Add script reading bootloader flags

[pub/lufa.git] / LUFA / Drivers / Peripheral / XMEGA / SerialSPI_XMEGA.h

diff --git a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
index 79a5719..cb86a99 100644 (file)
--- a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2012.
+     Copyright (C) Dean Camera, 2021.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2021  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -40,30 +40,30 @@
 /** \ingroup Group_SerialSPI
  *  \defgroup Group_SerialSPI_XMEGA Master SPI Mode Serial USART Peripheral Driver (XMEGA)
  *
 /** \ingroup Group_SerialSPI
  *  \defgroup Group_SerialSPI_XMEGA Master SPI Mode Serial USART Peripheral Driver (XMEGA)
  *

- *  \section Sec_ModDescription Module Description
+ *  \section Sec_SerialSPI_XMEGA_ModDescription Module Description

  *  On-chip serial USART driver for the XMEGA AVR microcontrollers.
  *
  *  \note This file should not be included directly. It is automatically included as needed by the ADC driver
  *        dispatch header located in LUFA/Drivers/Peripheral/SerialSPI.h.
  *
  *  On-chip serial USART driver for the XMEGA AVR microcontrollers.
  *
  *  \note This file should not be included directly. It is automatically included as needed by the ADC driver
  *        dispatch header located in LUFA/Drivers/Peripheral/SerialSPI.h.
  *

- *  \section Sec_ExampleUsage Example Usage
+ *  \section Sec_SerialSPI_XMEGA_ExampleUsage Example Usage

  *  The following snippet is an example of how this module may be used within a typical
  *  application.
  *
  *  \code
  *      // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
  *      SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000);
  *  The following snippet is an example of how this module may be used within a typical
  *  application.
  *
  *  \code
  *      // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
  *      SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000);

- *      
+ *

  *      // Send several bytes, ignoring the returned data
  *      SerialSPI_SendByte(&USARTD0, 0x01);
  *      SerialSPI_SendByte(&USARTD0, 0x02);
  *      SerialSPI_SendByte(&USARTD0, 0x03);
  *      // Send several bytes, ignoring the returned data
  *      SerialSPI_SendByte(&USARTD0, 0x01);
  *      SerialSPI_SendByte(&USARTD0, 0x02);
  *      SerialSPI_SendByte(&USARTD0, 0x03);

- *      
+ *

  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SerialSPI_ReceiveByte(&USARTD);
  *      uint8_t Byte2 = SerialSPI_ReceiveByte(&USARTD);
  *      uint8_t Byte3 = SerialSPI_ReceiveByte(&USARTD);
  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SerialSPI_ReceiveByte(&USARTD);
  *      uint8_t Byte2 = SerialSPI_ReceiveByte(&USARTD);
  *      uint8_t Byte3 = SerialSPI_ReceiveByte(&USARTD);

- *      
+ *

  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SerialSPI_TransferByte(&USARTD0, 0xDC);
  *  \endcode
  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SerialSPI_TransferByte(&USARTD0, 0xDC);
  *  \endcode


@@ -97,31 +97,31 @@
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */
        /* Public Interface - May be used in end-application: */
                /* Macros: */
                        /** \name SPI SCK Polarity Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI clock polarity mask for \ref SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define USART_SPI_SCK_LEAD_RISING      0
                        /** SPI clock polarity mask for \ref SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
                        #define USART_SPI_SCK_LEAD_RISING      0

-                       //@}
+                       /**@}*/

 
                        /** \name SPI Sample Edge Configuration Masks */
 
                        /** \name SPI Sample Edge Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define USART_SPI_SAMPLE_LEADING       0
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
                        #define USART_SPI_SAMPLE_LEADING       0
 
                        /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */

-                       #define USART_SPI_SAMPLE_TRAILING      USART_UPCHA_bm
-                       //@}
+                       #define USART_SPI_SAMPLE_TRAILING      (1 << 1)
+                       /**@}*/

 
                        /** \name SPI Data Ordering Configuration Masks */
 
                        /** \name SPI Data Ordering Configuration Masks */

-                       //@{
+                       /**@{*/

                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define USART_SPI_ORDER_MSB_FIRST      0
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
                        #define USART_SPI_ORDER_MSB_FIRST      0
 
                        /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */

-                       #define USART_SPI_ORDER_LSB_FIRST      USART_UDORD_bm
-                       //@}                    
+                       #define USART_SPI_ORDER_LSB_FIRST      (1 << 2)
+                       /**@}*/

 
                /* Inline Functions: */
 
                /* Inline Functions: */

-                       /** Initialize the USART module in Master SPI mode. 
+                       /** Initialize the USART module in Master SPI mode.

