Fixed Mouse and Keyboard device demos not acting in accordance with the HID specifica...

[pub/lufa.git] / LUFA / Drivers / USB / LowLevel / Pipe.h

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index 7e81cf6..d5c2094 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -158,34 +158,6 @@
                         */\r
                        #define PIPE_EPSIZE_MASK                0x7FF\r
 \r
-                       /** Interrupt definition for the pipe IN interrupt (for INTERRUPT type pipes). Should be used with\r
-                        *  the USB_INT_* macros located in USBInterrupt.h.\r
-                        *\r
-                        *  This interrupt will fire if enabled on an INTERRUPT type pipe if the pipe interrupt period has\r
-                        *  elapsed and the pipe is ready for the next packet from the attached device to be read out from its\r
-                        *  FIFO buffer (if received).\r
-                        *\r
-                        *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe\r
-                        *        is selected), and will fire the common pipe interrupt vector.\r
-                        *\r
-                        *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
-                        */\r
-                       #define PIPE_INT_IN                     UPIENX, (1 << RXINE) , UPINTX, (1 << RXINI)\r
-\r
-                       /** Interrupt definition for the pipe OUT interrupt (for INTERRUPT type pipes). Should be used with\r
-                        *  the USB_INT_* macros located in USBInterrupt.h.\r
-                        *\r
-                        *  This interrupt will fire if enabled on an INTERRUPT type endpoint if a the pipe interrupt period\r
-                        *  has elapsed and the pipe is ready for a packet to be written to the pipe's FIFO buffer and sent\r
-                        *  to the attached device (if required).\r
-                        *  \r
-                        *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe\r
-                        *        is selected), and will fire the common pipe interrupt vector.\r
-                        *\r
-                        *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
-                        */\r
-                       #define PIPE_INT_OUT                   UPIENX, (1 << TXOUTE), UPINTX, (1 << TXOUTI)\r
-\r
                        /** Interrupt definition for the pipe SETUP bank ready interrupt (for CONTROL type pipes). Should be\r
                         *  used with the USB_INT_* macros located in USBInterrupt.h.\r
                         *\r
@@ -337,12 +309,6 @@
                                 */\r
                                static inline uint8_t Pipe_GetPipeInterrupts(void);\r
                                \r
-                               /** Clears the interrupt flag for the specified pipe number.\r
-                                *\r
-                                *  \param PipeNumber  Index of the pipe whose interrupt flag is to be cleared\r
-                                */\r
-                               static inline void Pipe_ClearPipeInterrupt(uint8_t PipeNumber);\r
-                               \r
                                /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type\r
                                 *  pipes).\r
                                 *\r
@@ -504,8 +470,6 @@
 \r
                                #define Pipe_GetPipeInterrupts()       UPINT\r
 \r
-                               #define Pipe_ClearPipeInterrupt(n)     MACROS{ UPINT &= ~(1 << n); }MACROE\r
-\r
                                #define Pipe_HasPipeInterrupted(n)     ((UPINT & (1 << n)) ? true : false)\r
 \r
                                #define Pipe_Unfreeze()                MACROS{ UPCONX &= ~(1 << PFREEZE); }MACROE\r