Add svn:eol-style property to source files, so that the line endings are correctly...

[pub/lufa.git] / Bootloaders / TeensyHID / TeensyHID.txt

diff --git a/Bootloaders/TeensyHID/TeensyHID.txt b/Bootloaders/TeensyHID/TeensyHID.txt
index 1034c1c..adc5412 100644 (file)
--- a/Bootloaders/TeensyHID/TeensyHID.txt
+++ b/Bootloaders/TeensyHID/TeensyHID.txt
@@ -1,72 +1,72 @@
-/** \file\r
- *\r
- *  This file contains special DoxyGen information for the generation of the main page and other special\r
- *  documentation pages. It is not a project source file.\r
- */\r
- \r
-/** \mainpage Teensy HID Class USB AVR Bootloader\r
- *\r
- *  \section SSec_Compat Demo Compatibility:\r
- *\r
- *  The following list indicates what microcontrollers are compatible with this demo.\r
- *\r
- *  - AT90USB162 (Teensy 1.0)\r
- *  - AT90USB646 (Teensy++ 1.0)\r
- *  - ATMEGA32U4 (Teensy 2.0)\r
- *  - AT90USB1286 (Teensy++ 2.0)\r
- *\r
- *  \section SSec_Info USB Information:\r
- *\r
- *  The following table gives a rundown of the USB utilization of this demo.\r
- *\r
- * <table>\r
- *  <tr>\r
- *   <td><b>USB Mode:</b></td>\r
- *   <td>Device</td>\r
- *  </tr>\r
- *  <tr>\r
- *   <td><b>USB Class:</b></td>\r
- *   <td>Human Interface Device Class (HID)</td>\r
- *  </tr>\r
- *  <tr> \r
- *   <td><b>USB Subclass:</b></td>\r
- *   <td>N/A</td>\r
- *  </tr>\r
- *  <tr>\r
- *   <td><b>Relevant Standards:</b></td>\r
- *   <td>USBIF HID Class Standard \n\r
- *       Teensy Programming Protocol Specification</td>\r
- *  </tr>\r
- *  <tr>\r
- *   <td><b>Usable Speeds:</b></td>\r
- *   <td>Low Speed Mode \n\r
- *       Full Speed Mode</td>\r
- *  </tr>\r
- * </table>\r
- *\r
- *  \section SSec_Description Project Description: \r
- *\r
- * This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming\r
- * software to load firmware onto the AVR, such as the official software at <a>http://www.pjrc.com/teensy/</a>.\r
- *  \r
- * Out of the box this bootloader builds for the ATMEGA32U4, and will fit into 2-4KB of bootloader space. For other\r
- * devices, the makefile will need to be updated to reflect the altered MCU model and bootloader start address. When\r
- * calculating the bootloader start address, use (TARGET_FLASH_SIZE_BYTES - 4096) for targets where the bootloader\r
- * compiles larger than 2KB, or (TARGET_FLASH_SIZE_BYTES - 2048) for smaller targets where the bootloader compiles\r
- * under 2KB.\r
- *\r
- * This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains\r
- * compatible with no changes.\r
- *\r
- *  \section SSec_Options Project Options\r
- *\r
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
- *\r
- *  <table>\r
- *   <tr>\r
- *    <td>\r
- *     None\r
- *    </td>\r
- *   </tr>\r
- *  </table>\r
- */\r
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \mainpage Teensy HID Class USB AVR Bootloader
+ *
+ *  \section SSec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - AT90USB162 (Teensy 1.0)
+ *  - AT90USB646 (Teensy++ 1.0)
+ *  - ATMEGA32U4 (Teensy 2.0)
+ *  - AT90USB1286 (Teensy++ 2.0)
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ *  <tr>
+ *   <td><b>USB Mode:</b></td>
+ *   <td>Device</td>
+ *  </tr>
+ *  <tr>
+ *   <td><b>USB Class:</b></td>
+ *   <td>Human Interface Device Class (HID)</td>
+ *  </tr>
+ *  <tr> 
+ *   <td><b>USB Subclass:</b></td>
+ *   <td>N/A</td>
+ *  </tr>
+ *  <tr>
+ *   <td><b>Relevant Standards:</b></td>
+ *   <td>USBIF HID Class Standard \n
+ *       Teensy Programming Protocol Specification</td>
+ *  </tr>
+ *  <tr>
+ *   <td><b>Usable Speeds:</b></td>
+ *   <td>Low Speed Mode \n
+ *       Full Speed Mode</td>
+ *  </tr>
+ * </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ * This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming
+ * software to load firmware onto the AVR, such as the official software at <a>http://www.pjrc.com/teensy/</a>.
+ *  
+ * Out of the box this bootloader builds for the ATMEGA32U4, and will fit into 2-4KB of bootloader space. For other
+ * devices, the makefile will need to be updated to reflect the altered MCU model and bootloader start address. When
+ * calculating the bootloader start address, use (TARGET_FLASH_SIZE_BYTES - 4096) for targets where the bootloader
+ * compiles larger than 2KB, or (TARGET_FLASH_SIZE_BYTES - 2048) for smaller targets where the bootloader compiles
+ * under 2KB.
+ *
+ * This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains
+ * compatible with no changes.
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */