+++ /dev/null
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations\r
- * needed to communication with an attached USB device. Descriptors are special computer-readable structures\r
- * which the host requests upon device enumeration, to determine the device's capabilities and functions.\r
- */\r
-\r
-#include "ConfigDescriptor.h"\r
-\r
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This\r
- * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate\r
- * with compatible devices.\r
- *\r
- * This routine searches for a SI interface descriptor containing bulk IN and OUT data endpoints.\r
- *\r
- * \return An error code from the StillImageHost_GetConfigDescriptorDataCodes_t enum.\r
- */\r
-uint8_t ProcessConfigurationDescriptor(void)\r
-{\r
- uint8_t* ConfigDescriptorData;\r
- uint16_t ConfigDescriptorSize;\r
- uint8_t FoundEndpoints = 0;\r
- \r
- /* Get Configuration Descriptor size from the device */\r
- if (USB_GetDeviceConfigDescriptor(&ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful)\r
- return ControlError;\r
- \r
- /* Ensure that the Configuration Descriptor isn't too large */\r
- if (ConfigDescriptorSize > MAX_CONFIG_DESCRIPTOR_SIZE)\r
- return DescriptorTooLarge;\r
- \r
- /* Allocate enough memory for the entire config descriptor */\r
- ConfigDescriptorData = alloca(ConfigDescriptorSize);\r
-\r
- /* Retrieve the entire configuration descriptor into the allocated buffer */\r
- USB_GetDeviceConfigDescriptor(&ConfigDescriptorSize, ConfigDescriptorData);\r
- \r
- /* Validate returned data - ensure first entry is a configuration header descriptor */\r
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)\r
- return InvalidConfigDataReturned;\r
- \r
- /* Get the Still Image interface from the configuration descriptor */\r
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,\r
- DComp_NextStillImageInterface) != DESCRIPTOR_SEARCH_COMP_Found)\r
- {\r
- /* Descriptor not found, error out */\r
- return NoInterfaceFound;\r
- }\r
-\r
- /* Get the IN and OUT data and event endpoints for the Still Image interface */\r
- while (FoundEndpoints != ((1 << SIMAGE_EVENTS_PIPE) | (1 << SIMAGE_DATA_IN_PIPE) | (1 << SIMAGE_DATA_OUT_PIPE)))\r
- {\r
- /* Fetch the next endpoint from the current Still Image interface */\r
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,\r
- DComp_NextSImageInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)\r
- {\r
- /* Descriptor not found, error out */\r
- return NoEndpointFound;\r
- }\r
- \r
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);\r
-\r
- /* Check if the found endpoint is a interrupt or bulk type descriptor */\r
- if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)\r
- {\r
- /* If the endpoint is a IN type interrupt endpoint */\r
- if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)\r
- {\r
- /* Configure the events pipe */\r
- Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,\r
- EndpointData->EndpointAddress, EndpointData->EndpointSize,\r
- PIPE_BANK_DOUBLE); \r
-\r
- Pipe_SetInfiniteINRequests();\r
- Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS);\r
- \r
- /* Set the flag indicating that the events pipe has been found */\r
- FoundEndpoints |= (1 << SIMAGE_EVENTS_PIPE);\r
- }\r
- }\r
- else\r
- {\r
- /* Check if the endpoint is a bulk IN or bulk OUT endpoint */\r
- if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)\r
- {\r
- /* Configure the data IN pipe */\r
- Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN,\r
- EndpointData->EndpointAddress, EndpointData->EndpointSize,\r
- PIPE_BANK_DOUBLE);\r
-\r
- Pipe_SetInfiniteINRequests();\r
-\r
- /* Set the flag indicating that the data IN pipe has been found */\r
- FoundEndpoints |= (1 << SIMAGE_DATA_IN_PIPE);\r
- }\r
- else\r
- {\r
- /* Configure the data OUT pipe */\r
- Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT,\r
- EndpointData->EndpointAddress, EndpointData->EndpointSize,\r
- PIPE_BANK_DOUBLE);\r
-\r
- /* Set the flag indicating that the data OUT pipe has been found */\r
- FoundEndpoints |= (1 << SIMAGE_DATA_OUT_PIPE);\r
- }\r
- }\r
- }\r
-\r
- /* Valid data found, return success */\r
- return SuccessfulConfigRead;\r
-}\r
-\r
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's\r
- * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration\r
- * descriptor processing if an incompatible descriptor configuration is found.\r
- *\r
- * This comparator searches for the next Interface descriptor of the correct Still Image Class, Subclass and Protocol values.\r
- *\r
- * \return A value from the DSEARCH_Return_ErrorCodes_t enum\r
- */\r
-uint8_t DComp_NextStillImageInterface(void* CurrentDescriptor)\r
-{\r
- if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)\r
- {\r
- /* Check the descriptor class and protocol, break out if correct class/protocol interface found */\r
- if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == SIMAGE_CLASS) &&\r
- (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == SIMAGE_SUBCLASS) &&\r
- (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == SIMAGE_PROTOCOL))\r
- {\r
- return DESCRIPTOR_SEARCH_Found;\r
- }\r
- }\r
- \r
- return DESCRIPTOR_SEARCH_NotFound;\r
-}\r
-\r
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's\r
- * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration\r
- * descriptor processing if an incompatible descriptor configuration is found.\r
- *\r
- * This comparator searches for the next Interrupt or Bulk Endpoint descriptor of the current SI interface, aborting the\r
- * search if another interface descriptor is found before the next endpoint.\r
- *\r
- * \return A value from the DSEARCH_Return_ErrorCodes_t enum\r
- */\r
-uint8_t DComp_NextSImageInterfaceDataEndpoint(void* CurrentDescriptor)\r
-{\r
- if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)\r
- {\r
- uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,\r
- USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);\r
- \r
- if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT))\r
- return DESCRIPTOR_SEARCH_Found;\r
- }\r
- else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)\r
- {\r
- return DESCRIPTOR_SEARCH_Fail;\r
- }\r
-\r
- return DESCRIPTOR_SEARCH_NotFound;\r
-}\r
projects / pub / lufa.git / blobdiff