-/** \file\r
- *\r
- * This file contains special DoxyGen information for the generation of the main page and other special\r
- * documentation pages. It is not a project source file.\r
- */\r
- \r
-/** \mainpage Combined Mass Storage and Keyboard Device Demo\r
- *\r
- * \section SSec_Compat Demo Compatibility:\r
- *\r
- * The following list indicates what microcontrollers are compatible with this demo.\r
- *\r
- * - Series 7 USB AVRs\r
- * - Series 6 USB AVRs\r
- * - Series 4 USB AVRs\r
- * - Series 2 USB AVRs\r
- *\r
- * \section SSec_Info USB Information:\r
- *\r
- * The following table gives a rundown of the USB utilization of this demo.\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><b>USB Mode:</b></td>\r
- * <td>Device</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>USB Classes:</b></td>\r
- * <td>Mass Storage Device \n\r
- * Human Interface Device</td>\r
- * </tr>\r
- * <tr> \r
- * <td><b>USB Subclasses:</b></td>\r
- * <td>Bulk-Only Transport \n\r
- * Keyboard Subclass</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>Relevant Standards:</b></td>\r
- * <td>USBIF Mass Storage Standard \n\r
- * USB Bulk-Only Transport Standard \n\r
- * SCSI Primary Commands Specification \n\r
- * SCSI Block Commands Specification \n\r
- * USBIF HID Specification \n\r
- * USBIF HID Usage Tables</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>Usable Speeds:</b></td>\r
- * <td>Full Speed Mode</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section SSec_Description Project Description: \r
- *\r
- * Combined Mass Storage and Keyboard demonstration application. This gives a\r
- * simple reference application for implementing a dual class USB Mass Storage\r
- * and USB HID Keyboard device using the basic USB UFI and HID drivers in all\r
- * modern OSes (i.e. no special drivers required).\r
- * \r
- * On start-up the system will automatically enumerate and function as an\r
- * external mass storage device (which may be formatted and used in the same\r
- * manner as commercial USB Mass Storage devices) and a USB keyboard.\r
- * \r
- * You will need to format the mass storage drive upon first run of this\r
- * demonstration - as the device acts only as a data block transport between\r
- * the host and the storage media, it does not matter what file system is used,\r
- * as the data interpretation is performed by the host and not the USB device.\r
- *\r
- * Keys on the USB keyboard can be pressed by moving the board's Joystick.\r
- * \r
- * The USB control endpoint is managed entirely by the library using endpoint\r
- * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for\r
- * the host to reset the Mass Storage device state during long transfers without\r
- * the need for complicated polling logic.\r
- *\r
- * \section SSec_Options Project Options\r
- *\r
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><b>Define Name:</b></td>\r
- * <td><b>Location:</b></td>\r
- * <td><b>Description:</b></td>\r
- * </tr>\r
- * <tr>\r
- * <td>TOTAL_LUNS</td>\r
- * <td>MassStorage.h</td>\r
- * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive\r
- * - this can be set to any positive non-zero amount.</td>\r
- * </tr>\r
- * </table>\r
- */\r
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Combined Mass Storage and Keyboard Device Demo
+ *
+ * \section SSec_Compat Demo Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this demo.
+ *
+ * - Series 7 USB AVRs
+ * - Series 6 USB AVRs
+ * - Series 4 USB AVRs
+ * - Series 2 USB AVRs
+ *
+ * \section SSec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Classes:</b></td>
+ * <td>Mass Storage Device \n
+ * Human Interface Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclasses:</b></td>
+ * <td>Bulk-Only Transport \n
+ * Keyboard Subclass</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF Mass Storage Standard \n
+ * USB Bulk-Only Transport Standard \n
+ * SCSI Primary Commands Specification \n
+ * SCSI Block Commands Specification \n
+ * USBIF HID Specification \n
+ * USBIF HID Usage Tables</td>
+ * </tr>
+ * <tr>
+ * <td><b>Usable Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_Description Project Description:
+ *
+ * Combined Mass Storage and Keyboard demonstration application. This gives a
+ * simple reference application for implementing a dual class USB Mass Storage
+ * and USB HID Keyboard device using the basic USB UFI and HID drivers in all
+ * modern OSes (i.e. no special drivers required).
+ *
+ * On start-up the system will automatically enumerate and function as an
+ * external mass storage device (which may be formatted and used in the same
+ * manner as commercial USB Mass Storage devices) and a USB keyboard.
+ *
+ * You will need to format the mass storage drive upon first run of this
+ * demonstration - as the device acts only as a data block transport between
+ * the host and the storage media, it does not matter what file system is used,
+ * as the data interpretation is performed by the host and not the USB device.
+ *
+ * Keys on the USB keyboard can be pressed by moving the board's Joystick.
+ *
+ * The USB control endpoint is managed entirely by the library using endpoint
+ * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
+ * the host to reset the Mass Storage device state during long transfers without
+ * the need for complicated polling logic.
+ *
+ * \section SSec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td><b>Define Name:</b></td>
+ * <td><b>Location:</b></td>
+ * <td><b>Description:</b></td>
+ * </tr>
+ * <tr>
+ * <td>TOTAL_LUNS</td>
+ * <td>MassStorage.h</td>
+ * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
+ * - this can be set to any positive non-zero amount.</td>
+ * </tr>
+ * </table>
+ */
projects / pub / lufa.git / blobdiff