                         *
                         *  \param[in,out] USART        Pointer to the base of the USART peripheral within the device.
                         *  \param[in]     SPIOptions   USART SPI Options, a mask consisting of one of each of the \c USART_SPI_SCK_*,
                         *
                         *  \param[in,out] USART        Pointer to the base of the USART peripheral within the device.
                         *  \param[in]     SPIOptions   USART SPI Options, a mask consisting of one of each of the \c USART_SPI_SCK_*,


@@ -130,28 +130,32 @@
                         */
                        static inline void SerialSPI_Init(USART_t* const USART,
                                                          const uint8_t SPIOptions,
                         */
                        static inline void SerialSPI_Init(USART_t* const USART,
                                                          const uint8_t SPIOptions,

+                                                         const uint32_t BaudRate) ATTR_NON_NULL_PTR_ARG(1);
+                       static inline void SerialSPI_Init(USART_t* const USART,
+                                                         const uint8_t SPIOptions,

                                                          const uint32_t BaudRate)
                        {
                                uint16_t BaudValue = SERIAL_SPI_UBBRVAL(BaudRate);
                                                          const uint32_t BaudRate)
                        {
                                uint16_t BaudValue = SERIAL_SPI_UBBRVAL(BaudRate);

-                       
+

                                USART->BAUDCTRLB = (BaudValue >> 8);
                                USART->BAUDCTRLA = (BaudValue & 0xFF);
                                USART->BAUDCTRLB = (BaudValue >> 8);
                                USART->BAUDCTRLA = (BaudValue & 0xFF);

-                       
+

                                USART->CTRLC = (USART_CMODE_MSPI_gc | SPIOptions);
                                USART->CTRLB = (USART_RXEN_bm | USART_TXEN_bm);
                        }
                                USART->CTRLC = (USART_CMODE_MSPI_gc | SPIOptions);
                                USART->CTRLB = (USART_RXEN_bm | USART_TXEN_bm);
                        }

-                       
+

                        /** Turns off the USART driver, disabling and returning used hardware to their default configuration.
                         *
                         *  \param[in,out] USART  Pointer to the base of the USART peripheral within the device.
                         */
                        /** Turns off the USART driver, disabling and returning used hardware to their default configuration.
                         *
                         *  \param[in,out] USART  Pointer to the base of the USART peripheral within the device.
                         */

+                       static inline void SerialSPI_Disable(USART_t* const USART) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);

                        static inline void SerialSPI_Disable(USART_t* const USART)
                        {
                                USART->CTRLA = 0;
                                USART->CTRLB = 0;
                                USART->CTRLC = 0;
                        }
                        static inline void SerialSPI_Disable(USART_t* const USART)
                        {
                                USART->CTRLA = 0;
                                USART->CTRLB = 0;
                                USART->CTRLC = 0;
                        }

-                       
+

                        /** Sends and receives a byte through the USART SPI interface, blocking until the transfer is complete.
                         *
                         *  \param[in,out] USART     Pointer to the base of the USART peripheral within the device.
                        /** Sends and receives a byte through the USART SPI interface, blocking until the transfer is complete.
                         *
                         *  \param[in,out] USART     Pointer to the base of the USART peripheral within the device.


@@ -160,6 +164,8 @@
                         *  \return Response byte from the attached SPI device.
                         */
                        static inline uint8_t SerialSPI_TransferByte(USART_t* const USART,
                         *  \return Response byte from the attached SPI device.
                         */
                        static inline uint8_t SerialSPI_TransferByte(USART_t* const USART,

+                                                                    const uint8_t DataByte) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
+                       static inline uint8_t SerialSPI_TransferByte(USART_t* const USART,

                                                                     const uint8_t DataByte)
                        {
                                USART->DATA   = DataByte;
                                                                     const uint8_t DataByte)
                        {
                                USART->DATA   = DataByte;


@@ -175,6 +181,8 @@
                         *  \param[in]     DataByte  Byte to send through the USART SPI interface.
                         */
                        static inline void SerialSPI_SendByte(USART_t* const USART,
                         *  \param[in]     DataByte  Byte to send through the USART SPI interface.
                         */
                        static inline void SerialSPI_SendByte(USART_t* const USART,

+                                                             const uint8_t DataByte) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
+                       static inline void SerialSPI_SendByte(USART_t* const USART,

                                                              const uint8_t DataByte)
                        {
                                SerialSPI_TransferByte(USART, DataByte);
                                                              const uint8_t DataByte)
                        {
                                SerialSPI_TransferByte(USART, DataByte);


@@ -187,11 +195,12 @@
                         *
                         *  \return The response byte from the attached SPI device.
                         */
                         *
                         *  \return The response byte from the attached SPI device.
                         */

+                       static inline uint8_t SerialSPI_ReceiveByte(USART_t* const USART) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);

                        static inline uint8_t SerialSPI_ReceiveByte(USART_t* const USART)
                        {
                                return SerialSPI_TransferByte(USART, 0);
                        }
                        static inline uint8_t SerialSPI_ReceiveByte(USART_t* const USART)
                        {
                                return SerialSPI_TransferByte(USART, 0);
                        }

-                       
+

        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
                        }
        /* Disable C linkage for C++ Compilers: */
                #if defined(__cplusplus)
                        }