-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * Mass Storage Device commands, to issue MSD commands to the device for\r
- * reading device status, capacity, and other characteristics. This file\r
- * also contains block read and write functions, so that device blocks\r
- * can be read and written. In general, these functions would be chained\r
- * to a FAT library to give file-level access to an attached device's contents.\r
- *\r
- * \note Many Mass Storage devices on the market are non-compliant to the\r
- * specifications and thus can prove difficult to interface with. It\r
- * may be necessary to retry the functions in the module several times\r
- * after they have returned and error to successfully send the command\r
- * to the device. Some devices may also need to have the stream function\r
- * timeout period extended beyond 100ms (some badly designed devices exceeding\r
- * 1.5 seconds occasionally) by defining USB_STREAM_TIMEOUT_MS to a\r
- * larger value in the project makefile and passing it to the compiler\r
- * via the -D switch.\r
- */\r
- \r
-#define INCLUDE_FROM_MASSSTORE_COMMANDS_C\r
-#include "MassStoreCommands.h"\r
-\r
-/* Globals: */\r
-/** Current CBW to send to the device. This is automatically filled by the routines\r
- * in this file and is not externally accessible.\r
- */\r
-static CommandBlockWrapper_t SCSICommandBlock;\r
-\r
-/** Current CSW received from the device. This is automatically filled by the routines\r
- * in this file and is externally accessible so that the return codes may be checked.\r
- */\r
-CommandStatusWrapper_t SCSICommandStatus;\r
-\r
-/** Current Tag value used in issued CBWs to the device. This is automatically incremented\r
- * by the routines in this file, and is not externally accessible.\r
- */\r
-static uint32_t MassStore_Tag = 1;\r
-\r
-\r
-/** Routine to send the current CBW to the device, and increment the Tag value as needed.\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-static uint8_t MassStore_SendCommand(void)\r
-{\r
- uint8_t ErrorCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* Each transmission should have a unique tag value, excluding values 0 and 0xFFFFFFFF */\r
- if (++MassStore_Tag == 0xFFFFFFFF)\r
- MassStore_Tag = 1;\r
-\r
- /* Select the OUT data pipe for CBW transmission */\r
- Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);\r
- Pipe_Unfreeze();\r
-\r
- /* Write the CBW command to the OUT pipe */\r
- if ((ErrorCode = Pipe_Write_Stream_LE(&SCSICommandBlock, sizeof(CommandBlockWrapper_t))) != PIPE_RWSTREAM_NoError)\r
- return ErrorCode;\r
-\r
- /* Send the data in the OUT pipe to the attached device */\r
- Pipe_ClearOUT();\r
- \r
- while(!(Pipe_IsOUTReady()));\r
-\r
- /* Freeze pipe after use */\r
- Pipe_Freeze();\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Waits until the attached device is ready to accept data following a CBW, checking\r
- * to ensure that the device has not stalled the transaction.\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-static uint8_t MassStore_WaitForDataReceived(void)\r
-{\r
- uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;\r
-\r
- /* Unfreeze the OUT pipe so that it can be checked */\r
- Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);\r
- Pipe_Unfreeze();\r
-\r
- /* Select the IN data pipe for data reception */\r
- Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);\r
- Pipe_Unfreeze();\r
-\r
- /* Wait until data received in the IN pipe */\r
- while (!(Pipe_IsINReceived()))\r
- {\r
- /* Check to see if a new frame has been issued (1ms elapsed) */\r
- if (USB_INT_HasOccurred(USB_INT_HSOFI))\r
- {\r
- /* Clear the flag and decrement the timeout period counter */\r
- USB_INT_Clear(USB_INT_HSOFI);\r
- TimeoutMSRem--;\r
-\r
- /* Check to see if the timeout period for the command has elapsed */\r
