
+\r
+ return;\r
+ }\r
+ \r
+ Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK);\r
+\r
+ uint8_t PadBytes[AllocationLength - BytesTransferred];\r
+ \r
+ /* Pad out remaining bytes with 0x00 */\r
+ Endpoint_Write_Stream_LE(&PadBytes, (AllocationLength - BytesTransferred), NO_STREAM_CALLBACK);\r
+\r
+ /* Finalize the stream transfer to send the last packet */\r
+ Endpoint_ClearIN();\r
+\r
+ /* Succeed the command and update the bytes transferred counter */\r
+ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;\r
+}\r
+\r
+/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,\r
+ * including the error code and additional error information so that the host can determine why a command failed to complete.\r
+ *\r
+ * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with\r
+ */\r
+static void SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* MSInterfaceInfo)\r
+{\r
+ uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];\r
+ uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);\r
+ \r
+ uint8_t PadBytes[AllocationLength - BytesTransferred];\r
+\r
+ Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK);\r
+ Endpoint_Write_Stream_LE(&PadBytes, (AllocationLength - BytesTransferred), NO_STREAM_CALLBACK);\r
+ Endpoint_ClearIN();\r
+\r
+ /* Succeed the command and update the bytes transferred counter */\r
+ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;\r
+}\r
+\r
+/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity\r
+ * on the selected Logical Unit (drive), as a number of OS-sized blocks.\r
+ *\r
+ * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with\r
+ */\r
+static void SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* MSInterfaceInfo)\r
+{\r
+ uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1);\r
+ uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE;\r
+\r
+ Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK);\r
+ Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK);\r
+ Endpoint_ClearIN();\r
+ \r
+ /* Succeed the command and update the bytes transferred counter */\r
+ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;\r
+}\r
+\r
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the\r
+ * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is\r
+ * supported.\r
+ *\r
+ * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with\r
+ */\r
+static void SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* MSInterfaceInfo)\r
+{\r
+ /* Check to see if the SELF TEST bit is not set */\r
+ if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))\r
+ {\r
+ /* Only self-test supported - update SENSE key and fail the command */\r
+ SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,\r
+ SCSI_ASENSE_INVALID_FIELD_IN_CDB,\r
+ SCSI_ASENSEQ_NO_QUALIFIER);\r
+\r
+ return;\r
+ }\r
+ \r
+ /* Check to see if all attached Dataflash ICs are functional */\r
+ if (!(DataflashManager_CheckDataflashOperation()))\r
+ {\r
+ /* Update SENSE key with a hardware error condition and return command fail */\r
+ SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,\r
+ SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,\r
+ SCSI_ASENSEQ_NO_QUALIFIER); \r
+ \r
+ return;\r
+ }\r
+ \r
+ /* Succeed the command and update the bytes transferred counter */\r
+ MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;\r
+}\r
+\r
+/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address\r
+ * and total number of blocks to process, then calls the appropriate low-level dataflash routine to handle the actual\r
+ * reading and writing of the data.\r
+ *\r
+ * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with\r
+ * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)\r
+ */\r
+static void SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* MSInterfaceInfo, const bool IsDataRead)\r
+{\r
+ uint32_t BlockAddress;\r
+ uint16_t TotalBlocks;\r
+ \r
+ /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */\r
+ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);\r
+\r
+ /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */\r
+ TotalBlocks = SwapEndian_16(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);\r
+ \r
+ /* Check if the block address is outside the maximum allowable value for the LUN */\r
+ if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS)\r
+ {\r
+ /* Block address is invalid, update SENSE key and return command fail */\r
+ SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,\r
+ SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,\r
+ SCSI_ASENSEQ_NO_QUALIFIER);\r
+\r
+ return;\r
+ }\r
+ \r
+ /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */\r
+ if (IsDataRead == DATA_READ)\r
+ DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);\r
+ else\r
+ DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);\r
+\r
+ /* Update the bytes transferred counter and succeed the command */\r
+ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);\r
+}\r
projects / pub / lufa.git / blobdiff