Update host C# applications for VS2010. Make LEDNotifier project host applications...

[pub/lufa.git] / Bootloaders / CDC / BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index 4225a40..ab45ad1 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -86,6 +86,25 @@
  *
  *  Refer to the AVRDude project documentation for additional usage instructions.
  *
+ *  \section Sec_API User Application API
+ *
+ *  Several user application functions for FLASH and other special memory area manipulations are exposed by the bootloader,
+ *  allowing the user application to call into the bootloader at runtime to read and write FLASH data.
+ *
+ *  By default, the bootloader API jump table is located 32 bytes from the end of the device's FLASH memory, and follows the
+ *  following layout:
+ *
+ *  \code
+ *  #define BOOTLOADER_API_START(Index)        (void*)(((FLASHEND - 32) + (2 * Index)) / 2)
+ *  void    (*BootloaderAPI_ErasePage)(uint32_t Address)               = BOOTLOADER_API_START(0);
+ *  void    (*BootloaderAPI_WritePage)(uint32_t Address)               = BOOTLOADER_API_START(1);
+ *  void    (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_START(2);
+ *  uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address)           = BOOTLOADER_API_START(3);
+ *  uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address)                = BOOTLOADER_API_START(4);
+ *  uint8_t (*BootloaderAPI_ReadLock)(void)                            = BOOTLOADER_API_START(5);
+ *  void    (*BootloaderAPI_WriteLock)(uint8_t LockBits)               = BOOTLOADER_API_START(6);
+ *  \endcode
+ *
  *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
@@ -95,24 +114,24 @@
  *    <td>NO_BLOCK_SUPPORT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made
- *        using the byte-level commands.
+ *        using the byte-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_EEPROM_BYTE_SUPPORT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes
- *        to be made using the block-level commands.
+ *        to be made using the block-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_FLASH_BYTE_SUPPORT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes
- *        to be made using the block-level commands.
+ *        to be made using the block-level commands.</td>
  *   </tr>
  *   <tr>
  *    <td>NO_LOCK_BYTE_WRITE_SUPPORT</td>
  *    <td>Makefile LUFA_OPTS</td>
- *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set progmatically.
+ *    <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td>
  *   </tr>
  *  </table>
  */