- if (!(TimeoutMSRem))\r
- return PIPE_RWSTREAM_Timeout;\r
- }\r
- \r
- Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);\r
-\r
- /* Check if pipe stalled (command failed by device) */\r
- if (Pipe_IsStalled())\r
- {\r
- /* Clear the stall condition on the OUT pipe */\r
- MassStore_ClearPipeStall(MASS_STORE_DATA_OUT_PIPE);\r
-\r
- return PIPE_RWSTREAM_PipeStalled;\r
- }\r
-\r
- Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);\r
-\r
- /* Check if pipe stalled (command failed by device) */\r
- if (Pipe_IsStalled())\r
- {\r
- /* Clear the stall condition on the IN pipe */\r
- MassStore_ClearPipeStall(MASS_STORE_DATA_IN_PIPE);\r
-\r
- return PIPE_RWSTREAM_PipeStalled;\r
- }\r
- \r
- /* Check to see if the device was disconnected, if so exit function */\r
- if (!(USB_IsConnected))\r
- return PIPE_RWSTREAM_DeviceDisconnected;\r
- };\r
-\r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Sends or receives the transaction's data stage to or from the attached device, reading or\r
- * writing to the nominated buffer.\r
- *\r
- * \param BufferPtr Pointer to the data buffer to read from or write to\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-static uint8_t MassStore_SendReceiveData(void* BufferPtr)\r
-{\r
- uint8_t ErrorCode = PIPE_RWSTREAM_NoError;\r
- uint16_t BytesRem = SCSICommandBlock.Header.DataTransferLength;\r
-\r
- /* Check the direction of the SCSI command data stage */\r
- if (SCSICommandBlock.Header.Flags & COMMAND_DIRECTION_DATA_IN)\r
- {\r
- /* Select the IN data pipe for data reception */\r
- Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);\r
- Pipe_Unfreeze();\r
- \r
- /* Read in the block data from the pipe */\r
- if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)\r
- return ErrorCode;\r
-\r
- /* Acknowledge the packet */\r
- Pipe_ClearIN();\r
- }\r
- else\r
- {\r
- /* Select the OUT data pipe for data transmission */\r
- Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);\r
- Pipe_Unfreeze();\r
-\r
- /* Write the block data to the pipe */\r
- if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)\r
- return ErrorCode;\r
-\r
- /* Acknowledge the packet */\r
- Pipe_ClearOUT();\r
- \r
- while (!(Pipe_IsOUTReady()));\r
- }\r
- \r
- /* Freeze used pipe after use */\r
- Pipe_Freeze();\r
-\r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Routine to receive the current CSW from the device.\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-static uint8_t MassStore_GetReturnedStatus(void)\r
-{\r
- uint8_t ErrorCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* If an error in the command ocurred, abort */\r
- if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)\r
- return ErrorCode;\r
-\r
- /* Select the IN data pipe for data reception */\r
- Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);\r
- Pipe_Unfreeze();\r
- \r
- /* Load in the CSW from the attached device */\r
- if ((ErrorCode = Pipe_Read_Stream_LE(&SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_NoError)\r
- return ErrorCode;\r
- \r
- /* Clear the data ready for next reception */\r
- Pipe_ClearIN();\r
- \r
- /* Freeze the IN pipe after use */\r
- Pipe_Freeze();\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Clears the stall condition in the attached device on the nominated endpoint number.\r
- *\r
- * \param EndpointNum Endpoint number in the attached device whose stall condition is to be cleared\r
- *\r
- * \return A value from the USB_Host_SendControlErrorCodes_t enum\r
- */\r
-uint8_t MassStore_ClearPipeStall(const uint8_t EndpointNum)\r
-{\r
- USB_ControlRequest = (USB_Request_Header_t)\r
- {\r
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),\r
- .bRequest = REQ_ClearFeature,\r
- .wValue = FEATURE_ENDPOINT_HALT,\r
- .wIndex = EndpointNum,\r
- .wLength = 0,\r
- };\r
- \r
