Fix incorrect Event call name in USBInterrupt.c.

[pub/lufa.git] / Demos / Device / LowLevel / CDC / CDC.c

diff --git a/Demos/Device/LowLevel/CDC/CDC.c b/Demos/Device/LowLevel/CDC/CDC.c
index e63257d..9ee744e 100644 (file)
--- a/Demos/Device/LowLevel/CDC/CDC.c
+++ b/Demos/Device/LowLevel/CDC/CDC.c
@@ -45,20 +45,23 @@
  *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical\r
  *  serial link characteristics and instead sends and receives data in endpoint streams.\r
  */\r
-CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,\r
-                                 .CharFormat  = OneStopBit,\r
-                                 .ParityType  = Parity_None,\r
-                                 .DataBits    = 8            };\r
+CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,\r
+                                   .CharFormat  = OneStopBit,\r
+                                   .ParityType  = Parity_None,\r
+                                   .DataBits    = 8            };\r
 \r
 #if 0\r
 /* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in\r
  *       <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).\r
  */\r
        \r
-static int CDC_putchar (char c, FILE *stream)\r
+static int CDC_putchar(char c, FILE *stream)\r
 {        \r
        Endpoint_SelectEndpoint(CDC_TX_EPNUM);\r
 \r
+       if (!(LineEncoding.BaudRateBPS))\r
+         return -1;\r
+       \r
        while (!(Endpoint_IsReadWriteAllowed()))\r
        {\r
                if (USB_DeviceState != DEVICE_STATE_Configured)\r
@@ -71,10 +74,13 @@ static int CDC_putchar (char c, FILE *stream)
        return 0;\r
 }\r
 \r
-static int CDC_getchar (FILE *stream)\r
+static int CDC_getchar(FILE *stream)\r
 {\r
        int c;\r
-         \r
+\r
+       if (!(LineEncoding.BaudRateBPS))\r
+         return -1;\r
+\r
        Endpoint_SelectEndpoint(CDC_RX_EPNUM);\r
        \r
        for (;;)\r
@@ -137,7 +143,7 @@ void SetupHardware(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
-void EVENT_USB_Connect(void)\r
+void EVENT_USB_Device_Connect(void)\r
 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
@@ -146,7 +152,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops the USB management and CDC management tasks.\r
  */\r
-void EVENT_USB_Disconnect(void)\r
+void EVENT_USB_Device_Disconnect(void)\r
 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
@@ -155,7 +161,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.\r
  */\r
-void EVENT_USB_ConfigurationChanged(void)\r
+void EVENT_USB_Device_ConfigurationChanged(void)\r
 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
@@ -181,16 +187,17 @@ void EVENT_USB_ConfigurationChanged(void)
        {\r
                LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        }\r
+       \r
+       /* Reset line encoding baud rate so that the host knows to send new values */\r
+       LineEncoding.BaudRateBPS = 0;\r
 }\r
 \r
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r
  *  control requests that are not handled internally by the USB library (including the CDC control commands,\r
  *  which are all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r
-void EVENT_USB_UnhandledControlPacket(void)\r
+void EVENT_USB_Device_UnhandledControlRequest(void)\r
 {\r
-       uint8_t* LineCodingData = (uint8_t*)&LineCoding;\r
-\r
        /* Process CDC specific control requests */\r
        switch (USB_ControlRequest.bRequest)\r
        {\r
@@ -201,7 +208,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                Endpoint_ClearSETUP();\r
 \r
                                /* Write the line coding data to the control endpoint */\r
-                               Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));\r
+                               Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));\r
                                \r
                                /* Finalize the stream transfer to send the last packet or clear the host abort */\r
                                Endpoint_ClearOUT();\r
@@ -215,7 +222,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                Endpoint_ClearSETUP();\r
 \r
                                /* Read the line coding data in from the host into the global struct */\r
-                               Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));\r
+                               Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));\r
 \r
                                /* Finalize the stream transfer to clear the last packet from the host */\r
                                Endpoint_ClearIN();\r
@@ -299,7 +306,7 @@ void CDC_Task(void)
        {\r
                ActionSent = false;\r
        }\r
-       else if (ActionSent == false)\r
+       else if ((ActionSent == false) && LineEncoding.BaudRateBPS)\r
        {\r
                ActionSent = true;\r
 \r