Add libusb GenericHID Python test script.

[pub/lufa.git] / Demos / Device / ClassDriver / GenericHID / HostTestApp / test_generic_hid.py

diff --git a/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid.py b/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid.py
deleted file mode 100644 (file)
index 4918055..0000000
--- a/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid.py
+++ /dev/null
@@ -1,96 +0,0 @@
-"""
-             LUFA Library
-     Copyright (C) Dean Camera, 2013.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-"""
-
-"""
-    LUFA Generic HID device demo host test script. This script will send a
-    continuous stream of generic reports to the device, to show a variable LED
-    pattern on the target board. Send and received report data is printed to
-    the terminal.
-
-    Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/).
-"""
-
-import sys
-from time import sleep
-import pywinusb.hid as hid
-
-# Generic HID device VID, PID and report payload length (length is increased
-# by one to account for the Report ID byte that must be pre-pended)
-device_vid = 0x03EB
-device_pid = 0x204F
-report_length = 1 + 8
-
-
-def get_hid_device_handle():
-    hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid,
-                                            product_id=device_pid)
-
-    valid_hid_devices = hid_device_filter.get_devices()
-
-    if len(valid_hid_devices) is 0:
-        return None
-    else:
-        return valid_hid_devices[0]
-
-
-def send_led_pattern(device, led1, led2, led3, led4):
-    # Report data for the demo is the report ID (always zero) followed by the
-    # LED on/off data
-    report_data = [0, led1, led2, led3, led4]
-
-    # Zero-extend the array to the length the report should be
-    report_data.extend([0] * (report_length - len(report_data)))
-
-    # Send the generated report to the device
-    device.send_output_report(report_data)
-
-    print("Sent LED Pattern: {0}".format(report_data[1:5]))
-
-
-def received_led_pattern(report_data):
-    print("Received LED Pattern: {0}".format(report_data[1:5]))
-
-
-def main():
-    hid_device = get_hid_device_handle()
-
-    if hid_device is None:
-        print("No valid HID device found.")
-        sys.exit(1)
-
-    try:
-        hid_device.open()
-
-        print("Connected to device 0x%04X/0x%04X - %s [%s]" %
-              (hid_device.vendor_id, hid_device.product_id,
-               hid_device.product_name, hid_device.vendor_name))
-
-        # Set up the HID input report handler to receive reports
-        hid_device.set_raw_data_handler(received_led_pattern)
-
-        p = 0
-        while (hid_device.is_plugged()):
-            # Convert the current pattern index to a bit-mask and send
-            send_led_pattern(hid_device,
-                             (p >> 3) & 1,
-                             (p >> 2) & 1,
-                             (p >> 1) & 1,
-                             (p >> 0) & 1)
-
-            # Compute next LED pattern in sequence
-            p = (p + 1) % 16
-
-            # Delay a bit for visual effect
-            sleep(.2)
-
-    finally:
-        hid_device.close()
-
-
-if __name__ == '__main__':
-    main()