- /* Select the control pipe for the request transfer */\r
- Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
- return USB_Host_SendControlRequest(NULL);\r
-}\r
-\r
-/** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,\r
- * readying the device for the next CBW.\r
- *\r
- * \return A value from the USB_Host_SendControlErrorCodes_t enum\r
- */\r
-uint8_t MassStore_MassStorageReset(void)\r
-{\r
- USB_ControlRequest = (USB_Request_Header_t)\r
- {\r
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),\r
- .bRequest = REQ_MassStorageReset,\r
- .wValue = 0,\r
- .wIndex = 0,\r
- .wLength = 0,\r
- };\r
- \r
- /* Select the control pipe for the request transfer */\r
- Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
- return USB_Host_SendControlRequest(NULL);\r
-}\r
-\r
-/** Issues a Mass Storage class specific request to determine the index of the highest numbered Logical\r
- * Unit in the attached device.\r
- *\r
- * \param MaxLUNIndex Pointer to the location that the maximum LUN index value should be stored\r
- *\r
- * \return A value from the USB_Host_SendControlErrorCodes_t enum\r
- */\r
-uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)\r
-{\r
- uint8_t ErrorCode;\r
-\r
- USB_ControlRequest = (USB_Request_Header_t)\r
- {\r
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),\r
- .bRequest = REQ_GetMaxLUN,\r
- .wValue = 0,\r
- .wIndex = 0,\r
- .wLength = 1,\r
- };\r
- \r
- /* Select the control pipe for the request transfer */\r
- Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
- if ((ErrorCode = USB_Host_SendControlRequest(MaxLUNIndex)) == HOST_SENDCONTROL_SetupStalled)\r
- {\r
- /* Clear the pipe stall */\r
- Pipe_ClearStall();\r
- \r
- /* Some faulty Mass Storage devices don't implement the GET_MAX_LUN request, so assume a single LUN */\r
- *MaxLUNIndex = 0; \r
- }\r
- \r
- return ErrorCode;\r
-}\r
-\r
-/** Issues a SCSI Request Sense command to the attached device, to determine the current SCSI sense information. This\r
- * gives error codes for the last issued SCSI command to the device.\r
- *\r
- * \param LUNIndex Index of the LUN inside the device the command is being addressed to\r
- * \param SensePtr Pointer to the sense data structure where the sense data from the device is to be stored\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-uint8_t MassStore_RequestSense(const uint8_t LUNIndex, const SCSI_Request_Sense_Response_t* const SensePtr)\r
-{\r
- uint8_t ReturnCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* Create a CBW with a SCSI command to issue REQUEST SENSE command */\r
- SCSICommandBlock = (CommandBlockWrapper_t)\r
- {\r
- .Header =\r
- {\r
- .Signature = CBW_SIGNATURE,\r
- .Tag = MassStore_Tag,\r
- .DataTransferLength = sizeof(SCSI_Request_Sense_Response_t),\r
- .Flags = COMMAND_DIRECTION_DATA_IN,\r
- .LUN = LUNIndex,\r
- .SCSICommandLength = 6\r
- },\r
- \r
- .SCSICommandData =\r
- {\r
- SCSI_CMD_REQUEST_SENSE,\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- sizeof(SCSI_Request_Sense_Response_t), // Allocation Length\r
- 0x00 // Unused (control)\r
- }\r
- };\r
- \r
- /* Send SCSI command to the attached device */\r
- MassStore_SendCommand();\r
-\r
- /* Wait until data received from the device */\r
- if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
-\r
- /* Read the returned sense data into the buffer */\r
- if ((ReturnCode = MassStore_SendReceiveData((uint8_t*)SensePtr)) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- } \r
- \r
- /* Read in the returned CSW from the device */\r
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the\r
- * storage medium into a buffer.\r
- *\r
- * \param LUNIndex Index of the LUN inside the device the command is being addressed to\r
- * \param BlockAddress Start block address to read from\r
- * \param Blocks Number of blocks to read from the device\r
