Minor documentation improvements.

[pub/lufa.git] / LUFA / DoxygenPages / ChangeLog.txt

diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt
index ffe1bd0..98e5bdd 100644 (file)
--- a/LUFA/DoxygenPages/ChangeLog.txt
+++ b/LUFA/DoxygenPages/ChangeLog.txt
@@ -9,23 +9,59 @@
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
   *  <b>New:</b>
   *  - Library Applications:
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX
   *  <b>New:</b>
   *  - Library Applications:

+  *   - Added new Bulk Vendor low level device demo
+  *
+  *  <b>Changed:</b>
+  *  - Library Applications:
+  *   - Refactored out USB interface IDs in the demo applications into enums (thanks to Laszlo Monda)
+  *
+  *  \section Sec_ChangeLog130901 Version 130901
+  *  <b>New:</b>
+  *  - Core:
+  *   - Added additional MIDI command definitions to the MIDI class driver (thanks to Daniel Dreibrodt)
+  *   - Added new CONCAT() and CONCAT_EXPANDED() convenience macros
+  *   - Added new Printer Device Class driver
+  *   - Added support for the XMEGA C3 Xplained board
+  *   - Added support for the U2S board (thanks to megal0maniac)
+  *   - Added TWI Master driver for the XMEGA architecture (thanks to Michael Janssen)
+  *  - Library Applications:

   *   - Added new Printer class bootloader
   *   - Added new Mass Storage class bootloader
   *   - Added new Printer class bootloader
   *   - Added new Mass Storage class bootloader

-  *   - Added additional MIDI command definitions to the MIDI class driver (thanks to Daniel Dreibrodt)
+  *   - Added XMEGA support for class driver device demos (where applicable)
+  *   - Added Python host application example for the Generic HID class driver device demo
+  *   - Added Python alternative host application for the HID class bootloader

   *
   *  <b>Changed:</b>
   *  - Core:
   *   - Updated the BUILD build system module to produce binary BIN files in addition to Intel HEX files
   *
   *  <b>Changed:</b>
   *  - Core:
   *   - Updated the BUILD build system module to produce binary BIN files in addition to Intel HEX files

+  *   - Updated the Android Accessory Class to accept version 2 protocol devices (with version 1 functionality)
+  *   - All board drivers now implement dummy functions and constants when BOARD is set to NONE
+  *   - Added missing LEDs to the XMEGA A3BU Xplained board LED driver (thanks to Michael Janssen)
+  *   - Changed board Dataflash drivers to automatically configure the appropriate SPI interface for the selected board
+  *  - Library Applications:
+  *   - Re-added Set Control Line State request handling to the CDC class bootloader to prevent issues with the .NET serial
+  *     class (thanks to Erik Lins)
+  *   - TemperatureDataLogger project dummy RTC mode now tracks real time (thanks to David Lazarus)

   *
   *  <b>Fixed:</b>
   *  - Core:
   *   - Fixed Low Speed USB devices broken when using the library HID Class driver (thanks to Michael)
   *
   *  <b>Fixed:</b>
   *  - Core:
   *   - Fixed Low Speed USB devices broken when using the library HID Class driver (thanks to Michael)

+  *   - Fixed possible register corruption in USB Host mode on AVR8 devices when ORDERED_EP_CONFIG is used (thanks to Martin Aakerberg)
+  *   - Fixed Pipe_GetBoundEndpointAddress() returning invalid endpoint directions on AVR8 architecture devices (thanks to decerri)
+  *     under some circumstances
+  *   - Fixed incorrect USB device state set when a suspended LUFA device is woken while addressed but not configured (thanks to Balaji Krishnan)
+  *   - Fixed broken USART SPI driver for the AVR8 architecture due to incorrect initialization
+  *   - Fixed re-enumeration issue of XMEGA architecture targets (thanks to Jaroslav Jedlinsky)
+  *   - Fixed error receiving PIMA events via the Still Image Host class driver

   *  - Library Applications:
   *   - Added handler for SCSI_CMD_START_STOP_UNIT in demos using the Mass Storage class, to prevent ejection errors on *nix systems due to an
   *     unknown SCSI command
   *   - Fixed incorrect HID report descriptor generated for 16-bit axis ranges by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK()
   *     macros (thanks to Armory)
   *  - Library Applications:
   *   - Added handler for SCSI_CMD_START_STOP_UNIT in demos using the Mass Storage class, to prevent ejection errors on *nix systems due to an
   *     unknown SCSI command
   *   - Fixed incorrect HID report descriptor generated for 16-bit axis ranges by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK()
   *     macros (thanks to Armory)

+  *   - Fixed incorrect HID report descriptor generated for button multiples of 8 by the HID_DESCRIPTOR_MOUSE() and HID_DESCRIPTOR_JOYSTICK()
+  *     macros

   *   - Fixed race condition in the DFU class bootloader causing failed device reprogramming in some circumstances (thanks to Luis Mendes)
   *   - Fixed race condition in the DFU class bootloader causing failed device reprogramming in some circumstances (thanks to Luis Mendes)

+  *   - Fixed incorrect time/date configuration data order in the TempDataLogger host application (thanks to David Lazarus)

   *
   *  \section Sec_ChangeLog130303 Version 130303
   *  <b>New:</b>
   *
   *  \section Sec_ChangeLog130303 Version 130303
   *  <b>New:</b>


