Add the start of a new Mass Storage class bootloader.

[pub/lufa.git] / Bootloaders / CDC / BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index 1777967..11fefab 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -10,10 +10,10 @@
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs (AT90USBxxx7)
- *  - Series 6 USB AVRs (AT90USBxxx6)
- *  - Series 4 USB AVRs (ATMEGAxxU4)
- *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
  *  \section Sec_Info USB Information:
  *
@@ -37,7 +37,7 @@
  *    <td>USBIF CDC Class Standard</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
@@ -111,7 +111,7 @@
  *  #define BOOTLOADER_MAGIC_SIGNATURE         0xDCFB
  *
  *  #define BOOTLOADER_CLASS_SIGNATURE_START   (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4))
- *  #define BOOTLOADER_CDC_SIGNATURE           0xCDC1
+ *  #define BOOTLOADER_CDC_SIGNATURE           0xDF20
  *
  *  #define BOOTLOADER_ADDRESS_START           (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8))
  *  #define BOOTLOADER_ADDRESS_LENGTH          4
@@ -173,25 +173,25 @@
  *   </tr>
  *   <tr>
  *    <td>NO_BLOCK_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
  *        using the byte-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_EEPROM_BYTE_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
  *        to be made using the block-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_FLASH_BYTE_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
  *        to be made using the block-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>
  *   </tr>
  *  </table>