- * \param BlockSize Size in bytes of each block to read\r
- * \param BufferPtr Pointer to the buffer where the read data is to be written to\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,\r
- const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)\r
-{\r
- uint8_t ReturnCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* Create a CBW with a SCSI command to read in the given blocks from the device */\r
- SCSICommandBlock = (CommandBlockWrapper_t)\r
- {\r
- .Header =\r
- {\r
- .Signature = CBW_SIGNATURE,\r
- .Tag = MassStore_Tag,\r
- .DataTransferLength = ((uint32_t)Blocks * BlockSize),\r
- .Flags = COMMAND_DIRECTION_DATA_IN,\r
- .LUN = LUNIndex,\r
- .SCSICommandLength = 10\r
- },\r
- \r
- .SCSICommandData =\r
- {\r
- SCSI_CMD_READ_10,\r
- 0x00, // Unused (control bits, all off)\r
- (BlockAddress >> 24), // MSB of Block Address\r
- (BlockAddress >> 16),\r
- (BlockAddress >> 8),\r
- (BlockAddress & 0xFF), // LSB of Block Address\r
- 0x00, // Unused (reserved)\r
- 0x00, // MSB of Total Blocks to Read\r
- Blocks, // LSB of Total Blocks to Read\r
- 0x00 // Unused (control)\r
- }\r
- };\r
- \r
- /* Send SCSI command to the attached device */\r
- MassStore_SendCommand();\r
-\r
- /* Wait until data received from the device */\r
- if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
-\r
- /* Read the returned block data into the buffer */\r
- if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- } \r
- \r
- /* Read in the returned CSW from the device */\r
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the\r
- * storage medium from a buffer.\r
- *\r
- * \param LUNIndex Index of the LUN inside the device the command is being addressed to\r
- * \param BlockAddress Start block address to write to\r
- * \param Blocks Number of blocks to write to in the device\r
- * \param BlockSize Size in bytes of each block to write\r
- * \param BufferPtr Pointer to the buffer where the write data is to be sourced from\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, const uint32_t BlockAddress,\r
- const uint8_t Blocks, const uint16_t BlockSize, void* BufferPtr)\r
-{\r
- uint8_t ReturnCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* Create a CBW with a SCSI command to write the given blocks to the device */\r
- SCSICommandBlock = (CommandBlockWrapper_t)\r
- {\r
- .Header =\r
- {\r
- .Signature = CBW_SIGNATURE,\r
- .Tag = MassStore_Tag,\r
- .DataTransferLength = ((uint32_t)Blocks * BlockSize),\r
- .Flags = COMMAND_DIRECTION_DATA_OUT,\r
- .LUN = LUNIndex,\r
- .SCSICommandLength = 10\r
- },\r
- \r
- .SCSICommandData =\r
- {\r
- SCSI_CMD_WRITE_10,\r
- 0x00, // Unused (control bits, all off)\r
- (BlockAddress >> 24), // MSB of Block Address\r
- (BlockAddress >> 16),\r
- (BlockAddress >> 8),\r
- (BlockAddress & 0xFF), // LSB of Block Address\r
- 0x00, // Unused (reserved)\r
- 0x00, // MSB of Total Blocks to Write\r
- Blocks, // LSB of Total Blocks to Write\r
- 0x00 // Unused (control)\r
- }\r
- };\r
- \r
- /* Send SCSI command to the attached device */\r
- MassStore_SendCommand();\r
-\r
- /* Write the data to the device from the buffer */\r
- if ((ReturnCode = MassStore_SendReceiveData(BufferPtr)) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- } \r
- \r
- /* Read in the returned CSW from the device */\r
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept\r
- * other commands.\r
- *\r
- * \param LUNIndex Index of the LUN inside the device the command is being addressed to\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)\r
-{\r
- uint8_t ReturnCode = PIPE_RWSTREAM_NoError; \r
-\r
- /* Create a CBW with a SCSI command to issue TEST UNIT READY command */\r
- SCSICommandBlock = (CommandBlockWrapper_t)\r
- {\r
- .Header =\r
- {\r
- .Signature = CBW_SIGNATURE,\r
- .Tag = MassStore_Tag,\r
- .DataTransferLength = 0,\r