@@ -48,7 +84,7 @@
   *   - Increased throughput in the USBtoSerial project now that data transmission is non-blocking (thanks to Joseph Lacerte)
   *   - Updated bootloader makefiles to remove dependency on the \c bc command line calculator tool
   *   - Updated AVRISP-MKII Clone Programmer project so that the SCK clock period is saved in EEPROM (thanks to Gerhard Wesser)
   *   - Increased throughput in the USBtoSerial project now that data transmission is non-blocking (thanks to Joseph Lacerte)
   *   - Updated bootloader makefiles to remove dependency on the \c bc command line calculator tool
   *   - Updated AVRISP-MKII Clone Programmer project so that the SCK clock period is saved in EEPROM (thanks to Gerhard Wesser)

-  *   - Changed all *_SendByte() function prototypes to accept a void pointer for the input buffer (thanks to Simon Küppers)
+  *   - Changed all *_SendByte() function prototypes to accept a void pointer for the input buffer (thanks to Simon Kuppers)

   *
   *  <b>Fixed:</b>
   *  - Core:
   *
   *  <b>Fixed:</b>
   *  - Core:


@@ -132,7 +168,7 @@
   *   - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid)
   *   - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin)
   *   - Fixed inverted LED logic in the OLIMEX162 board LED driver
   *   - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid)
   *   - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin)
   *   - Fixed inverted LED logic in the OLIMEX162 board LED driver

-  *   - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock)
+  *   - Fixed incorrect response to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock)

   *   - Fixed inverted LED logic in the USB2AX board LED driver
   *   - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by
   *     the stack (thanks to Jonathan Hudgins)
   *   - Fixed inverted LED logic in the USB2AX board LED driver
   *   - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by
   *     the stack (thanks to Jonathan Hudgins)


@@ -184,7 +220,7 @@
   *   - Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without
   *     having to reset the Mass Storage interface
   *   - USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors)
   *   - Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without
   *     having to reset the Mass Storage interface
   *   - USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors)

-  *   - Reordered board name definition indexes so that a mispelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY
+  *   - Reordered board name definition indexes so that a misspelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY

   *   - Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage
   *   - All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance
   *  - Library Applications:
   *   - Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage
   *   - All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance
   *  - Library Applications:


@@ -731,7 +767,7 @@
   *  - Added new RNDIS Ethernet Host ClassDriver demo
   *  - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device
   *  - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair)
   *  - Added new RNDIS Ethernet Host ClassDriver demo
   *  - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device
   *  - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair)

-  *  - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used
+  *  - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different Dataflash used

   *    on the first revision boards compared to the one mounted on later revisions
   *  - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype
   *  - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values
   *    on the first revision boards compared to the one mounted on later revisions
   *  - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype
   *  - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values


@@ -1049,7 +1085,7 @@
   *    Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe
   *    bank management API
   *  - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG)
   *    Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe
   *    bank management API
   *  - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG)

-  *  - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity
+  *  - Updated library Doxygen documentation, added groups, changed documentation macro functions to real functions for clarity

   *  - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity
   *  - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway
   *  - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream
   *  - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity
   *  - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway
   *  - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream


@@ -1265,7 +1301,7 @@
   *  - All HID demos now pass the USB.org automated HID compliance tests
   *  - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems
   *  - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks
   *  - All HID demos now pass the USB.org automated HID compliance tests
   *  - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems
   *  - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks

-  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions
+  *  - Mass Storage demo Dataflash management routines changed to use the endpoint stream functions

   *  - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file
   *  - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
   *    are reflected in the hardware (change was previously lost)
   *  - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file
   *  - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
   *    are reflected in the hardware (change was previously lost)


@@ -1321,7 +1357,7 @@
   *    size bits not required for the routines (improves compatibility with devices)
   *  - Fixed AudioInput demo - now correctly sends sampled audio to the host PC
   *  - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes
   *    size bits not required for the routines (improves compatibility with devices)
   *  - Fixed AudioInput demo - now correctly sends sampled audio to the host PC
   *  - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes

-  *  - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes
+  *  - Shrunk round-robin scheduler code slightly via the use of struct pointers rather than array indexes

   *  - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser
   *  - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder
   *  - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler
   *  - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser
   *  - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder
   *  - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler


@@ -1463,7 +1499,7 @@
   *  - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and
   *    placing board drivers in {Application Directory}/Board/
   *  - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power
   *  - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and
   *    placing board drivers in {Application Directory}/Board/
   *  - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power

-  *  - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY
+  *  - Joystick defines are now in sync with the schematics - orientation will be rotated for the USBKEY

   *  - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register
   *  - Fixed data transfers to devices when in host mode
   *  - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to
   *  - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register
   *  - Fixed data transfers to devices when in host mode
   *  - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to


@@ -1498,7 +1534,7 @@
   *  - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer
   *    pointer is passed
   *  - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables
   *  - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer
   *    pointer is passed
   *  - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables

-  *    dependant on size of memory parameters passed in via the user project's makefile
+  *    dependent on size of memory parameters passed in via the user project's makefile

   *  - Fixed incorrect device reset routine being called in USBTask
   *  - Devices which do not connect within the standard 300mS are now supported
   *  - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being
   *  - Fixed incorrect device reset routine being called in USBTask
   *  - Devices which do not connect within the standard 300mS are now supported
   *  - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being