-/*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module configuration file R0.08 (C)ChaN, 2010
-/----------------------------------------------------------------------------/
-/
-/ CAUTION! Do not forget to make clean the project after any changes to
-/ the configuration options.
-/
-/----------------------------------------------------------------------------*/
-#ifndef _FFCONF
-#define _FFCONF 8085 /* Revision ID */
-
-
-/*---------------------------------------------------------------------------/
-/ Function and Buffer Configurations
-/----------------------------------------------------------------------------*/
-
-#define _FS_TINY 1 /* 0:Normal or 1:Tiny */
-/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
-/ object instead of the sector buffer in the individual file object for file
-/ data transfer. This reduces memory consumption 512 bytes each file object. */
-
-
-#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */
-/* Setting _FS_READONLY to 1 defines read only configuration. This removes
-/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
-/ f_truncate and useless f_getfree. */
-
-
-#define _FS_MINIMIZE 2 /* 0, 1, 2 or 3 */
-/* The _FS_MINIMIZE option defines minimization level to remove some functions.
-/
-/ 0: Full function.
-/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
-/ are removed.
-/ 2: f_opendir and f_readdir are removed in addition to level 1.
-/ 3: f_lseek is removed in addition to level 2. */
-
-
-#define _USE_STRFUNC 0 /* 0:Disable or 1/2:Enable */
-/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
-
-
-#define _USE_MKFS 0 /* 0:Disable or 1:Enable */
-/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
-
-
-#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */
-/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
-
-
-#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */
-/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/----------------------------------------------------------------------------*/
-
-#define _CODE_PAGE 932
-/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
-/ Incorrect setting of the code page can cause a file open failure.
-/
-/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows)
-/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
-/ 949 - Korean (DBCS, OEM, Windows)
-/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/ 1250 - Central Europe (Windows)
-/ 1251 - Cyrillic (Windows)
-/ 1252 - Latin 1 (Windows)
-/ 1253 - Greek (Windows)
-/ 1254 - Turkish (Windows)
-/ 1255 - Hebrew (Windows)
-/ 1256 - Arabic (Windows)
-/ 1257 - Baltic (Windows)
-/ 1258 - Vietnam (OEM, Windows)
-/ 437 - U.S. (OEM)
-/ 720 - Arabic (OEM)
-/ 737 - Greek (OEM)
-/ 775 - Baltic (OEM)
-/ 850 - Multilingual Latin 1 (OEM)
-/ 858 - Multilingual Latin 1 + Euro (OEM)
-/ 852 - Latin 2 (OEM)
-/ 855 - Cyrillic (OEM)
-/ 866 - Russian (OEM)
-/ 857 - Turkish (OEM)
-/ 862 - Hebrew (OEM)
-/ 874 - Thai (OEM, Windows)
-/ 1 - ASCII only (Valid for non LFN cfg.)
-*/
-
-
-#define _USE_LFN 0 /* 0 to 3 */
-#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */
-/* The _USE_LFN option switches the LFN support.
-/
-/ 0: Disable LFN. _MAX_LFN and _LFN_UNICODE have no effect.
-/ 1: Enable LFN with static working buffer on the bss. NOT REENTRANT.
-/ 2: Enable LFN with dynamic working buffer on the STACK.
-/ 3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When enable LFN,
-/ Unicode handling functions ff_convert() and ff_wtoupper() must be added
-/ to the project. When enable to use heap, memory control functions
-/ ff_memalloc() and ff_memfree() must be added to the project. */
-
-
-#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */
-/* To switch the character code set on FatFs API to Unicode,
-/ enable LFN feature and set _LFN_UNICODE to 1. */
-
-
-#define _FS_RPATH 0 /* 0:Disable or 1:Enable */
-/* When _FS_RPATH is set to 1, relative path feature is enabled and f_chdir,
-/ f_chdrive function are available.
-/ Note that output of the f_readdir fnction is affected by this option. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Physical Drive Configurations
-/----------------------------------------------------------------------------*/
-
-#define _DRIVES 1
-/* Number of volumes (logical drives) to be used. */
-
-
-#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */
-/* Maximum sector size to be handled.
-/ Always set 512 for memory card and hard disk but a larger value may be
-/ required for floppy disk (512/1024) and optical disk (512/2048).
-/ When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implememted
-/ to the disk_ioctl function. */
-
-
-#define _MULTI_PARTITION 0 /* 0:Single parition or 1:Multiple partition */
-/* When _MULTI_PARTITION is set to 0, each volume is bound to the same physical
-/ drive number and can mount only first primaly partition. When it is set to 1,
-/ each volume is tied to the partitions listed in Drives[]. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/----------------------------------------------------------------------------*/
-
-#define _WORD_ACCESS 1 /* 0 or 1 */
-/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
-/ option defines which access method is used to the word data on the FAT volume.
-/
-/ 0: Byte-by-byte access.
-/ 1: Word access. Do not choose this unless following condition is met.
-/
-/ When the byte order on the memory is big-endian or address miss-aligned word
-/ access results incorrect behavior, the _WORD_ACCESS must be set to 0.
-/ If it is not the case, the value can also be set to 1 to improve the
-/ performance and code size. */
-
-
-#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */
-#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */
-#define _SYNC_t HANDLE /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
-/* Include a header file here to define O/S system calls */
-/* #include <windows.h>, <ucos_ii.h.h>, <semphr.h> or ohters. */
-
-/* The _FS_REENTRANT option switches the reentrancy of the FatFs module.
-/
-/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
-/ 1: Enable reentrancy. Also user provided synchronization handlers,
-/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
-/ function must be added to the project. */
-
-
-#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */
-/* To enable file shareing feature, set _FS_SHARE to >= 1 and also user
- provided memory handlers, ff_memalloc and ff_memfree function must be
- added to the project. The value defines number of files can be opened
- per volume. */
-
-
-#endif /* _FFCONFIG */
projects / pub / lufa.git / blobdiff