- .Flags = COMMAND_DIRECTION_DATA_IN,\r
- .LUN = LUNIndex,\r
- .SCSICommandLength = 6\r
- },\r
- \r
- .SCSICommandData =\r
- {\r
- SCSI_CMD_TEST_UNIT_READY,\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- 0x00 // Unused (control)\r
- }\r
- };\r
- \r
- /* Send SCSI command to the attached device */\r
- MassStore_SendCommand();\r
-\r
- /* Read in the returned CSW from the device */\r
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the\r
- * given Logical Unit within the device.\r
- *\r
- * \param LUNIndex Index of the LUN inside the device the command is being addressed to\r
- * \param CapacityPtr Device capacity structure where the capacity data is to be stored\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, SCSI_Capacity_t* const CapacityPtr)\r
-{\r
- uint8_t ReturnCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* Create a CBW with a SCSI command to issue READ CAPACITY command */\r
- SCSICommandBlock = (CommandBlockWrapper_t)\r
- {\r
- .Header =\r
- {\r
- .Signature = CBW_SIGNATURE,\r
- .Tag = MassStore_Tag,\r
- .DataTransferLength = sizeof(SCSI_Capacity_t),\r
- .Flags = COMMAND_DIRECTION_DATA_IN,\r
- .LUN = LUNIndex,\r
- .SCSICommandLength = 10\r
- },\r
- \r
- .SCSICommandData =\r
- {\r
- SCSI_CMD_READ_CAPACITY_10,\r
- 0x00, // Reserved\r
- 0x00, // MSB of Logical block address\r
- 0x00,\r
- 0x00,\r
- 0x00, // LSB of Logical block address\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- 0x00, // Partial Medium Indicator\r
- 0x00 // Unused (control)\r
- }\r
- };\r
- \r
- /* Send SCSI command to the attached device */\r
- MassStore_SendCommand();\r
-\r
- /* Wait until data received from the device */\r
- if ((ReturnCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
-\r
- /* Read the returned capacity data into the buffer */\r
- if ((ReturnCode = MassStore_SendReceiveData(CapacityPtr)) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- /* Endian-correct the read data */\r
- CapacityPtr->Blocks = SwapEndian_32(CapacityPtr->Blocks);\r
- CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize);\r
- \r
- /* Read in the returned CSW from the device */\r
- if ((ReturnCode = MassStore_GetReturnedStatus()) != PIPE_RWSTREAM_NoError)\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
-\r
-/** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from\r
- * being removed. This is a legacy command for SCSI disks with removable storage (such as ZIP disks), but should still\r
- * be issued before the first read or write command is sent.\r
- *\r
- * \param LUNIndex Index of the LUN inside the device the command is being addressed to\r
- * \param PreventRemoval Whether or not the LUN media should be locked to prevent removal or not\r
- *\r
- * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum\r
- */\r
-uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, const bool PreventRemoval)\r
-{\r
- uint8_t ReturnCode = PIPE_RWSTREAM_NoError;\r
-\r
- /* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */\r
- SCSICommandBlock = (CommandBlockWrapper_t)\r
- {\r
- .Header =\r
- {\r
- .Signature = CBW_SIGNATURE,\r
- .Tag = MassStore_Tag,\r
- .DataTransferLength = 0,\r
- .Flags = COMMAND_DIRECTION_DATA_OUT,\r
- .LUN = LUNIndex,\r
- .SCSICommandLength = 6\r
- },\r
- \r
- .SCSICommandData =\r
- {\r
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL,\r
- 0x00, // Reserved\r
- 0x00, // Reserved\r
- PreventRemoval, // Prevent flag\r
- 0x00, // Reserved\r
- 0x00 // Unused (control)\r
- }\r
- };\r
- \r
- /* Send SCSI command to the attached device */\r
- MassStore_SendCommand();\r
-\r
- /* Read in the returned CSW from the device */\r
- if ((ReturnCode = MassStore_GetReturnedStatus()))\r
- {\r
- Pipe_Freeze();\r
- return ReturnCode;\r
- }\r
- \r
- return PIPE_RWSTREAM_NoError;\r
-}\r
projects / pub / lufa.git / blobdiff